Silver Shock Mount For Blue Yeti and Blue Snowball Mics Elim... - 2024 report by Whydis
Silver Shock Mount For Blue Yeti and Blue Snowball Mics Eliminates Noises From External Vibration
Although the Blue Yeti is a wonderful microphone, if left on its desktop stand it will pick up every noise from your desk. All your keyboard thumps and mouse movements are transmitted directly to the micorphone, and can ruin your recording. A shock...
Had it for 6 months and the arm snapped, but worked amazing till then, just ordered another one
I bought the arm for it that amazon recommended was commonly bought with it, and now my Yeti is hanging.
The only issue I had was the mount was not very tight in securing the mic, and also the attachment piece that connects to the flexible arm was not very tight
Does a fantastic job eliminating any motion noise when combined with a nice microphone arm.
Deducting a star for the same reason as the Blue Radius II: the adjustable arm is hand-tightened, and does not lock in a fixed 90-degree or 180 -degree position.
You are reading snippets from reviews of Silver Shock Mount For Blue Yeti and Blue Snowball Mics Eliminates Noises From External Vibration
At 16.00 this thing is a steal compared to Blue's shock mount and does a great job.
Does a fantastic job eliminating any motion noise when combined with a nice microphone arm.
Does a fantastic job eliminating any motion noise when combined with a nice microphone arm.
My only complaint is that it feels very cheap, but it does it's job well
totally happy with the shock mount does a pretty decent job keeping the vibrations out of the mic or down to a minimum my only complaint is the usb cord pushes against the metal plates of the shock mount but isnt too big of a problem i can live with it and im very happy about the mount works great with my blue
I immediately could tell the difference as I'm a pretty heavy handed typist and I tend to bump my desk a lot, but with the shock mount all of those artifacts were gone immediately and I didn't have to worry about post production.
Pros: holds up mic without sagging over time Isolates mic from annoying desk vibrations
Make contact with the Mic or shake the desk to hard and it falls out of place.
This is especially true if you are using a desk-mounted microphone "Boom Scissor" mount
I have a desk clipped mic stand for my Yeti and my desk is a fancy piece of particle board with particle board legs...so basically the desk wobbles
I saw this and read some bad reviews about it not fitting but found out it was a manufacturing error on Blue' microphones side.
After I placed my order, I received a strange email from Auphonix that informed me my mount would NOT fit the microphone they advertised it for, that this is not their fault but the fault of the microphone manufacturer, and to please not give them a negative review for their product that won't do what I purchased it for
Lo and behold, it didn't fit, and this was about to be an angry 1-star review
You are reading snippets from reviews of Silver Shock Mount For Blue Yeti and Blue Snowball Mics Eliminates Noises From External Vibration
I received an email from Amazon regarding this purchase stating that the size of the hole in the blue yeti may be too large to fit the Shock mount due to a company manufacturing error on the microphone and they would offer a full refund of this was the case
I saw this and read some bad reviews about it not fitting but found out it was a manufacturing error on Blue' microphones side.
I was e-mail by the seller asking to write a review if the shockmount fit the Yeti Pro since apparently there has been a manufacturing error on many Yeti Pro mics in regards to the mounting hole on the mic itself
Due to a manufacturing error with the Blue Yeti, Auphonix offered a full refund if the shock mount would not fit
You are reading snippets from reviews of Silver Shock Mount For Blue Yeti and Blue Snowball Mics Eliminates Noises From External Vibration
More about Silver Shock Mount For Blue Yeti and Blue Snowball Mics Eliminates Noises From External Vibration
Although the Blue Yeti is a wonderful microphone, if left on its desktop stand it will pick up every noise from your desk
All your keyboard thumps and mouse movements are transmitted directly to the micorphone, and can ruin your recording
A shock mount is absolutely vital to isolate the microphone from the noise, vibration and shock
It suspends the microphone on elastic bands, which dissipate any vibration
Leaving you with a pure recording of your podcast, voiceover or singing
No need for any post-recording work
The problem is solved acoustically rather than electronically
Your Auphonix Shock Mount for Blue Yeti microphones will give you a professional sound, without taking up all the space that the Radius takes up
It's made of aluminum and therefore is light and easily transportable
This shock mount comes with an adapter thread to fit all standard microphone arms
So, fix all your Blue Yeti microphone recording problems now with this lightweight and affordable shock mount
Important note..
An intermittent fault with the Blue Yeti microphone manufacture may mean that the mounting hole on the bottom of the microphone is too big, and the mount may not fit properly
This only affects a very small proportion of customers
We of course honor our 100% money back guarantee if this happens.