Radar Mount Mirror Wire Power Cord with Inline Fuse RJ11 - V... - 2024 report by Whydis
Radar Mount Mirror Wire Power Cord with Inline Fuse RJ11 - Valentine V1 Radar Detector
Radar Mount 3005201V: RJ11 Mirror Wire for Valentine V1 Hardwire your Radar Detector in minutes! Compatible with Valentine V1 Detectors. Inline micro-fuse protects your device. 10" Mesh-Loomed Power Cable. Sturdy 0.075" Quick-Insert prongs.Use a Rada...
Perfect fit and easy install on my C7 Corvette with a Blendmount and Valentine 1.
After installing I much prefer the higher and more out of the way look of the radar and this cord gives it a professional finish if you can get it to work.
- Black (this particular one fits inside the mirror covering, so the install is very clean).
You are reading snippets from reviews of Radar Mount Mirror Wire Power Cord with Inline Fuse RJ11 - Valentine V1 Radar Detector
Fits perfectly into factory plug for a easy clean installation.
Installed this in my 2014 nissan GTR to power my Valentine One radar detector, really made for a nice installation.
I searched the youtube videos to get the details for the particulars on installing my vehicle and that combined with the quality of the product made for a very easy installation
You are reading snippets from reviews of Radar Mount Mirror Wire Power Cord with Inline Fuse RJ11 - Valentine V1 Radar Detector
*just enough* length to connect to the V1 mounted on the visor-clip.
The 10" length, once it makes its way out of the mirror housing can then be restrictive on where you put your V1, and make sure there is not too much tension on the cable, otherwise the electrical connection may become compromised (for the cable, not the mirror.)
You are reading snippets from reviews of Radar Mount Mirror Wire Power Cord with Inline Fuse RJ11 - Valentine V1 Radar Detector
The problem is that the pins are too fat to fit into the molex connector, and too short to reach anything metal inside of the connector.
so one has to order the ones with the correct pins for your application
Would not power on my detector and the pins seem flimsy like others have stated would break or too loose so you get mediocre contacts causing intermittent issues; if you can get the thing to work.
The pins are really cheap and snap off incredibly easily--in the product image, they appear to be solid pins like you might find on the leads of a multimeter, but this isn't the case
The pins are very fragile and I did not want to push too hard, since I was afraid they would break, as I read this has happened to other people.
After checking into hard wiring my detector, and not wanting to risk breaking the overhead console I found this little item that solved the problem
On a BMW it's pretty easy to figure out, typically a brown wire on a BMW is ground, and green wires are 12V power on key position 1, and lavender wires (or light purple, whichever you prefer) are power on key position 2, and blue wires are power when engine is on
On the auto-dimming mirror, the blue wire is the ground and white wire is 12V.
You are reading snippets from reviews of Radar Mount Mirror Wire Power Cord with Inline Fuse RJ11 - Valentine V1 Radar Detector
More about Radar Mount Mirror Wire Power Cord with Inline Fuse RJ11 - Valentine V1 Radar Detector
Radar Mount 3005201V: RJ11 Mirror Wire for Valentine V1 Hardwire your Radar Detector in minutes! Compatible with Valentine V1 Detectors
Inline micro-fuse protects your device
10" Mesh-Loomed Power Cable
Sturdy 0.075" Quick-Insert prongs.Use a Radar Mount Mirror Wire power cord to quickly hardwire your Radar Detector to your car's powered rearview mirror in minutes! Fits all cars with powered rear view mirrors only (auto-dimming, compass, map lights)
Pair a MirrorWire cord with our MirrorMount for the ultimate factory-installed appearance, and superior detection range!