BEHRINGER NOISE REDUCER NR300 - 2021 report by Whydis

BEHRINGER NOISE REDUCER NR300

Color:Black and Silver BEHRINGER NOISE REDUCER NR300 Ultimate Noise Reduction Effects Pedal Effectively eliminate unwanted noise and hum without altering your tone This BEHRINGER product has been designed to compete head to head with leading pro...

Reviews by Features

Job

(11 reviews)
Product

(10 reviews)
Thing

(14 reviews)
Price

(15 reviews)
Value

(7 reviews)
Function

(6 reviews)
Switch

(6 reviews)
Brand

(5 reviews)
Gate

(16 reviews)
Unit

(9 reviews)
Advertise

(8 reviews)
Sound

(20 reviews)
Feedback

(10 reviews)
Buzz

(5 reviews)
Tone killer

(3 reviews)
Pickup

(5 reviews)

Save on Pinterest

Recommended :

Reviews around job (5.00 of 5)

  • This pedal does not do the job very well because it has a very noticeable delay when you come from not playing in silence, to when you start playing
  • For a fraction of the price of some competing products, this little noise gate does a very nice job.
  • Does a decent job as a noise gate especially for the price
  • It's cheap and it's Behringer; but it's get the job done well
  • For me, this pedal does a great job at 1/4 the price of the popular competing brand.
  • Read remaining 11 reviews for job

You are reading snippets from reviews of BEHRINGER NOISE REDUCER NR300


Reviews around product (4.40 of 5)

  • Not a good product, you would be bette roff soldering a wire to your bridge and wrapping the othe rend around your wrist
  • There are no worse products that I have ever used in my 50 years as a musician.
  • Thanks Behringer for always making great and innovative products!
  • Behringer is a great company that produces solid products
  • Doesn't totally reduce noise but a decent product overall
  • Read remaining 10 reviews for product

You are reading snippets from reviews of BEHRINGER NOISE REDUCER NR300


Reviews around thing (4.23 of 5)

  • This thing works reliably and seems to perform better than my Alesis 3630 compressor/gate rack mount
  • Due to digi-tech metal master.hit and miss I guess.on the + side, I recently aquired the
  • BAD:-This thing is CHEAP
  • The fact that it cost so little makes me love this thing.
  • If money isn’t an issue for you and you play similar styles of music, take a look at the TCE Sentry, ISP Decimator & G Strong, MXR Smartgate and EHX Silencer, to name a few
  • Read remaining 14 reviews for thing

You are reading snippets from reviews of BEHRINGER NOISE REDUCER NR300


Reviews around price (4.21 of 5)

  • I have no complains and the cheap price was a plus for me.
  • This baby does what it says it does at a very reasonable price
  • I spec more from this pedal, still a good pedal and good price... faster Shipping
  • For musicians on a budget, or just want reliable gear for great prices, try the Behringer
  • Due to digi-tech metal master.hit and miss I guess.on the + side, I recently aquired the
  • Read remaining 15 reviews for price

You are reading snippets from reviews of BEHRINGER NOISE REDUCER NR300


Reviews around value (4.16 of 5)

You are reading snippets from reviews of BEHRINGER NOISE REDUCER NR300


Reviews around function (4.16 of 5)

  • Works exactly as advertised and has zero problems with the switch or functions, dependable and reliable.
  • The mute function can be a great advantage in a live aspect, but if you're looking to maximize the noise especially in a studio environment the resuction mode would be best.
  • The functions of threshold and decay work as expected, however, whenever this device is engaged, it produces the ugliest distortion artifact that I have ever heard
  • Due to digi-tech metal master.hit and miss I guess.on the + side, I recently aquired the
  • Read remaining 6 reviews for function

You are reading snippets from reviews of BEHRINGER NOISE REDUCER NR300


Reviews around switch (4.03 of 5)

  • Oh, and if you switch it to Mute, it works as an on and off switch
  • Works exactly as advertised and has zero problems with the switch or functions, dependable and reliable.
  • It’s fairly hard plastic and has a silent switch, like a Boss does
  • Due to digi-tech metal master.hit and miss I guess.on the + side, I recently aquired the
  • Read remaining 6 reviews for switch

You are reading snippets from reviews of BEHRINGER NOISE REDUCER NR300


Reviews around brand (3.86 of 5)

  • This unit works as well as my popular brand unit at a fraction of cost.
  • For me, this pedal does a great job at 1/4 the price of the popular competing brand.
  • It does its job for the price, I can't afford a

You are reading snippets from reviews of BEHRINGER NOISE REDUCER NR300


Reviews around gate (3.50 of 5)

  • I am currently using this for my vocal rig to replace an expensive rack-mount dbx compressor and gate that just doesn't work properly anymore, and seems to generate noise of its own
  • By first impression I could tell that this pedal wasnt as great as maybe a Boss pedal, but if its plugged in properly and you use the send and return feature it works as a noise gate pretty well
  • This gate although being quite simple is very easy to use and doesn't kill my tone.
  • Doesn't cut noise as well as I had hoped, but I guess I need to spend more for a better noise gate
  • Also, the gate is fast and does not chop your note's attack
  • Read remaining 16 reviews for gate

You are reading snippets from reviews of BEHRINGER NOISE REDUCER NR300


Reviews around unit (2.75 of 5)

