If you dont mind the weight, this does the job and sound dampening really well.

It is easy to use and does a great job of sound deadening

I used this along with the Noico foam and it did a great job reducing sound on an old VW bus.

This stuff sticks like mad and does a good job changing resonance through mass as advertised

It is a good amount of work to strip the interior but the results are worth it

Excellent quality great price would recommend to anyone not as thick as the dei boom mat but wayyyy cheaper

PROS: nice size sheets, easy to handle, easy to cut, excellent price,CONS:

Noico sound deadening meet my expectations at a great price

PROS: nice size sheets, easy to handle, easy to cut, excellent price,CONS:

Generally very pleased, excellent value, appreciate that it's a dark color that doesn't require painting.

Great value... works just as well as the higher priced sound dampeners.

From there, I simply worked around the trunk, knocking on the sheet metal as I went and placing material where it was needed

Backing comes off very easily, the sticky side is sticky enough to hold sheet in place by the edge or corner and so long as it's not pressed firmly, also easy to unstick and re-position

By far the best value and it is amazing what it does for your interior comfort

I would recommend the wheel, I could see it being difficult to get proper adhesion without it

Has the same heavy mass feeling, good adhesion, and blends in to the background.

From there, I simply worked around the trunk, knocking on the sheet metal as I went and placing material where it was needed

Backing comes off very easily, the sticky side is sticky enough to hold sheet in place by the edge or corner and so long as it's not pressed firmly, also easy to unstick and re-position

Then once pressed using a roller, this stuff ain't going nowhere (again simple hair drier works wonders for totally softening the material and ensuring proper adhesion)

This gets the job done and then some, I did my entire 2017 WRX (doors, trunk) and my doors have a nice thunk and weight to them, really makes a difference on the inside to reduce road noise and improve sound

Sorry, I won't know how well it actually damps sound for many months.

I'm only seeing about a 2dB drop in sound, but the sound that is coming through is much less annoying, which is a little weird to say

It's a well known fact that you should wear gloves while installing sound deadening like this

Just clean the surface, stick it on (peel paper off while sticking it down to avoid air bubbles), and roll it over

I even tried roughing up a surface and cleaning it with xylol/xylene.

From there, I simply worked around the trunk, knocking on the sheet metal as I went and placing material where it was needed

Backing comes off very easily, the sticky side is sticky enough to hold sheet in place by the edge or corner and so long as it's not pressed firmly, also easy to unstick and re-position

Material was easy to cut and the backing was easier to work with than some of the plastic backings on other products.

Foil is super thin, so thin that it's easy to tear and ruin the material, i'm not a professional sound guy, but i do design

From there, I simply worked around the trunk, knocking on the sheet metal as I went and placing material where it was needed

Goes on well but is easier to roll out on a warm day as the material gets softer

From there, I simply worked around the trunk, knocking on the sheet metal as I went and placing material where it was needed

Good adhesive; loved the black color, as it goes much better than the usual aluminum foil covered look where it is exposed.

From there, I simply worked around the trunk, knocking on the sheet metal as I went and placing material where it was needed

Great quality product, would suggest installing when it is cooler out, the warmer the adhesive gets the stickier it gets and it will smear if your not careful, also follow the directions and we're

The material doesn't smell, adhesive seems to be strong and it was easy to cut with a standard utility razor blade.

Backing comes off very easily, the sticky side is sticky enough to hold sheet in place by the edge or corner and so long as it's not pressed firmly, also easy to unstick and re-position

From there, I simply worked around the trunk, knocking on the sheet metal as I went and placing material where it was needed

Backing comes off very easily, the sticky side is sticky enough to hold sheet in place by the edge or corner and so long as it's not pressed firmly, also easy to unstick and re-position

Cheap and good quality.

Seems like decent quality but not as sticky as some others.

Great quality product, would suggest installing when it is cooler out, the warmer the adhesive gets the stickier it gets and it will smear if your not careful, also follow the directions and we're

I used a hard roller to get a proper installation and would recommend using a roller to anyone who is looking for "complete" adhesion

Very much recommend using one of those roller applicators when installing, as it will make for much faster and easier installation.

Backing comes off very easily, the sticky side is sticky enough to hold sheet in place by the edge or corner and so long as it's not pressed firmly, also easy to unstick and re-position

From there, I simply worked around the trunk, knocking on the sheet metal as I went and placing material where it was needed

From there, I simply worked around the trunk, knocking on the sheet metal as I went and placing material where it was needed

Backing comes off very easily, the sticky side is sticky enough to hold sheet in place by the edge or corner and so long as it's not pressed firmly, also easy to unstick and re-position

Although I don't think it is quite as effective as Dynamat or Roadkill, it is also not nearly as expensive

From there, I simply worked around the trunk, knocking on the sheet metal as I went and placing material where it was needed

The Dynamat was stiffer to work with and the Noico was more forgiving

From there, I simply worked around the trunk, knocking on the sheet metal as I went and placing material where it was needed

That was all that was needed to get rid of the smell and the road noise.

This gets the job done and then some, I did my entire 2017 WRX (doors, trunk) and my doors have a nice thunk and weight to them, really makes a difference on the inside to reduce road noise and improve sound

It does help the acoustics of high end sound systems and reduces road noise some

Did not quite down the road noise as much as I had hoped it would!

Backing comes off very easily, the sticky side is sticky enough to hold sheet in place by the edge or corner and so long as it's not pressed firmly, also easy to unstick and re-position