-
I do not believe that is the fault of the piece itself, but the simple nature of it being such a precise drill bit that you need to be very careful when using it
-
I already lost the 8 extractor bit unfortunately, so keep them tidy in the neat case!EDIT: The company shipped me a replacement for the missing bit
-
I wish these were little bit more sturdy and heavy, surely would have lasted longer
-
Despite using care to keep the RPM low when extracting a screw, the bit broke on its second use.
-
These bit are just soft crap
-
I broke an extractor bit on a stuck bolt and contacted them and they sent me a new kit two days later.
-
First bit broke immediately.
-
Literally the second bit worked out of this kit and 30 seconds later, the stripped screw was extracted.
-
I was careful to use the drill at the recommended rpm and it did not seem that the bit was overheated and possibly fatigued due to heat.
-
Was using the first bit to distract bolt with hardly any force at all and it broke wouldn't recommend this garbage
-
I used the reamer first and had a good bite on the bolt head, but the bit sheared in half under torque
-
I drilled the pilot hole, inserted a bit from the tool and tried to back it out...the bit broke off in the hole almost immediately on the first turn.
-
The smallest bit works for the small screws
-
Broke bit on first stripped screw I tried it on.
-
When this arrived I drilled out the center of the screw and using right bit
-
Was missing the extension bit, but messaged the seller and they are sending one
-
Most of the negative reviews I have seen were about breaking the bit
