This is a very flexible air vent mount that can be mounted at any angle, and the built in air vent mounts allow for installation on either narrow or broad vanes.

Too small to fit my phone and doesn't stick out far enough from air vent to be able to swivel all the way up and down.

I take this when I travel and it fits easily and securely into the air-vents.

I bought my first Kenu air vent holder for my iPhone 5s and loved it

If the air vent you intend to use is more than three inches wide, probably no problem

The air vent was turned off, so it wasn't due to heat/cold messing with the glue

It holds my iPhone 6 Plus perfectly without closing the air vents

This mount works best when vertically mounted on a curved air vent such that the bottom of the device in the holder is supported by the lower vanes on the air vent.

Easy to mount onto air vent

When I get back into my car, I have to insert my phone back into the Kenu Airframe+ with both hands and put it back into the air vents

Always stays in place on the air vent!

The Kenu Airframe+ vent mount on the back has a simple option for thick or thin air vents and fits perfectly into the vents on my 2017 Kia Sportage

It sits nicely in my air vent and holds my phone securely

Fits my BMW air vent perfectly so Waze is always there to alert of an officer!

However, after four months the clamp that grips the car air vent has subtly loosened to the point that whenever a phone is inserted, the Airframe+ inevitably keeps falling off, rendering it useless.

Otherwise, will block 3/4 of an air vent.

Simple, cheap, effective, doesn't hur the air vents.

Maybe, they could make one with a rear plate built with a frame that could redirect air through air vents around the phone

This product worked great in a rental car but unfortunately the air vents in my car don't work with it

Compact and easy to "install" (if you can call pushing the tab into the air vent installation)!

The best cellphone air vent mount I've found

This is a great product, it holds the phone and never fall's out, it even has two diffrent size slits for different air vents, I travel for work and this is by far the best phone holder I have

The problem is that I prefer not to drop this rubber piece into my air vent system of my brand new car and have now completely stopped using it because of it

It holds the phone pretty securely when done correctly and even after hitting some hard bumps at speed the phone did not slip out and the Airframe did not fall from the air vent

The air vents on the 2017 Chevy Volt really don't work well with this product

Fits my phone (5c in case) fine but does not stay in my air vents.

Two of the rubber tabs (that cover the prongs which hold the phone in place) fell off into the air vent the first week I used it

I do need to be careful not to mount it on the side of the air vent closest to my hazard lights button as I have inadvertently turned on my hazards when inserting or removing the phone from the mount.

it really requires a wide air vent to work well

(the phone hits the walls of the air vent before the bracket is fully pushed in)

A coworker that travels weekly for his job recommended the Kenu after my air vent holder self-destructed.

Pretty sturdy, but since it's it attached to an air vent, it can cause the phone to overheat so you will have to be careful

The Kenu airframe holder stays in my air vent.

The clams that hook the mount into my air vents were bent open and wouldn't shut completely

That said, it pops out of my air vent quite easily, which is annoying, and it doesn't hold my husband's larger phone.

The air vents are also scratched up as others have complained about.

Just stick it in the air vent and off you go.

I use it on my left most air vent

This fit perfectly in my cars air vent and my iPhone 6s is held snug.

The glue that holds the mount to the air vent grips no longer sticks, making the phone probe to spinning and falling

This device is easy to add/remove from the air vent, but it does not expand enough to hold my phone.

and you lose an air vent - currently looking at some other options.

The only issue it had was that it blocked my entire air vent, but this is a very minor one

Works as expected, easily attached to my air vent, holds the phone firmly

I have this, and it doesn't stay in the air vents-it keeps falling.

If you car air vents are secure and stable, this thing is amazing

It fits easily and snugly onto my air vent and doesn't move around

Clips into my air vent very easily and does not move around or shake.

It does block one of the air vents though so you won't get the full effect of your cars a/c or heat coming through the vent.

What I really appreciate is that the mount's snug front prongs allows me to slide the phone into place without worry that it will separate from the air vent

The surface around my air vent has a matte finish and the kenu air frame rubs against it while driving

The clip on the air vent is also snug enough to withstand the traction placed on it when sliding the phone in with one hand and does not come detached from the vent or even really slide loose from the vent

Rarely falls out of the air vents in my car (which the smaller version did) and fit both an iPhone 6S+ and a Galaxy S7.

However, the air vent that I stuck this to in my older car broke from using it in only a few days.

My only warnings are to make sure that your air vents aren't recessed deeper than the mount can reach (check the product dimensions) because if your vehicle's vents are abnormally recessed, you could have an issue getting it to stay in the mount

Does not actually hang to the air vent

Never falls out of air vent

The mount wouldn't stay hooked into the air vents so the product became useless.

Fits most air vents

and it adapts well to different styles of air vent

This mount works very well with the Nexus 6P, though the phone and/or my car's air vent might be too loose

After about 8 months of use, the plastic piece in the back that grips the air vent completely broke without any manuevering (phone and car mount fell off while driving)

I have an older car and the air vents are very loose, in that, the wind could potentially move them

However, after maybe a month or two of very sporadic use, one of the small rubberized 'feet' on the clamp portion (where it holds to the air vent) came loose

However, the rubber grips that secure the frame to the air vents in the car have fallen off

Using the air vent is the perfect spot for the phone in my car.

