The plastic vents on my truck are old & brittle, and this gripped so tight it actually broke the vent fins when I tried to remove it

The fins which hold it in the air vent could be sturdier, maybe my car's vents are just loose

The rubber feet that are supposed to grip the vent fins slid off and got swallowed in the car’s vent.

Grips phone and vent fins well.

You do need to be a bit careful to make sure you the rubber mounting fingers over one of the vent fins rather than between them

I mount it on the AC vent fins and find it to rarely slips or needs resetting.

The push button grip for the vent fins is a huge upgrade from the old rubber mount.

The clip is designed to fit thin vent fins or turn it 90 deg to the larger slot for attaching to a thicker part of the dash

Fits the A/C vent fins wells

It has much less gripping power than the Airframe+, slips off the vent fins virtually every use and, this morning,

If the vent fins are not able to hold the weight of the phone, it will droop

This can be mitigated somewhat by mounting the unit to the bottom vent fin which can be stabilized by the lower vent border.

but that's not the fault of the clip, just a result of the added weight on the vent fins that the auto manufacturers didn't foresee.

I did have to learn to hold the phone and mount separately while engaging / disengaging and I am always concerned about breaking the fins in the air vent each time, but keeping the mount stabilized / secure will prevent any such damage.

Just gently removing the phone would remove the unit from the vent fins.

Flaps that grip the vent fins in the car keep breaking off at the base

The only problem is in a car that has vertical vent fins that sit back farther than the airframe+ can reach

Phone easily slips in and out and the clip stays on the vent fin.

Simply rotate from behind to choose the right size of car a/c vent fin

I mounted this unit on my F-350 Super Duty which rides like a tank and the mount has yet to fall off

The one I had worked, but it was bright white against my black vents, and it sometimes fell out of the vent as I fumbled with it to get my phone in and out