• Reviews around bite (2.29 of 5)

    Macally Car Cup Holder Phone Mount with a Flexible Extra Long 8" Neck for iPhone XS XS MAX XR X 8 8+ 7 7 Plus 6 6+ 5s SE,, Samsung S9 S9 Plus S8, Motorola Moto, Google Pixel XL 3 (MCUP2XL)

    • It seems to wobble quite a bit from the base which made it hard to press buttons without cradling the phone
    • I have had it for a good bit of time
    • The mCup can vibrate a bit at times, but overall it works well for me
    • However, I noticed my iphone 6 has a bit of weight on the charging end so the phone will sag a bit in that direction once secured into the holder
    • It was a bit tricky to get it secured in the cup holder.
    • A little bit difficult to "release" al the cup to fit onto my holder, but at the end works as expected.
    • It is a bit tricky to have a good grasp of my iPhone X with its cover, as it is slippery, but after a couple of attempts, now it's second nature
    • but it is still a bit loose.
    • The 8-inch neck is very stiff, a bit hard to bend but results in a stable platform
    • Even better if the manufacturer works a bit on the part that tightens and releases the cup section, just to make it a bit more durable
    • A little bit difficult to "release" al the cup to fit onto my holder, but at the end works as expected.
    • The neck is a bit stiff and it is a bit difficult to move around once it is set, so if you think you might need to adjust the angle of your phone often, this might not work well.
    • The neck of the holder is a bit TOUGH to adjust.
    • However, I noticed my iphone 6 has a bit of weight on the charging end so the phone will sag a bit in that direction once secured into the holder
    • Two things I would like to see though, some ability to not hold the phone so tightly and to have a little bit longer flexible neck.
    • Kept falling out of my cup holder a bit
    • I would have to say that it actually makes it a little bit safer as well.
    • The mCup can vibrate a bit at times, but overall it works well for me
    • Upon tightening the unit into my cupholder it seems to hit a point and then clicks, this makes it become a bit loose.
    • It would be nice if it was a bit longer or a bit more flexible.
    • As a result of the poor mounting bit, as you start driving, whenever you stop or begin to accelerate again, the mount slowly pulls itself out of the cup holder and throws your phone everywhere, which is the opposite of how this should function
    • At first try, it was a bit too loose in my cup holder.
    • The neck is a bit stiff and it is a bit difficult to move around once it is set, so if you think you might need to adjust the angle of your phone often, this might not work well.
    • It does wobble a little bit due to the height but hasn't been an issue
    • I wish it were a bit more stable
    • I felt it could have been a bit more flexible, and due to the shallow depth of the cup holder, I knocked it out of the holder a time or two.
    • I liked the design quite a bit, fit
    • Disappointing -- I'll be looking for a replacement soon.