Also this holder works well with the vertical slats in the air vent in my Infiniti G37.

It slides into and out of the air vent with ease, yet doesn’t fall out during driving

The only weak spot may be the air vent or thing you connect it to.

The fins which hold it in the air vent could be sturdier, maybe my car's vents are just loose

The spring action is firm and the rear prongs that slide over the air vents are also firm with a very tight fit and stay in place

the rubber portion that i secured onto my air vents wore down within 3 weeks and the hard material underneath caused damage to the vent in my vehicle

If you car air vents are secure and stable, this thing is amazing

and I had her try to put it into my car, and she immediately broke the louvers in my air vent

The only annoying thing is that it makes it difficult to adjust the air vent that you attach it to

2 months in it started to fall of my air vent

Grips on to fins of air vents so can be moved to where it's convenient

I have a 2015 Toyota Tacoma and an iPhone 6, and the air vent naturally-positioned for mounting is narrow, so the plastic mounting bracket cannot get much

I like how small it is but it doesn't clip to my air vent well

The air vents on the 2017 Chevy Volt really don't work well with this product

After a few months , the clip that hooks on to the air vent broke, I placed the cell phone holder in the a/c vent never touch it again, and yesterday just fell off, to find out the clip broke off

After about six months, though, the grip on the air vent began to weaken, and it would regularly slip off

They hold the phones snugly in your cars air vent (make sure you have fin air vents) and allow one hand insertion/removal

The only problem I have is with the angle of my air vents

The location of my air vents on my car make for not the most optimum location and position

Caught my phone thankfully but the holder dislodged from the air vent and fell to the floor but luckily did not get in the way of me using the gas/break pedals.

I saw this Kenu mount in someone else's car months ago and loved the smaller, sturdier look and the black/grey colors that blended in with the black air vents

I would use the buttons to position the mount on the air vent

Disappointed, looking at replacements with tightening piece on air vent

It's easy to get your phone into and will fit any air vent

It really holds the phone down firmly, and also grabs onto the air vent strongly.

It does not fit snugly on the air vents in my car and does not hold it's position vertically or horizontally.

It didn't stay secure in my air vents until I used wire twists to hold it

plastic pieces from the inside fell out and it no longer hooker to the air vent

I don't mind leaving it in my air vents without a phone, it looks that good

it really requires a wide air vent to work well

Having it mounted on the air vent is much safer as I don't have to look down all the time to see what route it recommends

and I wish the rotation had a few more clicks (my air vents are angled in my FocusST) but would definitely recommend for people whose windshields are too far away from them to use a suction mount and who don't want to potentially damage their dashboard.

I have to remove the Kenu Airframe+ from the air vent, then pull back on the spring with both hands to remove my phone

Very sturdy in terms of construction and in terms of staying in place on the air vent.

Fits any style of air vent and will rotate to keep the phone correctly oriented.

If it attaches to your air vent this is a great option

It grips pretty firmly to the air vent and can go on either vent

This is perfect for my iPhone 6SPlus in my old Ford Focus which has curved air vents.

The other problem and the main reason it got two stars was that unless you are super super careful, it's easy to break the air vents in your car

Really holds to the air vent and securely hold your phone

I'll close the air vents if the car design allows it.

After enough badgering I bought one of these to stick on the air vent

The best cellphone air vent mount I've found

I like the part that grips the air vent, you can press on it to open the "grips" a little to fit thicker vents

it falls out of the air vent when long ways

It's only fallen off my air vent once when I had to make a sudden stop

However, I am disappointed that I've noticed that the air vent slats have become damaged

It fits securely in my air vents and holds the phone firmly in place for easy viewing and use.

When it was working, it would fall off of the air vent every couple days.

I tried this on my car and my son's car (two different makes) and the phone pitches foward no matter how we attach it to air vent

Highly recommend if you have solid air vents

Simple, cheap, effective, doesn't hur the air vents.

This kept falling off the air vent!

Easily clips into an air vent and my phone clips right in

Worked well with my iPhone 8 plus for 3 months, but it no longer grips the air vent in my car and is now completely useless

These are hands down the best phone holders that clip into your air vent of your car

The plastic that fits inside the air vent is not a quality material and gave in to nothing other than minimal use

Slightly blocks the air vent but otherwise its a great solution that has worked well for months for me.

Fits on perfect and stays mounted on the air vent every time

like while it was working is the fact that it clips to the air vent, which means it blocks the air.

and it's very easy to mount and dismount on the air vents

Amazing and holds excellently, but one suggestion: for the air vents that have a known that sticks out in the middle to push the air direction left or right, this hits that and causes the phone to go in an uneven direction

After a couple months the gripper part for the air vents loosened enough that it came off every time I tried to remove my phone.

