• Reviews around air vent (1.19 of 5)

    TechMatte MagGrip Air Vent Magnetic Universal Car Mount Holder for Smartphones including iPhone X, 8, 7, 6, 6S, Galaxy S8, S7, S7 Edge

    • I love having my phone secured on the air vent in my car, & I also use the mag grip to hold my phone up at an angle for hands free viewing
    • (DO NOT GET IT especially if your vehicle has metallic air vents
    • Only thing I dont like is every time you pull your phone from the base that's in your air vent, it pulls the base out of the air vent bc the magnet on your phone is so strong
    • The clip sits at just the right spot in the air vent
    • I've tried attaching it every way, but the base just will NOT stay attached to the air vents when I pull the phone off
    • Once you attach the MagGrip (part one) to your air vent it stays there
    • The product comes with the air vent holder (strong magnet) and two different sized flat metal plates to attach the magnet to.
    • But if the air vent is round or has a special design, it does not work
    • Just slip the metal piece between your phone and case and it secures firmly to the magnetic clip in the air vent
    • Be careful putting into air vents it can break a vent fin off like I
    • I did not think through that plugging into the air vent would block air, so it cannot be used on cold or hot days when you need to turn on air conditioning in the car
    • The MagGrip has a nice tacky grip that fit in the air vent of my 2010 Honda Fit.
    • Magnet was strong but the phone was too heavy for the air vent
    • I would recommend it but warn that it might not fit everyone needs.1) Air vents typically swing easily left-right or up-down
    • Great magnet, but that's about all, doesn't fit very well in air vents, when you retrieve your phone magnet pulls out of the vent.
    • It's holds very tightly to the air vents, and the magnet is strong enough that the phone stays in place.
    • My one minor issue is that it seems to stick better to the phone than to the air vent in the car, so when I grab the phone the mount sometimes comes with it
    • The prongs on the back of the piece are a hardened flexible silicone material so it doesn't scratch my air vents
    • Works better if your air vent turns off
    • Doesn't work for 2005 Scion xB. This is not universal, as it doesn't fit in my air vents
    • Didn't quite fit the air vents in my car
    • The soft grippy arms on the rear of the MagGrip haven't damaged my car's air vents (at least, not so far)
    • 5 stars is because sometimes it falls out of my air vent, but for the money, its worth every penny
    • and they're always in awe when I put my phone on the air vent lol
    • The way the air vents are set up in my car (Jeep Wrangler 2012), the MagGrip Air Vent Magnetic Mount Holder tends to move quite a bit and is not very stable.
    • Need to "slide" phone off the magnet so that it doesn't come off the air vent.
    • Just insert it into air vent, put the metal strip in your phone case (or attach it to the back of your phone), and tap the back of your phone/case to the gadget
    • Product works as described, but the air vent piece will come off with the phone anytime you try to detach it
    • I used to have a phone holder that attached to the glass, but I much prefer this type even though it blocks an air vent.
    • Only con would be that if you leave your phone on it slightly blocks your air vent
    • Not all air vents allow to close air flow and keep vents themselves open so you can attach the holder
    • Sometimes it falls off of the air vent.
    • It worked very well initially but later on it didn't get fixed on air vent
    • When not in use while in he car you really don't even notice these devices on your air vents.
    • Clips easily onto thr air vents
    • Good for what it’s meant to do, after a while the plastic grip tears and damages the air vent
    • Rubber dries out and mounting slot spreads and will not stay attached to air vent
    • This product has scratched and damaged the air vent
    • No matter where the air vent mount moved, there was my phone
    • Do NOT get this for your car and do not put it in your air vent
    • With the device attached to my air vent it will be difficult to move the vent up and down when it gets too cold or too hot.
    • it's temperature with the air vents.
    • Built solid, attaches to air vent securely
    • Nice but the air vent grip is not long enough...
    • While this did a great job of holding both my iPhone 6s and my wife's iPhone 6 plus, the grips holding the mount to the air vent gave out on both of the one's that I bought in less than a year with normal use
    • The air vent one works great, so nice to have a car mount I can trust in both of our cars!
    • There are no scratches to my air vents
    • Product slips out of the air vent easily, but i definitely use this every time i'm in the car!
    • The metal pieces came out of the rubber grip and scratched up the air vent of my
    • Sticks to air vent which is a necessary so you can see the screen
    • The phone is so heavy, it tilts the air vents down if I go over a bumpy road; 2.
    • The magnet is strong enough that it connects through my solid wood iPhone case and mounts easily into my air vent
    • The TechMatte MagGrip works as advertised; however, be aware that your car's air vents may not cooperate and provide a stable mount.
    • , I liked the fact it didn't require any installation, just fit right into the air vent
    • It works fine on regular square or rectangular air vents
    • On the other hand, the way the magnet is attached to the air vent is basically just friction of the vent slat between the rubber bits on the back.
    • Wouldn't stay secure to the air vent.
    • So, every time I try to take my phone off, the magnet (which is super strong) also pulls off the base from the air vent
    • It is so strong that you can not pull the phone off the magnet without pulling it out of the air vent.
    • The car mount is easily transfered to any car since it grips to any air vents
    • The prongs that fit on your air vents has stretched to the point that it is too loose to stay
    • It does not stay plugged to the air vent at all
    • The prongs that go on your air vent don't stay hooked into the vent
    • It did what out needed to do, but I do not recommend one that covers an air vent.
    • First couple of times I grabbed my cel phone, the air vent mount detached from the vent and was stuck to my phone (guess you could say the magnet at least worked).
