Simple & easy to setup with great sound quality for a nice price.
Building quality is good for the price and the performance to cost is awesome
The price was cheap enough to be worth the gamble; I've used Behringer things a few times in the past, but never an interface, and was worried it might be too junky to be usable
In my opinion its a great audio interface at a very affordable price
Sounds good, low noise, no latentency, high quality, good price!
Very straightforward, works as advertised, perfect for the audio needs of a movie making novice!
I bought this interface to use with the AT2035 Microphone, it works as advertised but it requires some important setup steps or else it wouldn't work well- Important STEPS for Windows USERS:1- (CRUCIAL STEP
The unit does not work as advertised...the Inst2 input is non-existent
As far as I can tell, the interface works as advertised
since it doesn't work as I intend it to, I'm giving it a 2 star until it gets fixed.
Absolutely useless product registration procedure caused me to lose hours out of my day .. screw any company that disregards the value of my time to this degree .. who the hell knows what will happen next (if anything), but I suspect this one's a monumental lemon .. don't waste your time!
since it doesn't work as I intend it to, I'm giving it a 2 star until it gets fixed.
This little audio interface is simple, basic , very portable, and a great value.
Great product as expected from Beringer on the price point it delivers great value
The U-Phoria ended all that madness because it has it's own Windows 10 driver
For its price, it's about as simple and intuitive as it gets
I found this unit while looking for something a bit more portable than my normal setup, primarily for recording guitar and bass direct to laptop, as well as to drive high impedance phones and some voice demo work
I used this device to replace a Mackie ProFX 8 Mixer board for my voiceover work, as well as for lightweight music production.
The phantom power works as it should, although, there is but a single switch which means additional gear may be required if you are mixing sound sources that don’t play well with phantom power
since it doesn't work as I intend it to, I'm giving it a 2 star until it gets fixed.
The phantom power works as it should, although, there is but a single switch which means additional gear may be required if you are mixing sound sources that don’t play well with phantom power
I used this device to replace a Mackie ProFX 8 Mixer board for my voiceover work, as well as for lightweight music production.
I found this unit while looking for something a bit more portable than my normal setup, primarily for recording guitar and bass direct to laptop, as well as to drive high impedance phones and some voice demo work
since it doesn't work as I intend it to, I'm giving it a 2 star until it gets fixed.
Can't figure out how to get it to record a full stereo image instead of a hard panned track to either the left or right
I used this device to replace a Mackie ProFX 8 Mixer board for my voiceover work, as well as for lightweight music production.
While the speakers by no means did not sound terrible, there was a notable improvement when I finally got the Behringer device up and running
Even if I solve the compatibility issues or switch back to linux, I still have to rig it up to get around the noisy speaker outs from the badly implemented USB power
The phantom power works as it should, although, there is but a single switch which means additional gear may be required if you are mixing sound sources that don’t play well with phantom power
The whole reason I bought this interface was so I could get a reliable, good, clean output to my new expensive speakers
Previously I was using Guitar rig but their drivers no longer worked for me.
I used this device to replace a Mackie ProFX 8 Mixer board for my voiceover work, as well as for lightweight music production.
This was able to also record line level from a passive guitar pickup with transparent quality.
Update it works fine with the Mic, the guitar simply just doesn't work with it.
I had some issues with the line level signal using a bass a guitar here and there, but now it is impossible to do any tracking as the playback is littered with crackling and popping
Fit and finish is great, but material is cheap plastic.
The top mounted plastic dials are a bit too cheap-feeling for my taste and the fact is that you can get something better, from the same company, by just spending a few extra bucks.
A far cry from cheap plastic Behringer products of the previous decade, this unit sports an all metal chassis and cover
Plastic, feels cheap, and just small audio gibberish I'll save yallOther thoughts
Build quality is OK, but the knobs on top feel like hollow plastic that could break easy.
The phantom power works as it should, although, there is but a single switch which means additional gear may be required if you are mixing sound sources that don’t play well with phantom power
I found this unit while looking for something a bit more portable than my normal setup, primarily for recording guitar and bass direct to laptop, as well as to drive high impedance phones and some voice demo work
The phantom power has enough current to power hungry mics like my old Rode NT2.Using the WASAPI drivers, and by making sure this is the only device on the USB bus to which it is connected, I am able to get round trip latency of 3ms in Sonar on a modern PC running Windows 10. without audio dropouts or glitches
For its price, it's about as simple and intuitive as it gets
I have not been able to get reasonably low latency in ASIO from the Scarlett, and the lowest I could set the buffers for the Scarlett was 424 samples (which provides well over 15msc round trip latency at 44.1K).
downloaded the Windows driver installed it and guess what people no popping or glitches on my Windows computer.
