Good build quality, wished the casing was of slightly thicker gauge.
was having problems with my guitar signal, using pedals,ac adapters, worked like a charm, the space between outlets isnt great so you may only find that 3 or 4 are usable at a time depending on what yer plugging in (ex. wall warts) but its built solid and priced right.
was having problems with my guitar signal, using pedals,ac adapters, worked like a charm, the space between outlets isnt great so you may only find that 3 or 4 are usable at a time depending on what yer plugging in (ex. wall warts) but its built solid and priced right.
Sturdy and well built, metal case with a long and thick gauge chord
Gone is the myriad of adapters people brought in trying to burn the building down.
if you are a dj or musician and drop it or rough hande it, the internal wiring to the sockets are only pressed in spring loaded, not screwed in or soldered, they will fall out or make a weak connection, internally cheap construction
Heavy, solid, metal construction with a long cord that reaches well into the stages we play on.
Solid construction - I use these in my workshop as well due to the tough chassis design3
When you can get it under $30 it is an amazing product, nice long cable and sturdy construction
This power strip has a great cord length, and is solid strong construction
The results I get are great, no difference with the more expensive Furman M-8X2 Merit Series 8 Outlet Power (especially when it comes to noise reduction)
I have several Furman rack unit power conditioners and like the Furman brand.
I also recommend the Furman M-8Dx power conditioner for a home theater.
You can buy a decent Furman Power Conditioner and have that connected to the main outlet in your
Will probably return and get a more expensive furman power conditioner to see it can address the EMI/RFI better than this box.
This is a high quality power strip with solid outlets and a very long cord
One other feature relating to the weight which is kind of weird is that when people use the cheap drug store plug strips, there is always a chance that the cords attached to it will lift it off the ground making a tripping hazard as well as an unsightly messy cord situation
Another EZPZ fix if you find a GOOD cold-weather 12/2 cord (I did) to replace the original
Quality construction, surge protection and a nice long cord.
Solid Furman quality with xtra long flexible power cord.
Nice build quality and nice long cable firmly attached to metal box
Super long cable to hit the just out-of reach outlets at many venues.
When you can get it under $30 it is an amazing product, nice long cable and sturdy construction
It provided a lengthy cable to easily make it to those normally out of reach corners, was built SOLID and offered plenty of outlets for multiple electronics to be plugged in
Highly recommend and the extra long cable can be really useful
Power strip seems good, but for $35 I’d expect heavier gauge metal, and the plug receptacles themselves sink into the chassis of the plug contacts are tight ...feels like cheap plastic plug receptacles.3
No published specifications on clamping voltage (for any leads, L-N-G), no published specs on total Jules of surge protection, no master off feature, no info whether it cuts power after surge protection is over
Someone told me once: Buy the best surge protector as you can afford.
my other cheap plastic power strip i bought at walmart would not sit flat on the floor ,ordered this Furman surge protector had it for a few weeks ,works as advertised
Glorified power strip, looks great nice long cord, does nothing for 60 cycle hum or dirty power, if you want a cooler looking power strip with a long cord here you go.
I also recommend the Furman M-8Dx power conditioner for a home theater.
Helps cut down on 60 cycle hum and ground loops.
No published specifications on clamping voltage (for any leads, L-N-G), no published specs on total Jules of surge protection, no master off feature, no info whether it cuts power after surge protection is over
The filter helps kill seemingly ubiquitous 60 cycle hum (and the classic rock FM station interference my Fender Rhodes piano likes to pick up and amplify), and is especially helpful when playing club gigs in bars with flashing neon signs, dirty power, etc.
You are reading snippets from reviews of Furman SS6B 6 Plug Surge Protector
eliminated the nasty noise from my peddle board and powered PA studio speakers
Purchased one for a family member who lives in rural area where the power fluctuates and this is used to protect her electronics and clean up any signal noise from electric current actually seems to give a moderate boost to performance to equipment.
Also, some reviews say that this has gotten rid of humming noise.
Does not fully eliminate him noise but protects you’re gear!
Does kill some noise by comparison to the house plastic units most use.
Have four, and have made 5 friends happy by solving buzz, hum problems in their high end gear.
Thank you for making a fine product for a reasonable price that really addresses the hum problem.
The problem with RF (Radio Frequency) interference (severe AM radio buzz) started when I replaced the power supply and graphics card in my HP Pavilion desktop
A very cheap solution to what could be an expensive problem for some.
I also recommend the Furman M-8Dx power conditioner for a home theater.
These are made of excellent quality, and they get rid of ground loop hum.
No published specifications on clamping voltage (for any leads, L-N-G), no published specs on total Jules of surge protection, no master off feature, no info whether it cuts power after surge protection is over
Get a few of these and daisy chain them together and voila, plenty of conditioned power without worrying about a ground loop (ground loops introduce hum into your system)
This got rid of ground loop noise that was being transferred from my desktop Mac to my studio monitors
I had tried the Hum DeBugger from ElectroHarmonix, the Ebtech Hum X Ground Loop Eliminator, new cables, old cables, etc to no avail.
You are reading snippets from reviews of Furman SS6B 6 Plug Surge Protector
The advertised "EMI/RFI Noise attenuation" doesn't seem to be doing much of anything either
I've utilized Furman power conditioners over the years and this surge protector does a great job at EMI/RFI noise attenuation as well as protecting your equipment.
I also recommend the Furman M-8Dx power conditioner for a home theater.
I wish I could give this a better review, but the EMI/RFI noise attenuation did very little to address the noisy power in my apartment
If you're thinking about buying this because of the EMI/RFI noise attenuation, then I'd advice you not to buy it and seek other allternatives, as you'll be wasting your money with this one.
You are reading snippets from reviews of Furman SS6B 6 Plug Surge Protector