Holds my S7 firm in the air vent.

I had to choose between either using the mount or using my air vents.

The way this is designed, there are two different sizes/strenghts of the slots that hook into the air vent

The arms to connect to the air vent have come loose from the magnet.

After that, attach the magnet to the air vent on your car

I had to put the holder back to the air vent after detaching it from my phone

The magnet is strong enough for a very sturdy fixation, but the air vent is not steady, especially in curves, so the phone can move when you are driving

The magnet keeps it safely on my dashboard and in the perfect place to see it on the air vent

The clip is secured firmly onto my air vent even though they're the circular air vents which provide so many problems to similar clip products such as this

It goes straight into your air vent, put the magnet piece on the back of your case for your phone, place the phone on the piece that goes into the vent, and there it is

I drive a 2014 is350 and it mounts to air vent quite well.

I have a Suburu BRZ its hard to stick in the air vent

This is small and fits in virtually any vehicle's air vent, making it ideal for me to take with me on the road.

I usually just slide the phone off instead, so it stays clipped to the air vent

a Iphone 6S Plus to a air vent

The only design improvement that I would like to see is that so that it didn't have to cover an air vent at all

When I was trying to remove the phone, the whole thing came off the air vent with my phone

This air vent mount did not work for the I-PHONE 6 + It simply would not hold the weight of the phone while in driving mode

Generally works well but has a tenancy to work loose from the air vent and to loose its grip on the phone when there are bigger than average bumps (potholes, speed bumps).

The air vent in theory seems like a good spot

It allows me to toss my phone up on the air vent and not have to worry about fishing around for it in the cup holder or my pocket

The air vent mount magnet is not strong enough to hold my phone

In my truck, which is a bouncy ride, the air vent holder will not hold the phone in place

holds really well (at least as well as your air vents hold up)

I do wish the part that clips to the air vent was slightly longer, but that's primarily because of the vent design in my vehicle (my vents are recessed into the dash)

I have a 2010 Mazda 3, and the air vents are tilted in such a way that there was a distinct glare on my screen in certain conditions, making it difficult to navigate through unfamiliar areas

This car mount keeps my iPhone 6Plus securely in place on the air vent in my car, and yet my phone is easy to remove from the mount when leaving the car

Easy to pull off your air vent when removed slowly so you don't break your air vent

When I put it on the air vent in the car it fell to the floor because the magnet isn't strong enough to hold the weight.

The holder grips the air vent well

I have used other air vent mounts in the past which were loose and slid around or even fell off

doesn't fit all air vents

Holds on very well to the air vent, much better than the cheap generic one I used previously.

My air vents wouldn't hold it

It fits snug to the air vent on a Nissan Murano, but Not on a 2015 GMC Terrain SUV.

The holder fits right on the air vent easily and when I put my phone on it doesn't move around

It mounts to the air vent wonderfully via its 4 rubber coated fingers that allow for several thickness vents to be used

Pretty good, but sometimes the clip that hangs onto the air vent comes out when I try to pull my phone away from it.

If you don't have an air vent that you can completely shut off, then I wouldn't recommend this product

Tip: Place on the air vents that are stationary

Just make sure your air vents can accomodate this type of car mount.

I gave it 4 stars instead of 5 primarily due to the tension on the extruding end of the air vent hold could use a bit more friction

A few months in the plastic cover on the prongs came off leaving the metal prongs exposed and unable to clamp onto the air vent.

I use it with an Incipio DualPro Case that has double layers, and it sticks to the magnetic piece that you put into the air vent just great

Simply put the metal plate inbetween your phone and phone case and put the magnet in your cars air vent

because of that i keep it off the air vent when not in use.

It fits perfectly on my air vent and I can use it with my magnetic phone case

The battery is EXTREMELY strong and securely holds the phone on my air vent.

The air vent piece stays nicely in place and is easily re-positioned.

It's not an eyesore in the car, because it blends in to the air vent

I just wish it didn't block so much of my air vent in the middle of a heat wave!

I hate that it blocks the air vent

Great on my 05 KIA, but might no be good for people with small air vents in their cars due to partial air blockage.

The air vent mount makes it easy to reposition as necessary

The mount that attaches to the air vent scratched up my air vent

This air-vent mount however affixed firmly onto the air vent, and it sturdier than i initially expected

Also, on my vehicle it makes the air vent non-adjustable.