Apparently some people had problems with ASIO4ALL in Windows10 and nicely posted it for download
People I was talking to on Skype would complain that I was breaking up.
People like me who are used to the luxury of an onboard DSP zero latency monitor mixer (like the Delta has) will be a little disappointed by the lack of monitor adjustment with the simple analog input monitoring on the box itself, but it's still work-able, just a bit unusual to lack a separate control for monitor mixing
I'm not sure why people are having installation problems,
an M-Audio Fast Track Pro, Avid stopped updating the driver for it and eventually it stopped working altogether.
I endured trying to fix it for over a month and decided to return it after many futile attempts and damn near wrecking my computer, only to find out the sellers return policy was 30 days and would not take it back
I was using an M Audio Fast Track Pro and having an issue
While they were in there installing the drivers they also installed something called Slim Cleaner Plus, which seems to have significantly slowed down my computer
I love computers and at last I am making quality audio with my PC.
It's surprisingly lightweight/hollow feeling, which makes me wonder if they could have made it more
The top mounted plastic dials are a bit too cheap-feeling for my taste and the fact is that you can get something better, from the same company, by just spending a few extra bucks.
Build quality is OK, but the knobs on top feel like hollow plastic that could break easy.
Super clean sound with no audible background noise like hissing or ground loop.
For AT2020s the gain set to 11 o'clock is plenty and there's no audible noise at that level.
This audio interface will repeatedly glitch, creating deafeningly loud noise directly into your ears
I have a $200 rhode mic, and the interface can't support it, you can sometimes get good feedback from the vocals with it, but sometimes you get static noise with your vocals.
Sounds good, low noise, no latentency, high quality, good price!
You are reading snippets from reviews of BEHRINGER Audio Interface, 1x XLR/TRS 1x 1/4" 2X RCA USB, Black, 1-Channel (UM2)
More about BEHRINGER Audio Interface, 1x XLR/TRS 1x 1/4" 2X RCA USB, Black, 1-Channel (UM2)
Size:1-Channel
|
style:Audio Interface
When it's time to make recording history, You need the best audio interface you can get, and you need one you can count on
That's why BEHRINGER has introduced the new U-PHORIA series USB Audio interfaces
With 4 unique models to choose from, the U-PHORIA series has the ideal Interface to make your recording experience legendary
Midas-design preamps Midas developed the world-class preamps for the UMC204, UMC202 and UMC22 interfaces and thanks to the available +48 V phantom power, you can even use professional-grade studio condenser mics to create outstanding tracks
96 kHz precision The U-PHORIA series offers the user The ability to switch between 48 kHz and 96kHz
Both sampling rates offer better than CD recording quality for professional results
Convenient monitoring the um-2 provides power phones output with level control, direct monitor selecting, status, signal and clip LEDs which is all powered through the computer USB port
BEHRINGER offers free audio recording, editing and broadcasting software including 150 instrument and effect plug-ins available at on their website
Compose
Record
Mix.Share
For composing, recording, editing, mixing and sharing music, traktion is included with the purchase of the um-2
This DAW features a single-screen interface with features such as dynamic automation, unlimited track count, MIDI recording and support for VST and AU plug-ins
Register your U-PHORIA UM2 at Behringer.Com, and they'll reward you with a complimentary download code for the full version of traction 4
Recording and editing couldn't be easier
Features: 2x2 USB Audio Interface for microphones and instruments audiophile 48 kHz resolution compatible with popular recording software including Avid Pro Tools, Ableton Live, Steinberg Cubase, etc
Streams 2 inputs/ 2 outputs with ultra-low latency, supporting Mac OS X and windows XP or higher +48 v-powered Xenia mic preamp comparable to stand-alone boutique preamps powerful phones output with level control and direct monitor select status, signal and clip indications for perfect overview USB port for connection and power free audio recording, editing and broadcasting software plus 150 instrument/effect plug-ins.