  • So it seems like the unit itself was creating signal noise
  • Due to digi-tech metal master.hit and miss I guess.on the + side, I recently aquired the
  • Thought I'd use this cheaper unit on my secondary board that has the EHX B9 organ pedal on it (that always kinda has a little organ-sounding noise going on) but quickly found through an A/B test that this one opens up more naturally (when setting it so it kills the signal that is just noise from my distortion pedals I can still play softly and have the signal come through - the EHX had a weird delay and took a lot of signal to get the gate to open up)
  • I bought this product to tame a noisy high gain amp for a bandmate who is just too strapped to buy a more expensive unit right now
  • and you think you might need one, then I highly recommend this unit
  • Read remaining 9 reviews for unit

You are reading snippets from reviews of BEHRINGER NOISE REDUCER NR300


Reviews around advertise (2.54 of 5)

  • Due to digi-tech metal master.hit and miss I guess.on the + side, I recently aquired the
  • It performs as advertised and kills the buzz of my single coil pickups, unfortunately at a high cost.
  • Works exactly as advertised and has zero problems with the switch or functions, dependable and reliable.
  • Read remaining 8 reviews for advertise

You are reading snippets from reviews of BEHRINGER NOISE REDUCER NR300


Reviews around sound (2.35 of 5)

  • Perhaps side by side against the top competitor B**s it may not cut out as much noise but for certain it cuts out unwanted sound.
  • If you set the threshold in max, you will get a weak signal feeding to your amp, therefore weak sound
  • This means that while you're not playing, it'll block that annoying static sound your guitar and pedals make - and when you start playing, it'll lower itself so that it doesn't effect the noise of the guitar
  • Definitely helps to clean up the sound of palm muting, and for the price, this is a solid feeling pedal.
  • This device worked very well and did not impede my sound at all
  • Read remaining 20 reviews for sound

You are reading snippets from reviews of BEHRINGER NOISE REDUCER NR300


Reviews around feedback (1.54 of 5)

  • i love it, how it kills the feedback but doesnt kill the sound for your guitar
  • For instance, after just stopping playing on a distorted channel, I get incredible feedback from the other pedals
  • I can now pause playing with high gain and have silence instead of nasty feedback.
  • Horrible noise and feedback, no matter how much I cranked up the NR300's sensitivity.2.
  • i love it, how it kills the feedback but doesnt kill the sound for your guitar
  • Read remaining 10 reviews for feedback

You are reading snippets from reviews of BEHRINGER NOISE REDUCER NR300


Reviews around buzz (1.54 of 5)

  • if you want to play softer and then strum hard for higher attack, the decay works great for that, it just closes out your superfluous buzzing after a note is played, yet it still holds the sustain well on my big muff pi nano
  • The resultant distortion it adds to the sound is a loud, obnoxious buzzing that sounds like intermodulation (IM) distortion
  • It performs as advertised and kills the buzz of my single coil pickups, unfortunately at a high cost.
  • if you want to play softer and then strum hard for higher attack, the decay works great for that, it just closes out your superfluous buzzing after a note is played, yet it still holds the sustain well on my big muff pi nano
  • Worked for a few minutes then started buzzing and distorting the sound.

You are reading snippets from reviews of BEHRINGER NOISE REDUCER NR300


Reviews around tone killer (1.00 of 5)

  • Due to digi-tech metal master.hit and miss I guess.on the + side, I recently aquired the
  • Most importantly it's not a tone killer
  • Tone killer, tone killer, tone killer

You are reading snippets from reviews of BEHRINGER NOISE REDUCER NR300


Reviews around pickup (1.00 of 5)

  • In the pedals deffense I was trying to quiet a fender stratocaster with noisy pickups (non humbucker)
  • but I have also used the reduction mode when my pickups were noisy
  • I keep it on all the time because I have a guitar with extremely noisy pickups and this does not color your tone at all
  • Due to digi-tech metal master.hit and miss I guess.on the + side, I recently aquired the
  • With guitar "IN" and pedal chain on "SEND", I can set the threshold at the minimum -- it doesn't get confused between 60hz pickup noise and noise from effects pedals then.

You are reading snippets from reviews of BEHRINGER NOISE REDUCER NR300


More about BEHRINGER NOISE REDUCER NR300

  • Color:Black and Silver BEHRINGER NOISE REDUCER NR300 Ultimate Noise Reduction Effects Pedal Effectively eliminate unwanted noise and hum without altering your tone This BEHRINGER product has been designed to compete head to head with leading products on the market Preserves the original attack and envelope while leaving your playing and dynamics intact Dedicated Threshold and Decay controls plus a Mute mode for awesome flexibility Additional Send/Return loop for noise suppression of external effect units Blue status LED for effect on/off and battery check Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included) First-class electronic On/Off switch for highest signal integrity in bypass mode High-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany So you love the bite, twang and snap of single-coil pickups, but can't stand the nasty hum that comes along for the ride
  • Plug into the NOISE REDUCER NR300 and kiss unwanted noise goodbye for good! Dynamic Duo The NR300 actually functions as two pedals in one
  • In REDUCTION mode, you can adjust the dedicated THRESHOLD and DECAY dials to keep all your tone and dynamics intact, but effectively eliminate hum from the picture
  • In MUTE mode, the NR300 becomes a super-quiet on/off switch for your instrument
  • Ease of Use Operation couldn't be easier
  • The NR300 features two LEDs - one to indicate when it's activated, another to indicate when it's suppressing noise
  • You can power this hum killer with a 9 V battery or our PSU-SB DC power supply (not included)
  • And the top-quality on/off switch maintains absolutely noise-free operation
  • Value Lose the hum, but hold onto your precious single-coil tone with the ultra-affordable NOISE REDUCER NR300
  • Get one at your BEHRINGER dealer today.