Aguilar OBP-3SK/PP Onboard Preamp - 2024 report by Whydis
Aguilar OBP-3SK/PP Onboard Preamp
Product Description
The OBP-3 is Aguilar's most flexible onboard preamp design, providing +/-18dB of cut and boost at 40Hz, +/- 16dB of cut and boost at either 400Hz or 800Hz and +/- 16dB of treble cut and boost at 6.5 kHz. The OBP-3 has multiple wir...
The mid frequency select switch is an awesome feature with boost and cut at 500hz and 800 hz, its all that you need in the mid department, also the highs are crystal clear but has a lil bit of hiss when boosted fully.
You are reading snippets from reviews of Aguilar OBP-3SK/PP Onboard Preamp
The mid frequency select switch is an awesome feature with boost and cut at 500hz and 800 hz, its all that you need in the mid department, also the highs are crystal clear but has a lil bit of hiss when boosted fully.
You are reading snippets from reviews of Aguilar OBP-3SK/PP Onboard Preamp
The mid frequency select switch is an awesome feature with boost and cut at 500hz and 800 hz, its all that you need in the mid department, also the highs are crystal clear but has a lil bit of hiss when boosted fully.
You are reading snippets from reviews of Aguilar OBP-3SK/PP Onboard Preamp
The OBP-3 magnifies the larger magnets, custom placements of them in the pickup design, and windings to create the perfect combination along with the Spector's "bolt-on" design and woods used to give us a massive tonal *punch*... or not when it's not called for.
You are reading snippets from reviews of Aguilar OBP-3SK/PP Onboard Preamp
Already it still had a nice thrashy low end, punchy tone but still had a nice clean jazz tone
So the push pull option for the mids helped me out alot bringing these two ideal tones more presence
I can't get a bad tone out of it.
You are reading snippets from reviews of Aguilar OBP-3SK/PP Onboard Preamp
More about Aguilar OBP-3SK/PP Onboard Preamp
Product Description
The OBP-3 is Aguilar's most flexible onboard preamp design, providing +/-18dB of cut and boost at 40Hz, +/- 16dB of cut and boost at either 400Hz or 800Hz and +/- 16dB of treble cut and boost at 6.5 kHz
The OBP-3 has multiple wiring options, and can be wired with a push/pull on the Mid pot for midrange frequency selection.
Amazon.com
The OBP-3 is Aguilar's most flexible onboard preamp design, providing +/-18dB of cut and boost at 40Hz, +/- 16dB of cut and boost at either 400Hz or 800Hz and +/- 16dB of treble cut and boost at 6.5 kHz
The OBP-3 has multiple wiring options, and can be wired with either a mini-toggle or internal dip-switch for midrange frequency selection
The OBP-3SK/PP includes a stacked Treble/Bass pot and a separate Mid pot
The Mid pot is push/pull for Midrange frequency selection
Bass control: plus/minus 18 dB @ 40 Hz
Mid control: plus/minus 16 dB @ 400Hz or 800 Hz
User selectable frequency center
Treble control: plus/minus 16 dB @ 6.5 KHz
Input impedance: 1 meg ohm Output impedance: 100 ohm 9 or 18 volts operation
Additional 6dB with 18 volts
Distortion: .019 into 10k ohm load Noise: -95 dBm unweighted
Battery life: 324 hours Wire lead length: 6.50 inches Low noise discrete FET input stage, center detent 50 K linear pots,with a dual concentric pot available
Dimensions: 0.98"W x 0.98"L x 0.59"D Warranty: Three year limited warranty.
Save on
Pinterest