Every time I grab my phone I have to then pull it off the back of my phone and stick it back in the air vents.

The grips that grab the air vents are really strong and do not slip at all

This is the best air vent mount for your phone.

This is the best air vent mount for your phone.

doesn't stay on the air vent every time i take my phone off the mount comes right off with it, extremely disappointed

Keeps the phone cool while charging, since it's on the air vent.

Basically the magnet would stay on the back of my phone but the magnet would slide out of the rubber part that clipped into the air vents

I expected the mount to stay in the air vent whenever I took my phone off of

Very securely holds phone with a magnet attached to air vent.

I put the square piece inside my speck case and attached the main magnet to my air vent

You simply attach the magnet bulb to the air vent, place the sticker on the back of your phone, attach the metal plate and done

I only wish there was a way of placing the magnet in a different place than the air vent.

They are solid, simple, fit very well on several kind of air vent and have a strong magnetic force

The holder that goes in the air vent however won't stay in place all the time, I tried it on two entirely different cars and it's too easy to pull the whole thing out if you just want to take the phone off

(essentially hold your phone over an air vent and see if it will be easy to see/use from where you will put it)

Basically, the gist is this: if you get the magnetic air vent model (and you should

I wanted it to work, but the fingers don't stay in the air vent, when they ARE in the vent you cannot move the vent

Amazing, does not fall from the Air Vent, super tight which is good

The one think I think people should know is it doesn't stay in the air vents.

Simple to use magnetic phone air vent holder.

it comes with the air vent holder and 2 metal pieces

Pushed my air vent back had to take the console out to fix it

It holds my big note 5 well and fits my air vent

I like that its not permanent, it just clips to your air vent.

The magnet on my phone would always pull the clip off of the air vent which made a huge distraction while driving

The only con is losing an air vent, or most of an air vent

As a phone holder, it holds the phone securely, and it stays firm in my air vents

Pulls off my air vent too easily.

It was very easy to insert into the air vent of my car and didn't interfere with its operations

Easy to pull off your air vent when removed slowly so you don't break your air vent

and I have to close the air vent when I have the phone on the magnet

My only issue with it is that it does block off a portion of whatever air vent you choose to put it on.

Prevents air vent from being adjustable but holds well, stay small and has The added benefit of cooling the phone any time the air conditioning is on.

Other magnetic piece slides into air vents

I love the convenience of being able to mount my phone to the air vents as opposed to my windshield or dashboard

This was a really good idea, but the rubber on the prongs comes right off rendering it useless when used in an air vent.

The air vent in theory seems like a good spot

The magnet is so strong, removing the phone eventually rips the rubber/plastic off the feet that grasp the air vent (happened to me within 1 month)

My only complaint was the rubber backing that goes into the air vents would slide off when I would take my phone off the magnet

The mount holds surprisingly well on the air vents and had no problem with it moving around

The magnet is strong enough for a very sturdy fixation, but the air vent is not steady, especially in curves, so the phone can move when you are driving

I like this product and its concept but the only issue I have is that it covers your air vent

I stuck the metal piece in the designated area inside my Spigen Thin Fit case and installed this on the air vent in my

It fits easily into my air vents and the magnet holds my phone securely, even through the plastic case I have on it

Grips the air vents securely, without causing any damage.

Does not get a firm grip on the air vent, and moves a bit, but it gets the job done.

It's not bulky and fits it any air vent without leaving any damage.

Keep AC on cool or close your air vent before use.

Fits snugly in air vent

Only issue is the magnet can come off of the air vents sometimes

Recently a friend of mine showed me this little gadget that holds the cell phone to an adapter that fits over your cars air vent

After a few times removing my phone, the plastic part that clips to the air vent separated from the metal part.

It fits nicely into the air vent and is small and easy to remove

They are magnetic and snap into your cars air vents

In addition, the mount itself holds very tightly to the air vents

Would not stay on air vent just fell off then the plastic around the magnet separated and fell off

but Some cars have obstructed air vents (usually because of a steering wheel)

The mount fits right in between my car air vent in my Toyota Camry.

It connects to the air vent and unlike other phone mounts that connects to vents, it still allows enough air to come out of the vent

I turn the air vent upside down, then attch the magnetic holder and it works fine.

The metal prongs in the rubber of the mount tore threw and severely scratched my air vent.

