FLAWLESSLY!However, I did spend a fair amount of time making sure that the bolt slid perfectly smooth

I had no problem installing this to replace my dead bolt lock

So far the batter is holding up well after trimming the strike plate for smooth bolt throw.

Excellent dead bolt lock...

Things I like: the dead bolt moves well and sounds substantial.

and I had no problem removing my old dead bolt and replacing it with this one.

Key to perfect installation is having the dead bolt free from interference - with door closed, the dead bolt should extend and retract without rubbing on metal frame...

Grade 1 secure dead bolt

We replaced a plain Schlage dead bolt and still had issues with extending the bolt (depth and placement of the

Grade 1 secure dead bolt

Key to perfect installation is having the dead bolt free from interference - with door closed, the dead bolt should extend and retract without rubbing on metal frame...

pain in the ass to install, if you already have a dead bolt installed you will need a 1/4 and 1/2 inch wood chisel, hammer, number 2 fillips screw driver, level to install.

Excellent dead bolt lock...

I also use the Z wave option with this dead bolt

I installed because i needed a dead bolt on door

Seems like Schlage should be able to make a much quieter operating bolt

I think if you do it's because the strike plate is interfering with the dead bolt.

How well the dead bolt fits the opening in the frame and if you have it set to auto lock

Before I did this, the bolt was very hard to turn but now turns freely

Yale keyless dead bolt for two years.

How well the dead bolt fits the opening in the frame and if you have it set to auto lock

changed and required drilling even though we used the old dead bolt's hole, face plates are also different and required new holes for screws).

Bolt is as strong and secure as a regular deadbolt.

looks good and operates very wel,l. follow the instructions