Voodoo Lab Pedal Power 2.1mm Current Doubler Adapter Cable - 2024 report by Whydis

Voodoo Lab Pedal Power 2.1mm Current Doubler Adapter Cable

The Voodoo Lab PPAP is for pedals with higher power requirements, use this current doubling adapter with a 2.1mm jack to combine two Pedal Power outputs. (Frequently used to combine outputs 5 & 6 on a Pedal Power 2+ to create a single 9V 500mA output...

Reviews by Features

Volt

(1 reviews)
Interface

(1 reviews)
Ma

(1 reviews)
Output

(1 reviews)
Glitch

(1 reviews)
Center

(1 reviews)
Product

(1 reviews)
Price

(1 reviews)
Switchs

(1 reviews)
Wire

(1 reviews)
Input current

(1 reviews)

Save on Pinterest

Recommended :

Reviews around volt (5.00 of 5)

  • Using this to power my Boss MS3(requires 9v 500Ma power supply) from a voodoo lab power plus 2 using ports 4 and 5 with dim switchs on normal ( this doubles your Ma's not your volts) as recommended by voodoo lab tech via email

You are reading snippets from reviews of Voodoo Lab Pedal Power 2.1mm Current Doubler Adapter Cable


Reviews around interface (5.00 of 5)

  • Great interface to run a Line 6 M-9 pedal

You are reading snippets from reviews of Voodoo Lab Pedal Power 2.1mm Current Doubler Adapter Cable


Reviews around ma (5.00 of 5)

  • Works well with my Voodoo Labs 2 power supply allowing doubling of, for instance, the #5 and #6 outputs with dip switches pushed away from "normal", and providing, I believe it is, 400 ma instead

You are reading snippets from reviews of Voodoo Lab Pedal Power 2.1mm Current Doubler Adapter Cable


Reviews around output (5.00 of 5)

  • Works well with my Voodoo Labs 2 power supply allowing doubling of, for instance, the #5 and #6 outputs with dip switches pushed away from "normal", and providing, I believe it is, 400 ma instead

You are reading snippets from reviews of Voodoo Lab Pedal Power 2.1mm Current Doubler Adapter Cable


Reviews around glitch (5.00 of 5)

  • It worked good most of the time, however I did notice a "glitch" now and then, depending on which program was selected, since the pedal is rated at 9v dc, positive center (reverse polarity) and 1200 ma!

You are reading snippets from reviews of Voodoo Lab Pedal Power 2.1mm Current Doubler Adapter Cable


Reviews around center (5.00 of 5)

  • It worked good most of the time, however I did notice a "glitch" now and then, depending on which program was selected, since the pedal is rated at 9v dc, positive center (reverse polarity) and 1200 ma!

You are reading snippets from reviews of Voodoo Lab Pedal Power 2.1mm Current Doubler Adapter Cable


Reviews around product (5.00 of 5)

  • Good product at a good price.

You are reading snippets from reviews of Voodoo Lab Pedal Power 2.1mm Current Doubler Adapter Cable


Reviews around price (5.00 of 5)

  • Good product at a good price.

You are reading snippets from reviews of Voodoo Lab Pedal Power 2.1mm Current Doubler Adapter Cable


Reviews around switchs (1.00 of 5)

  • Using this to power my Boss MS3(requires 9v 500Ma power supply) from a voodoo lab power plus 2 using ports 4 and 5 with dim switchs on normal ( this doubles your Ma's not your volts) as recommended by voodoo lab tech via email

You are reading snippets from reviews of Voodoo Lab Pedal Power 2.1mm Current Doubler Adapter Cable


Reviews around wire (1.00 of 5)

  • I needed some more juice from Voodoo power 2+ and this wire does the trick

You are reading snippets from reviews of Voodoo Lab Pedal Power 2.1mm Current Doubler Adapter Cable


Reviews around input current (1.00 of 5)

  • Will, double your current, but can also be used in reverse to power 2 pedals as long as the input current of the added pedals doesn't exceed the out put current of the power supply

You are reading snippets from reviews of Voodoo Lab Pedal Power 2.1mm Current Doubler Adapter Cable


More about Voodoo Lab Pedal Power 2.1mm Current Doubler Adapter Cable

  • The Voodoo Lab PPAP is for pedals with higher power requirements, use this current doubling adapter with a 2.1mm jack to combine two Pedal Power outputs
  • (Frequently used to combine outputs 5 & 6 on a Pedal Power 2+ to create a single 9V 500mA output.) This adapter will accept any cable with a 2.1mm plug.