I use it in my Skoda Rapid Spaceback and fits the air vents perfect

But make sure that your air vents are flush with your dash so it will work with your phone

works as advertised, very strong magnetic hold, securely stays on air vents, buy it

The air vent holder does not work unfortunately

I was skeptical of this specific product at first because I thought the grips wouldn't hold in the air vents

Works perfect in the air vent of my car.

The magnet works fine and is strong, but I started to notice the mount was having trouble staying on the air vent after some time

Its rubber foot didn't scratch the surface of the air vent

This has been VERY useful, don't get me wrong, but based on the location of my air vents, it causes the phone to cover some of my car's display which is a minor inconvenience

The mag mount clips into the air vent, and small metal plate glues onto the phone case

Magnet hooks onto air vent easily and keeps my iPhone 7+ on very well.

and I would have to separate my phone with the mount physically and then put the mount in my air vent again

Rubber covering on air vent mount won't scratch the air vents

It's a sticker magnet that attaches to another magnet on your car's air vent

The magnet piece, itself, wobbles a bit on my air vent

Also quick to move, so as a passenger I can bring my phone and put it in the air vent and have it on the dash

The magnets are strong, the grip on the air vents is tight and sturdy and matte finish is very easy on the phone surface

When that happens, you might as well throw it away because the round piece that connects to the air vent will just dangle and super glue etc

an iPhone 6s Plus and this air vent mount was working perfectly fine but after two and half months of constant use, It broke down

Fits nicely on on air vent and makes it easy to attach and remove my phone quickly when entering and exiting my car.

Didn't work great on my air vent (Infiniti G37 2010)

However, it does not fit very well on the air vents of my old Toyota Pickup.

As this is an air vent mount that clips onto your air vent

Air vents can’t be adjusted with holder attached.

Since it clips to the air vents, the phone blocks a lot of the air flow

The nibs that hold it to the air vent are very soft, which prevents it from scratching your car

Rubber covering on air vent mount won't scratch the air vents

I'd recommend it, but double-check your air vents because there's a chance that the attachment may not be as secure as you'd like.

Issues with this product include:Unclear directionsThe rubber part that clings to the air vent of the car came off after hot weather, so it could no longer attach

This product works well, but occasionally the piece that connects into the air vent comes off

only thing is the rubber cover on the mounting area broke and scratch my air vent, Over all works great,even my husband uses it when he drives my car

It can be tricky to place in air vents depending on what vehicle you have.

I don't use mine except for on longer trips so I can take it out of the air vent and toss it into my center console when not in use, or can swap between mine and my wife's vehicle as necessary.

Holds phone in place but exact position is hard to choose according to the different air vents in each car

This air vent mount is a good alternative, it doesn't take up too much room

Another complaint is that with it having to be in the air vents, I was unable to use the AC or heater in my car

My phone has fallen off once because my air vent in my car is facing almost straight up and

This doesn't work very well with a Ford Escape because of the air vents

It does limit the movement of the air vent, but that's not a big deal for me because I usually keep mine in one place

But make sure that your air vents are flush with your dash so it will work with your phone

Works great but phone does block your air vent and will get hot or cold when using heat or air conditioning.

It only fit on one vent and when I put my phone on it, the entire air vent was blocked and my phone was frozen from the AC.

I can still use my own phone cover and the magnet mounts right onto the air vent it keeps my phone in safe arms reach I used to have it either in my purse or drink holder

Great product, easily clips to air vent

It attaches to the air vent and doesn't slip at all.

Kind of annoying in the summer because it blocks an air vent,

I use it in my Skoda Rapid Spaceback and fits the air vents perfect

The car mount clips onto my air vent, and all I have to do is press my phone against it and it stays

The mount has slid off the air vents twice.

Also, if the rubber grip comes off the base magnet, just put it back in place, it won't affect how firmly it stays in place in your air vent.

Disappointed I purchased these not knowing that I have the wrong air vent I have a jeep wrangler

and it stick nicely to air vent

Works as it should.

I asked for a refund on the case as well as it got all scratched up due to the 3 drops it caused before I quit on it

I also put the magnet on the bottom part of my phone which makes it lean as you start turning the car

I am a human officer and do a lot of driving down roads that do not really qualify as

I still recommend Spigen as they make wonderful phone cases.

If you miss the target, it is best to miss high as it will slide down into place instead of falling off.

Would love a

hope really well n is really worth the money i paid.