    • It fits perfectly in my air vents
    • The CD mount worked so well, I decided to buy the air vent mount
    • Had a bit of difficulty getting it into air vent
    • The grip is strong and doesn't slide off of my air vent
    • It fit easily on my air vent and the magnet is strong enough to work through my phone case.
    • the product scratched my air vent because the silicone rubs off to reveal metal bars underneath
    • The mount makes the air vent rotate downward.
    • I have it in the air vent and it holds my phone wonderfully
    • When I take my cell phone off the magnet, the air vent piece comes off the vent
    • (Basically just stick it on your car's air vent)
    • I loved the fact that, by just rotating the product, you can have slightly wider opening for thicker air vent vanes, or for thinner vanes
    • The CD mount and the air vent one
    • work awesome on regular air vents.
    • It might not work on every car, depending on your air vents.
    • The magnet is strong but the grip on the air vent to weak.
    • securely mounts to my cars air vent and the magnet is strong enough to hold the iPhone 7 plus through a thin spigen case.
    • I love the fact that the thin metal square fits inside my case with no problem and the magnet is just strong enough to hold my phone secure and still easy enough to pull off the air vent
    • plugging this at air vent is a wrong idea
    • The one I bought a year ago was just so overused, it wouldn't hold onto the air vent any longer.
    • Then out to the car to attach the MgGrip AirVent Magnetic to the air vent.
    • The problem I have it that when attaching it to the air vents it blocks the air circulation
    • I've had no problems with the mount coming out of the air vent which I had been worried about.
    • Does partially block one air vent - not a big deal IMO.
    • ProGood magnetic holder for phones less than 5"Fits air vent tightly in an accordNo clips to mess aroundConNeed to make sure my S7edge is centered, otherwise the phone may rotate and sometime
    • It doesn't block the air vent like most and it holds the phone very securely.
    • Holds tight in air vent.
    • I had bought another type of phone holder that kept falling off the air vents
    • Clips right into the air vent.
    • Does not work on my circular air vents on my F150.
    • Superb!Magnet is strong and holds great on the air vent
    • The magnet is so strong that sometimes the Air Vent Port comes out with the phone, but it's plastic so it doesn't damage my air vents
    • The air vent one works great, so nice to have a car mount I can trust in both of our cars!
    • I know you are thinking, "Compatible?", dude it is a air vent mount
    • Will not break air vent
    • Just have to place the magnet in the back of your phone case (doesn't damage the phone) and attach to the grip on the air vent.
    • fits into the air vents of an old BMW 325 and hold itself steady enough during driving
    • Started out great, but eventually, the space between the prongs that attaches to the air vent will wear out and expand, eventually to the point where it won't stay put in the vent
    • It's an easy fix just tighten the magnet to the thing that clips on to the air vent you just need to twist to tighten the stew inside
    • I don't think an air vent mount is right for me, as I don't like my phone to
    • The product works well, holding my phone on a magnet attached to my air vent
    • The grips that connect to the air vent don't grip firmly, so when I detach the phone, the car mount comes off the vents; and 3.
    • The clip would work on both vertical and horizontal air vents
    • Speaking of the air vents: in my car, the air vents swing vertically, and with the weight of the mount and the phone attached, the vent swings downward to its lowest extent
    • Also fit in the air vent of my wife's 2017
    • The Corrola and Highlander have smaller air vents, so the fit is much more awkward, and less adjustable.4
    • I have a standard air vent mount
    • Great idea, I wish you can stick it somewhere else but the air vent
    • the mount does not stay in the air vent constantly falls off
    • It fits well on my air vents.
    • I noticed sometimes when I would place my phone on the air vent magnet it would flip upside
    • The mount stays secure on my air vent, and the magnet keeps my phone secure, but is not difficult to remove
    • The only downside is the black blends in a bit with the air vent--we've forgotten this guy in rental
    • Just place magnet on your phone case and then place the MagGrip on the air vent in your car and you’ll have GPS to help you through traffic.
    • work well for my car air vent
    • Unlike others I have tried, the magnet is strong enough to hold the phone in place,and the air vent clip holds the phone securely and can be easily adjusted to present the phone at a good viewing angle
    • Something we did not know until we noticed our beautiful MB had scratches on the air vents and other places where we used to place the magnet
    • Attaches very well to the phone and fairly well to the air vent in the car
    • Will not break air vent
    • The air vent mount is the perfect solution
    • The air vent one works great, so nice to have a car mount I can trust in both of our cars!
    • It worked on my vehicle just fine on the air vent as indicated
    • Only caution I'd have would be to be aware of the orientation of the air vent
    • The magnets are strong and the holder fits tightly on the air vent.
    • Does not stay on car air vent properly
    • Do not hesitate for one second to buy one of these air vent mounting products from this company because they will stand behind the product 100%
    • It doesn't block the air vent like most and it holds the phone very securely.
    • once I tried to pull out my cell when I leave from my car, it came out air vent attached with my cell
    • After about 30 days or so the strength of the magnet overcomes the adhesive of the metal plate and the phone simply falls off as you are driving along leaving the metal plate securely hugging the magnet
    • I have used the thin plate between my iPhone case and the phone itself (unstuck) as well as on the outside of the case (Permanently) and works great either way.
    • I would prefer not to see the magnet on the exterior of the case, as well as, I'd prefer not to have to remove my case from my phone.
    • Works as it says it would.
    • , they work exactly as they are supposed to.
    • Mine is already broken I like to