• Reviews around strip (4.41 of 5)

    Bason Lighting LED RGBW USB Bias Light for 30 to 40 inches Flat HDTV, Mulit Color + Pure White Backlight Strip Lighting Sync Switch On/Off with TV Dimmable Remote Control

    • I love these light strips
    • I had to use the side strips for the top strips and the top strips I can't even use they are so long
    • Had part of the LED strip give out a glare.
    • Its just an LED strip with a little micro controller making different RGB patterns pop
    • LED Color strips added to you TV or projector screen is a great way to cheaply make your viewing experience more intense.
    • I have put my remote for the LED strips away and haven't had to touch it since the first day (unless I want to change the color, but I like blue, so blue it will stay).Great product, highly recommend, would buy again, might buy again for the other TV in the house.
    • We're very pleased with these LED light strips.
    • For some reason the 18" strip Also had a male (pinned) connector at the distal end so I was again forced to connect to the last 30" LED strip directly which took some twisting and repositioning
    • Good quality sticky strips
    • Pretty basic LED strips with a controller for modes and colors which of there's plenty to choose from
    • The lighting itself is wonderful, wish the strips were stickier
    • The LED strip have a high quality feel to it and feels very durable.
    • This is my third run at putting color LED strips on the backs of mounted televisions
    • There was exactly enough strip to make the circumference around my 65" television
    • Also, make sure when connecting the LED strips to line up the connection pins designated (Red,Blue,Green, Ground) exactly all the way through or the completed array won't light up
    • We recently received our RGB LED strip.
    • The sticky backing on the LED strips makes it easy to attach them to the back of the TV at first, but I've been having the bottom strip fall off lately (after 5 months of light use and little/no movement)
    • The LED strip also remembers what color and brightness you set last
    • After installing, 3 of 4 LED strips lit up then shut off, and no longer worked after that
    • These things handle abuse though, i bent and twisted the connectors and LED strips, removing them numerous times in order to find the perfect fit and they stick and work acceptably well
    • At $42.99, I think these lights are a lil over priced (worth $25-30 to me) but they are sturdy light strips
    • These light strips work great - it just about fits our 60" TV, so I don't think it would fit a larger TV size
    • The strips are perfect; I love that they come in 4 separate strips with connectors designed to handle corners
    • But......I went with these for the reason that the strips were more precise in tv size.
    • the strips did not fall down at all and that was with me even removing one strip and sticking it back on.
    • After removing the light strips a few times, the adhesive completely tore off of the LED strip and I had to improvise.
    • The LED strip comes on a reel with four extensions for making the corners easy, so just be sure to clean your TV with an alcohol pad to get any residue off
    • This lighting strip is pretty awesome - easy to install, and it's a very cool addition to the family room
    • This lighting strip is pretty awesome - easy to install, and it's a very cool addition to the family room
    • The strip the was suddenly working, but it and another strip were not matching in color
    • Also, these are not "low-profile" LED strips.
    • Only thing I caution about is on curved TVs, the lights do show a bit from the side if you look instead of being completely hidden, not a product defect although if the top and bottom strips were just a bit shorter would have most likely been completely hidden.
    • This is the third LED bias lighting strip I purchased
    • The construction seems good as the LEDs are encased within a flexible plastic strip and they fit a 42" TV perfectly.
    • This is the 3rd set of LED strips i've purchased (previous ones were from other brands
    • -20" LED strips that can be cut to length, 4 pin connectors and female to female extensions
    • The one thing I wasn't planning on was the stand for my TV blocking the path of the lights, so I had to go up and over the stand (not the LED strips' fault, so no stars deducted for that)
    • The adhesive literally tears away from the LED strips when the backing is removed; it's like the product has been sitting in a warehouse somewhere for years, slowly degrading
    • The problem with this LED strip is that the light is blue, even when it is on the white setting
    • Pretty cool set of super bright LED strip lights that plug right into the USB port on your TV
    • Good quality sticky strips
    • The reason being is that every product that I have ever bought that uses 3M tape, the protective strip peels off flawlessly
    • I just opened the box, tried to install, and every strip has an issue.
    • Received LED strips about two days after order was placed
    • This powered light strip is better than I was expecting
    • Adjusting for this hasn't affected the quality of the LED strip one bit
    • Tested them all and found out a faulty strip end connector on one of the 3.82Ft strips was bad...maybe a bad solder joint or resistor
    • After that, the strip had gone nearly completely dry and was constantly falling off of the TV
    • Besides that obvious and crucial flaw, the strips themselves seem nice and the remote works well
    • Besides that obvious and crucial flaw, the strips themselves seem nice and the remote works well
    • Here is wherr the CON comes in, The LED strips should have all had Female connections at both ends
    • But whenever I change the lights using the LED strip's remote while I have Netflix playing, it pauses the Netflix program
    • One problem (and its quite a big one) is that the instructions call for plugging the LED strip into the USB port into the back of the TV, to which I obliged
    • Pros:-USB allows to plug into TV with auto on and off-Lights are easy to place and covers whole TV-Remote works fine even with sensor hidden behind tv-LED strips are high quality, waterproof material
    • I love this LED light strip
    • There are also three flexible ribbon strips that can fold and twist and are used to connect the vertical strips to the horizontal strips at each corner
    • The tape is strong enough on the LED strip to stick to odd bumps/depressions on the back of the TV without issue.
    • This seems like an inconvenience until I turn the TV back on and the LED controller's memory turns the LED strips back on automatically
    • These LED light strips make my room look way more cool
    • the last LED strip in the chain was DOA
    • Overall it's an okay product and I am happy that it is still working, but a little dismayed by the fact that it's not really different than any LED strip with remote and adhesive backing (and some of those are cheaper).Side note: Pay attention to what's behind/around your TV near where you may mount these lights
    • The remote sensor for the LED strip is located at the bottom of the main strip that connects to the USB power cord.
    • I was actually pleasantly surprised at how sturdy these strips felt.
    • Not at all what I was expecting with 4 LED strips.
    • The LED strips came wound on a film style reel
    • I tried to do it as DIY before by cutting LED strip, but this package is worth the money
    • Received comment from Bason concerning the issue with male and female ends on the LED strips.
    • Strip has extremely pungent chemical smell and the USB adapter is very short
    • Ideally the strips would have 90 degree connectors that could swivel in either direction (I believe this is a remnant of the fact that these LED light strips are not intended specifically for TVs, but rather just to be stuck on anything and therefore have straight connectors, so you could run them along under a shelf or something....if this was made specifically for TVs should consider that all TVs are rectangular, would make more sense to have connector wires more suitable for a TV).
    • Relatively easy install and adhesive backing on the LED strips is reasonably strong
    • I love this led strip
    • However, the LED strips that come with this are far too large for my TV, despite being advertised for exactly that size
    • When attempting to adhere the tape, we pushed too firmly where the tape curved around the corner and broke the light strip inside causing it to no longer light up.
    • The adhesive holds the strip securely and it works perfectly
    • My set had the power strip with pins at the distal end meaning I could not use a connector strip to connect to the next LED strip
    • Bought this to replace my old LED strip and this is by far superior
    • I had one defective strip and they sent me a whole new batch
    • You have to be careful when peeling the plastic off of the back of the LED strips (they don't peel properly)
    • The only downfall is that the lights are not as vivid as I imagined they would be, but this may also be because I have blue walls
    • They all love it as much as I like it