It really reduces the temperature levels of the piping and it really add some nice engine bay bling too

Recommended for people who want cooler air for their turbo vehicles or even N/A engines with high heat areas

Unfortunately that's the only way until they invent something that gets cooler as the engine gets hotter.

Tested with infrared before and after and notice a 10 degree cooler intake temp (also logged on Cobb AP).

Can definitely say it helps a bit, temps are more stable and it retains some of the heat better

As per the heed of other peoples reviews around the internet with premature peeling of the tape, I first sprayed the item I was wrapping with 3M super 77 spray adhesive

It keeps the temps nice and cool in the intercooler on the turbo side

Absolutely gorgeous, definitely keeps my intake temps down

When it comes to protecting items in your engine bay from

n’t wrinkle on you

The item was easy to apply, simple to cut and easy to peel the backing

As per the heed of other peoples reviews around the internet with premature peeling of the tape, I first sprayed the item I was wrapping with 3M super 77 spray adhesive

This is the best gold tape out there.

Besides that you’re good as gold!

But is kinda expensive =l

The gold not only looks good, but works really good as well.

If you're like me and want to cool your air intake temperatures, you'll have to get a turbo

n’t wrinkle on you

As per the heed of other peoples reviews around the internet with premature peeling of the tape, I first sprayed the item I was wrapping with 3M super 77 spray adhesive

Reduced temperatures where applied and adhesive was adequate

n’t wrinkle on you

n’t wrinkle on you

Wow I had bought this exact brand, ran out of it on my project, bought more and the quality is trash

Buying at your local auto parts store helps to ensure you're receiving genuine DEI quality

But is kinda expensive =l

but I hope it is deflecting enough heat from the steel divider to impact intake air temps

Sticks on very well, even with my heat shield slightly warped from the heat of my turbo/down pipe, the gold tape still sticks on great and keeps my valve cover from melting

I installed it on the intake manifold and intake piping on my car and this stuff has really helped with the heat soak that plagued my car

Most great heat reflecter easy to apply & not easy to get damaged

Perfect heat shield material for bottom of my motorcycle fuel tank.

I have an A/C drain tube that sits dangerously close to my aftermarket exhaust

Adhesive isn't that sticky even though I've cleaned the surface where I put it

Does not stick well to textured surfaces like intake air boxes.

I didn't have any trouble with the tape sticking to anything (intercooler or AC tubing), although I cleaned all the surfaces before

I cleaned the surface, scuffed it up so it would stick, cleaned it again, and layed it on

n’t wrinkle on you

Very easy install.

But is kinda expensive =l

Have not put the tape through any heat tests yet, but it came packaged well and was easy to apply and trim for a clean install.

looks great, easy install just clean my old intake with rubbing alcoholprep is key just don't want it coming off

It's on the intercooler reservoir tank, the A/C blower box, windshield wiper tank, air filter housing and several other smaller parts.

I have an A/C drain tube that sits dangerously close to my aftermarket exhaust

But is kinda expensive =l

Love the bright color though and definitely cools.

EXCELLENT alternative to anodizing..nic2 bright color and heat reflection..used on my trunk mounted water/methanol/battery box, around exhaust system, transmission, engine compartment and downpipes...

Adhesive sticks well , easy to use ...looks amazing

n’t wrinkle on you

I have an A/C drain tube that sits dangerously close to my aftermarket exhaust

It's on the intercooler reservoir tank, the A/C blower box, windshield wiper tank, air filter housing and several other smaller parts.

Adhesive sticks very well

Overall i used this with heat proof insulation foam to make a real cold air intake and made all the difference.

And the intake tube was just as hot as before

I used this material to make a true cold air intake where heat from the engine bay doesnt get into the intake

I bought this product to wrap my plastic air intake duct to help keep the air cooler as it passes through there

so I ordered this and wrapped the intake piping of my focus ST to create a REAL cold air