I had a hard time fitting 2 140mm fans in the top much less a radiator

you may not be able to fit a 2nd fan on 240/280mm radiators up top

Also note, you don’t get the cool view of top fans when using a top-mounted radiator (unless you figure out how to put the fans in pull mode).Overall, an excellent case that is well worth the price

Folks might have trouble with top radiators depending on their motherboards

Good cable management, excellent radiator support, and all around great case to show off your build

Lots of space, easy cable management, have a Corsair CL watercooler (120i hydroseries?

Amazing case, easy to work with, superb space and clean cable management.

and I really appreciated the included cable management that the case has built in

It is definitely worth it to spend a little more and get the 570X as opposed to the slightly smaller 460X- granted, you'll need to have some cable management chops because the 570X has tempered glass on the backside, and depending on how you place the machine you will likely be able to see the sometimes ugly mess that poor cable management on the backside of a PC can create

Overall if you want a case with great cable management, air flow and rgb all in

Its very nice looking as long as you don't look at the right hand side of the case

Great looking case with very nice features and great build quality

Great looking case, will be heavy once you put your rig together.

It wasn’t the easiest case to work on, but it’s the best looking.

A cool looking case, nice updated look than my last Antec case (which is still a solid case).Came with good packing material, no issues with the shipping

Space to work in, now comes w/ shroud cover, sexy, well built, ect ect

Very well built and presented,with all additional hardware included

Great looking case with very nice features and great build quality

Anyhow, Pros , stunning case (especially compared to the nonsense cases over the last 10 years ) very well built

Beautiful case, only my 2nd build didnt have many issues

Cable managment was a bit of a pain but other than that great tower i like the removable screens which make it easy to clean as well as the rgb fans.

(one of the issues Corsair has corrected already)While the tower is super easy to build in, and gorgeous to look at, it does have its issues, Cable managing this thing can be frustrating

I bought two of these bad boys to replace the towers we were using (The Manta ITX and the S340)These are gorgeous towers that I do not regret despite some of the issues I have with

(one of the issues Corsair has corrected already)While the tower is super easy to build in, and gorgeous to look at, it does have its issues, Cable managing this thing can be frustrating

You can't go wrong with purchasing this tower

The build quality is excellent, good airflow, and the inside is spacious for being mid tower

The front/top glass may impede airflow to some extent and I haven't tested this case enough to know what the airflow is like inside the case

Good airflow, beautiful design, spacious (for a mid tower), dust filters, Corsair's amazing customer service!Cons

The front/top glass may impede airflow to some extent and I haven't tested this case enough to know what the airflow is like inside the case

That said, with a few tasteful LED strips and better fans, the case looks wonderful and maintains very good airflow for my 8700k and 1080ti hybrid build

Good space for cable managment, Full tempered glass, magnetic dust filter, enough space for custom loops, look absolutely beautiful

This is an excellent case, it looks amazing and has good space.

Just bloody look at it, internal space for days,Con, if you can call it that, no drive ports

Amazing case, easy to work with, superb space and clean cable management.

I don't use liquid cooling but it can fit any size radiators and has enough space for pretty much any pump you could throw at it

Overall if you want a case with great cable management, air flow and rgb all in

Good cable management, excellent radiator support, and all around great case to show off your build

It boasts tinted tempered glass panels on four sides of the case, 3 RGB fans, white led lit logos on the front of the case and on the PSU shroud, and last but not least; great cable management

One thing I really liked about the case is the openness of the top, from the left to the right side of the case the entire top is wide open, making it easy to sneak some cables through there for hidden clean routing.

Amazing case, easy to work with, superb space and clean cable management.

My one main gripe is I do not like the SP fans that come with it

Well i was not able to find an SP140 RGB fan only static color SP140 fans

The case comes with SP120 fans with and SP fan controller and the top able to take two 140mm fans

I have equal intake and exhaust fans, but I still have a negative pressure going on since I can feel air being sucked in around the glass

When I purchased this case at the time I, and most likely a few others, didn't know there is SP and HD LED fans which are different

It is a crystal beautiful case with great cooling design

The thumbscrew design with tempered glass panels is a headache and leads to tons of finger prints all over the panels any time you need to work on anything

The drive caddies are just bad, easily fixed, but a very bad design.

Good airflow, beautiful design, spacious (for a mid tower), dust filters, Corsair's amazing customer service!Cons

Design is great, detachable mesh screens (top and front, with a small one under the PSU) with magnets to lock tightly with the frame, good filtering and easy cleaning.

The only con is that I wish it came with a cover to hide the side of the psu shroud.

Nowhere to route the cables through the PSU shroud from the bottom motherboard headers

The only issue I have found is with the PSU shroud, it is open on one end and there are no cutouts leading to the bottom of the motherboard.

Also, there should be a channel in the PSU shroud to hide wiring across the bottom of the motherboard

I think the biggest disappointment is the open side on the PSU shroud

An idea would for corsair would be to make it a few inches wider and have a gap between the metal that the motherboard connect to and the metal that the hard drives, fan controllers, and other accessories connect to

There are two HDD bays (tool-less), and two SSD bays (tool-less), so don't expect to be able to put 6 hard drives and an SSD in here

I broke 2 wires trying to fit the hard drive in the space that was given, and wound up putting it on the front side of the case

I especially love how the Hard drives mounts are on the back side of the mobo tray

I have no complaints other than it needing more space where the hard drive goes.

This is especially true considering that the power supply shroud has holes that seem like they should be for mounting a cover

Front power supply shroud was already installed on my case

There is also an added rubber grommet on the top of the power supply shroud

In reviews, people were complaining about the power supply shroud being open and the cords being visible through