This should have been designed so the the clip is positioned at least 1 1/2 inches from the actual air vent

I bought this for my LG Stylo 2 (3.13 inches wide) after I trimmed the grabber pads down a bit it holds great, holds the air vent well, but the vents in my car are set in a way that part of the phone (therefor navigation) is blocked by my steering wheel

This is a very flexible air vent mount that can be mounted at any angle, and the built in air vent mounts allow for installation on either narrow or broad vanes.

I can remove my iPhone with one hand and the clip sticks to the air vent.

Also, I got one for my dad but his air vents were not thick enough to support it.

I've also used it in a 2011 Subaru Forester, the central air vents are lower on the dash and the mount isn't as flush there and sags under the weight of the phone, which angles the phone downward.

Over time, I can see where this repeated removing and inserting the mount into the air vents will either damage my vents or the Kenu Airframe+ rubber mounts on the back

The Airframe pushes onto my car air vent after I attach the phone by sliding the arm outwards and placing the phone inside, then releasing the arm to close onto the phone

It holds ok, but very difficult to get phone out without pulling it off the air vent.

But putting my Samsung Galaxy S6 into the mount would invariably cause it to dislodge slightly from the air vent

It doesn't damage the air vents in my mom's 2010 Ford Escape in any way.

Never falls off the air vent and my phone, even without a case, never slips down in the grasp of this mount

Turns out this works great with iPhone X. Easily slides snugly on to the air vent

Fits firmly on the air vent and holds my iPhone 6 Plus securely in place.

Doesn't stay on my air vent.

Plus, sitting on your air vent, you're not blocking your windshield with your phone when using it for a GPS.

If you want to save a few bucks and if your car has horizontal air vents you can check out the Leeioo Mobile Phone Car Holder which is 1/3 the price and is easy to swivel the phone and also easy to release the phone.

grips the phone securely and grips the air vent securely as well

I do lose about 1/2 of an air vent but with my phone in place, I can find a destination using Google Maps - priceless!

Upon inspection, I saw that the feet that clamp onto the air vents were loose and bent out of position

Damages the Air Vent & blocks the air when phone is placed :(

It has much sturdier construction than a lot of air vent mounts, and the "spring" action of the clip allows him to use different sized phones.

It blocks only half of the air vent on my Honda Fit, and even then, my phone gets cool air blowing on the back of it to counteract the Central Texas heat and sun

Doesn't stay in the air vent after a while

Unfortunately after less than 3 months of sitting in my air vent it died on me

I did have to learn to hold the phone and mount separately while engaging / disengaging and I am always concerned about breaking the fins in the air vent each time, but keeping the mount stabilized / secure will prevent any such damage.

I have the original and it did not reach out far enough from the air vents on my new car.

The legs are sturdy and hold on well to the air vent

Hint: close your air vents if you don't want hot or cold air blowing at your phone

Easily clips to the air vent, and widens to take iphone 6s and samsung galaxy S5.

The prongs on the back have stretched and no longer securely attach to the air vents

Problem with putting mount in air vents because in my car (Subaru Outback) the emergency light button is near the

grips the phone securely and grips the air vent securely as well

The part that attaches to your air vent could be a little stiffer

The only thing I'd consider is whether your air vents are located in a good spot so that you can see your phone while driving

Fingers too stiff to spread to to hold in weaker air vents.

The concept is great, HOWEVER, please check the construction of the air vents in your specific car before purchasing.

but it's got some kind of coating/protective layer that makes it seem like it goes onto and off the air vent very smoothly

The first is this is made out of very flexible rubber, and even with the phone mounted flush to the air vent, it wiggles a little in the mount when you're driving

The airflow on my air vents can be closed off; so I've just closed off the airflow of that particular vent so as not to overheat my cell phone with heat blasting out of the vent.

I really like the idea of this car mount and my husband swears by his, but I find that the prongs are a bit too big for my air vents

The device attaches to the air vent securely and had no issues supporting my large phones (Nexus 6P and iPhone 6S).

The air-vents are small and a little recessed

You have to stretch out the arm and then put the phone in and then put the back clip onto the air vent

I drive a 2015 Tesla Model S and because of the design of the air vents and where they are on the dash, this smart phone mount just doesn't work at all

blocks my air vent when my phone is in it

Easily attaches to my air vent and it is stable and adjustable

It doesn't damage the air vents in my mom's 2010 Ford Escape in any way.

This was working great for a few months holding my iPhone 8 Plus on the air vent of my Ford F-150

Fits well into the air vent, stays in place, incredibly simply installed; holds the phone very snug.

The White color stands out well from most cars black air vents so you don't overlook it and leave it in a rental car when you return it.

Works great and has good grip for holding phone and connecting to air vent.

Grips my note 4 with no issues, hold tightly on the air vent

When I first attached it to my car's air vent, I thought, THIS is supposed to stay attached to the vent and hold my phone?!?

SHOCKING as it may seem, I was notified that my airframe was not a genuine Kenu product

Works as I expected.

The one I had worked, but it was bright white against my black vents, and it sometimes fell out of the vent as I fumbled with it to get my phone in and out

My XC60 R doesn’t work well with this unit.

My XC60 R doesn’t work well with this unit.