Whydis Logo
Computers & Accessories Tablets

  • Reviews around heat sink (1.27 of 5)
    ★★★★★
    ★★★★★

    BEAMTECH H11 LED Headlight Bulb, 50W 6500K 8000Lumens Extremely Brigh H8 H9 CSP Chips Conversion Kit

    • Unable to get the dust cap installed because the large heat sink was in the way.
    • Heat sink is FAR TOO LARGE to fit in stock headlight housings.
    • I had to make a small modification to make room for the heat sink.
    • The Heat sink was too large to close housing on my stock 2009 1500 Silverado
    • Look to be good quality, Fan'less design, I chose the heat sink type because of application is off
    • The heat sink is too wide
    • The heat sink was sticking to far out
    • This product doesn't fit a 2014 Ford Focus, the heat sink is too large to be able to turn the bulb into the lock position
    • this allows a lot of clearance and air flow for this large heat sink
    • To get the cap to seat you do have to tuck the cable under the heat sink
    • The heat-sink is too large and prevents the bulb from seating properly
    • The Heat sink is too large and has the wiring coming out the back to not allow the dust caps on the headlight assembly to properly fit.
    • The headlight heat sink is too long and won't allow the cover to be placed back on
    • The oblong shape of the heat sink made contact with the side of the head light well and kept it from seating properly, keeping you from screwing it in.
    • Heat sink is right up next to edge of head light housing
    • And what love most is : no moving partsJust a heat sink in the back no worries about noise or Rf interference
    • The heat sink is to big
    • So, when I go to put the dust cover back on and it won't screw in because the heat sink is too big, I was upset
    • it does not fit the heat sink is too large
    • The heat sink hits the housing when trying to lock it in place.
    • LED light stem and heat sink
    • but I would recommend getting a bigger dust cover as the OEM cover is a bit on the smaller size now with the heat sinks of the LED's
    • After installation, be prepared to receive quite a few high beam flashes as these are broadly casting, and bright as h*ll
    • With these, I didn't have to worry as they have their own little line
    • n’t have to worry about them not working!!!
    • n’t hear any fan noises like
    • n’t give me any problem
    • Purchased these for my 2014 Jeep Grand Cherokee, they’re much brighter than previous LED’s I’ve purchased for my vehicle
    • Tried it out on a 2018 Honda Pilot with projector headlights and they work GREAT!!!I have tried several brands of LED’s and these Beamtechs H11’s are the real deal.