From bare-bones rock and roll to a mellow folk ensemble, the 10-input, two-bus XENYX 1002 can give an intimate performance the vibe it needs to sound great in the crowd as well as on record. It's simple to transport, simple to use and simply essentia...
Based on my research, the price for this mixer is very reasonable for the quality and I would purchase it again
great price and great customer service at behringer i use the tape in and tape out to connect to my computer with ease.
The mic pre's are good, and the EQ on the first two channels are very nice (again, lookit the PRICE).HAPPY, and would recommend for a similar application.
You are reading snippets from reviews of BEHRINGER XENYX 1002
I just like to use a good mic to get good voice audio into my computer
I however purchased this mixer for use in a very simple PA setup, with two Samson SCQ6 Dynamic Super-Cardioid Handheld Mic and a computer audio input via RCA cables, and utilized a single stereo mix
You are reading snippets from reviews of BEHRINGER XENYX 1002
Ch 1 seemed to work for testing with an XLR feed from my PA, but I still had to add gain (knob half way up), and volume up almost all the way on that channel as well, and I know my signal level is great coming into this board.
If you record into software, that will give more precise levels if needed
These lack EQ, but do have adjustable level and balance
A five-segment LED indicator displays audio level, and an AC adapter is provided
While I am unsure of what sort of PA system that only requires a $100-class mixer has a proper control room, it is a convenient feature to have two pairs of stereo outputs, and can eliminate the need for a distribution amplifier (costly) or Y-cable (inexpensive but degrades signal level and signal/noise ratio) on the output
You are reading snippets from reviews of BEHRINGER XENYX 1002
Still working well as of right now after a having had it for a few months.
I was given advice to buy some that were pricier, but I liked the compact size and features at the price this one was selling for
While I am unsure of what sort of PA system that only requires a $100-class mixer has a proper control room, it is a convenient feature to have two pairs of stereo outputs, and can eliminate the need for a distribution amplifier (costly) or Y-cable (inexpensive but degrades signal level and signal/noise ratio) on the output
Minor things but enough to annoy you as to why they did not design better
You are reading snippets from reviews of BEHRINGER XENYX 1002
I however purchased this mixer for use in a very simple PA setup, with two Samson SCQ6 Dynamic Super-Cardioid Handheld Mic and a computer audio input via RCA cables, and utilized a single stereo mix
Most critical, as Behringer promises, the inputs are very clean
It's great/ideal for a dual mic set-up, as only two of the channels can adjust hi/mid/low, and the remaining 4 inputs can only have the pan and volume adjusted
Most critical, as Behringer promises, the inputs are very clean
You are reading snippets from reviews of BEHRINGER XENYX 1002
This is difficult in dark settings because the adapter's connection is keyed so as to only fit in one way (does not rotate), but the label at the top is so faint as to be not visible except under bright and direct lighting
There is also a very bright blue LED light on the top which is lit when it is plugged in that becomes very annoying
The glaring power light may be an advantage as it could be viewed for miles and would remind you to turn it off maybe
You are reading snippets from reviews of BEHRINGER XENYX 1002
More about BEHRINGER XENYX 1002
From bare-bones rock and roll to a mellow folk ensemble, the 10-input, two-bus XENYX 1002 can give an intimate performance the vibe it needs to sound great in the crowd as well as on record
It's simple to transport, simple to use and simply essential
Simple to transport, simple to use and simply essential
Click to enlarge
Two state-of-the-art XENYX mic preamps
Play music between sets via the RCA CD/tape inputs
The Ins and Outs The XENYX 1002 has two XENYX mic preamps with +48 V phantom power, making it possible to use two dynamic or condenser microphones
The three-band British EQ ensures warm, musical sound
Simple controls with rich musicality make it possible to create beautiful mixes with minimal technical expertise
Play music between sets via the RCA CD/tape inputs (assignable to main mix or control room/phones outputs) and record your performance to an outboard recording device via the RCA outputs
FX Send Add some outboard digital magic to your sound using the FX SEND
Simply connect an outboard device to apply effects such as reverb or delay
So Very Portable Weighing in at just 2.3 pounds (1.05 kg), the XENYX 1002 is the portable, practical way to turn a small performance with two vocalists into an arresting sonic spectacle
Value Lending optimum sound quality to small-scale performances has never been this easy or affordable
The XENYX 1002 provides incredible versatility at a price other mixers in this class simply cannot touch
XENYX 1002 Features Premium ultra low-noise, high headroom analog mixer 2 state-of-the-art XENYX Mic Preamps comparable to stand-alone boutique preamps Neo-classic "British" 3-band EQs for warm and musical sound 1 post fader FX send per channel for external FX devices Main mix outputs plus separate control room, phones and stereo CD/tape outputs CD/tape inputs assignable to main mix or control room/phones outputs FX to control room function helps to monitor effect signal via headphones and control room outputs Long-wearing 60-mm logarithmic-taper master fader and sealed rotary controls High-quality components and exceptionally rugged construction ensure long life What's in the Box Behringer XENYX 1002 Mixer, Power Supply, User's Manual, Quick Start Guide
Save on
Pinterest
