The air vent is vertical in our truck and the car mount won't stay in place

Seemed sleek, but you have to fit it on the air vent which does get your gaze down from the road while driving

My issue is how it attaches to the air vent

Doesn't fit in my airs vents

It slips off the air vents when I try to pull my phone off of the magnet and the swivel ball has lost its strength after just a week, but other than that it does the job.

I mounted the mount on the air vent with ease

Liked it but magnet is very strong so it would not stay in air vent great, meaning it kept coming out when I grabbed my phone.

It doesn’t fit all air vents, it is so heavy it actually causes my phone to fall down, and the extra magnets compared to the older version make it hard to remove the phone

My one complaint would be that the magnets are stronger than the grip this mount provides on the air-vent

But over time, the rubber clips on the air vent mounts started to expand (possibly from the weight on an iPhone 6s) and then today, the ball joint and screw fittings completely crushed

The only complaint I have is that the magnet is so secure that the mount comes loose from my air vents almost every time.

Put the metal plate on the inside of the phone case, and the Air Vent mount will hold the phone in place

Does not hold well in the air vent

It sticks to my air vent

At first I was hesitant about the friction mount to the air vent but it is pretty tight

For those looking for a air vent holder, keep in mind that the vents are designed to move, and therefore, they're not the sturdiest part of the car to put a phone holder.

The part that holds the car mount on the air vent could be stronger, maybe have a support on the back to keep the vent in place instead of pulling it down with its weigh, but it's the best magnetic car mount that I've found so far.

the teeth that grip the air vents are now made of a softer, more flexible rubber

and he magnet head broke off from the clip that attaches to the air vent

In other words, they will fit snuggly into any car air vents without falling out

I have to rotate the air vent upside

The entire holder came off the air vent when trying to remove the phone.

They work great, but sometimes when you pull the phone off the mount, the magnet is so strong it pulls the holder off the air vent.

The phone is held strongly in place, in fact, if you just pull the phone, it will pull it out from the air vent!

I have a 2012 Nissan rouge and the air vents are a bit strange

Product is quite easy to use and just clips on to one of the air vents

would be nice but the phone and mount are too heavy that they move the air vent/makes it difficult to actually use

The magnets are strong, it grips tightly to the air vents, and the medal plate fits perfectly in my spigen iphone case

I love that the mount doesn't sit flush on the air vent

I ended up putting the magnetic portion of the mount on to the air-vent connection portion of an old mount I had for my Garmin GPS.

Doesn't fit my car air vents perfectly, and it will come off the vent with my phone occasionally, but that is fine because every cars air vent will differ in some way

The unit slides out of the air vent when removing the phone.

This device would not hold my phone (Pixel 2) securely in the air vent of either of my cars

You just slide it into an air vent

I had an older version of this product for my other car and when I bought a new car the older version was too short to install it on the air vents.

My boyfriend has the same one and for some reason on my air vents it keeps falling off

It enables me to place my phone over an air vent next to center console screen

Wish the grabbers that attach to the slats of my air vent were more substantial so it would stay still

but I still fall for the Air vent mount

Sometimes it is difficult to keep on the air vent and sometimes tightening the magnet surface is not sufficient to hold the phone up, both of which are disappointing

This product works great the only downside is that if you have small air vents, when you reach to pull off your phone (in my case IPhone 6s Plus) the whole thing comes off.

It does not stay attached to the air vent when you remove you're phone

Holds iphone 7 plus securely in place on the air vent

Every time you try to remove the iPhone from the car mount, the mount detaches from the vertical air vent

After about a month it loosened up enough on the air vent to fall off and under the seat

I also like how low profile this mount is - you can barely see it's there when looking at my air vents

very good, the magnet is strong, but to get it of sometimes it comes out of the air vent

The magnet is pretty strong, but the connection to the Air Vent is not

Fits securely in the air vent of the car and strong grip to the phone noting that taking off the phone is very easy and don’t affect the air vent

The magnet head broke off from the clip that attaches to the air vent.

Installed it in an Infiniti G37 with vertical air vents and happy to report the mount holds the phone in place very well

I was never a fan of the Air Vent mounts but I decided to give this one a try

The only downfall is that you lose the ability to aim one of your air vents.

I would pull the entire mount off of the air vent instead of my phone off the mount

Here is a hint if you air vent wants to fall down just use a x-small spring clip on the bottom louver.

I had it on the passengers middle air vent in a 2017 Accord.

Within a month of using it the rubber where it's meant to grip the air vents completely came off and exposed the underneath material

The magnets are pretty strong and the mount fits snug in my air vent.

Very easy to mount onto the air vent and hold the phone securely.

Previously had the "normal" Spigen air vent mount that is a circle and it would not hold my phone at all.

I installed mind in air vent of my car and never moved it since

My only complaint is that the air vent holder comes off easily so oftentimes, when I go to take my phone off the magnet

This particular one mounts into the air vents of your car

Concept is good product is bad, it won't attach to air vent.

After using numerous car mounts, from Pro Clip to other air vent mounts, I can honestly say that this is the best, most convenient way to mount your phone in the car

It comes down to how well your vents will stay in place because depending on how you connect this to an air vent, it could very easily cause the vent to be moved downwards

Because this item allows some space in between the air vent and the back of the phone and also makes the vent point down (inevitable given the weight of my iPhone 6S plus) I do not expect significant issues when running the heat or A/

The non adjustable magnetic mounts don't work with my air vents

Well made and fits snugly into my air vent

With the Scosche brand if I hit a bump or turned it would disconnect from the air vent and my phone would fly across the car

This does not fit snugly into my air vent (Subaru BRZ) using either size opening in the mounting cone.

I was using a different brand of magnetic air vent mount which I was very happy with, but this one is much better

Just put the thin metal plate that it comes with inside your phone case and stick this to one of your air vents and you have the best and easiest car phone mount I have ever used.

2nd, the grip that holds the whole thing to the air vent is also a bit weaker than I would hope for.

The mount does not stay on my air vent

Rarely comes off of air vents from release

Definitely recommending Spigen products as I bought a Spigen Liquid case for my

That's where this product shines as it is fully adjustable and the magnet works great

the third party applications (e.g. Waze) that Apple still will not allow to work with CarPlay in Hyundai vehicles as of today

The only bad thing I've found is that after some time (probably after a year using it) the anchor started to wobble a

Its soo easy to install and holds the mobile v well