So far so good, nice assortment of bits, very happy with them.

This is a nice assortment and it allowed me to redo the peg boards in my shop so that they look much better and are sturdier and stronger.

Great assortment but could not use for generic pine/common lumber

Just taking one star off 'cause the assortment could be better with a couple more of flush trim bits.

For the price you get a very nice assortment of what appear to be decent quality bits

Great little set of router bits, they work great and at a good price .

Great Price , Very sharp and lasting, used 3 sofar, and they work very well

These bits work great and the price is not too steep.

Great Price , Very sharp and lasting, used 3 sofar, and they work very well

Hard to believe you could get 24 router bits for such a great price

Very cheap product and is for a

Will update my review in the future if anything changes, but for now I recommend this product.

Bought this product for a wood project and worked great

Works as expected, quality product with lightning fast shipping.

and you don’t have to guess what your final product will look like

For the price it is an excellent value for "once in awhile" use.

A great value for those needing to use routers on a limited basis.

A real value 15 router bits cheaper than two bits in another brand

If that is what you are doing, then I think they are a good value

This was an awesome deal, i am a brand new diy woodworking novice, i made my first hardwood butcher block and wanted to add a juice groove and edge, i dont have a lot of money and this product was the best value, a variety of bits with a picture of what each bit does for a novice like me thats great

But hey, they're sufficient for a cheap starter set.

Inexpensive starter bits who's just starting to get into woodworking

I was going to rate them 4 stars, because they aren't anywhere near as good as my Freud bits that I have, but I am a beginner woodworker and these are a great starter set of bits to get me used to using my router and give me versatility while being affordable.

So fine as a nice little starter set, but make sure you have a backup if you're using the 1/4" or smaller bits.

Good starter set, bits are limited, but with care they will last quite a while.

Not a bad deal, did a great job on soft wood

The bit are still as sharp as they were when I first got them

You can't beat the price on these and you will not find a better deal anywhere else

This was an awesome deal, i am a brand new diy woodworking novice, i made my first hardwood butcher block and wanted to add a juice groove and edge, i dont have a lot of money and this product was the best value, a variety of bits with a picture of what each bit does for a novice like me thats great

for a first time purchase of this type of product I feel that I got a good deal and they weem to be well made.

No problem with that AND indeed much better for fine work.

I've only used about 1/3 of the bits so far, but they do great work!

The larger bits work fine, but the 1/4" bit snapped on me after about 15 minutes.

I broke the smaller bits, but the rest work pretty good.

I would categorize these as being for small woodworking or fine work as the bits are about 1/2 the size of my "furniture size" bits

These are surprisingly good items considering they are made in china from a mostly unheard of brand

These aren’t exactly the best quality items if you are looking to use them often

FAST SHIP-FINISHED MY PROJECT ON TIME--SEEMS TO BE OF REASONABLE QUALITY--GREAT HOME OWNER ITEM- AFFORDABLE- YOU WILL NOT BE SORRY TO

This item was recommended by many people on several YouTube

card to may account in couple hours after scan of defective item in UPS.Now

If you're looking for some good quality bits, you found 'em.

Great set and great quality for the price, I bought this for my

Looks like the router bits are OK quality but they shipped them inside the router case and the heavy weight of the tools have broken up the inside case wood mounts for the bits

The quality of the steel on certain bits may be questionable

Poor quality metal, 2 bits snapped off under light load

The box is nice, but unfinished and would get dirty quickly, so I added a few coats of polyurethane and now have a box that will stay nice for a lifetime

The bits arrived promptly in a very nice wooden box with a latch

They come in a nice storage box that will keep them together.

I've seen these router bits run $15-30 a piece so who cares about the crappy box!?!?!?

The box was damaged and one bit was crooked but all in all my husband liked them and was satisfied with them to do jobs around the house

The bit to cut a flush edge barely cut soft poplar wood and it burnt the entire cut in the process as it struggled

Was using the 1/8 inch straight cut but on some pine boards, and it broke in half on my third pass.

chamfer bit in rock maple with great ease and good smooth cuts

I never used a router before, and needed to clean up rough cut edges

Not sure if it the fact Im using this set in a B&D Matix router attachment, or because the bits just aren't that good, but the cuts and edges I get are rough, and sloppy

The bits themselves are decent for being such a low cost set

They are cheap bits, I pushed the straight bit 1/8 a little too hard.

I broke the smaller bits, but the rest work pretty good.

Good starter set, bits are limited, but with care they will last quite a while.

1/8” straight bit broke off just few seconds later in its first use..other bits

Wow first time using the straight bit and the bit breaks

Used 1/4 straight bit three times and it broke, one day after the return window for Amazon closed.

I have used these a few times over the past couple of weeks and they work great

My husband has a hard time keeping up with the small things in his shop!

Have only had occasion to use one of the bits but carbide is supposed to be longer lasting, right?The one time i used was free-

This set is junk, I used a bit for less then 5 mins and the bearing flew up and messed up the piece of wood I was working on

and the bearing doesn’t bind up like another set I

Decided to try out a 1/4" roundover bit on some maple with my trim router, but after about 4' the bearing came off and ruined the cutting board

The bit are still as sharp as they were when I first got them

The bearing fell to the ground, but the screw sounding like a bullet bouncing around my workshop.