Basically its enough to get you in the air at a decent price to decide if you want to invest in a good quad

I would suggest you not get this unit if you are trying to get a decent starting racing quad.

Nice quad, easy to build even though it doesn't come with instructions

Has everything you need and more to build a decent quad for the beginner or even novice

Everything you need to build a decent quad is right here and at a really good price, looking up the same individual components I don’t think you could even get these parts this cheap!Flight controller needed a firmware update (easy to do on cleanflight) and everything was smooth flying from there everything else worked perfectly.

Great service and a very good and nearly complete drone build all in 1 package

Ps, for a clean build I recommend measuring the esc wires to length then soldering them to the pdb

Good first build but now is showing its age as a combo even at this price point

But I found one YouTube channel that had a decent build tutorial on the frame

(3s would work fine with this built).- FPV receiver (goggles or screen) if you need tot try FPV out of the box.__Summary__Solid starter built

so Im going to see if the company will replace it and report back, but everything else works like it should and was packaged just fine

The optional LED motor pads and motor guards are a plus

The only bad comment I can make about this quadcopter is the stock red and green LED motor pads

I would like to see LHI offer an option of colors for the LED pads

Stock vTX is 600mW- One bad ESC out of the box- Cold solder joint on AKK X1 vTX, broken SMA connector after a few soft landings- Red and Green LED motor pads (not red/green color blind friendly)- Camera angle has limited adjustabilityUnboxingEverything included in the kit came inside one LHI branded box

Build was easy though and well documented.

The flight controller is an SPRacingF3, which is well documented and works well with Betaflight

This kit is well put together, with good quality components.

The components in this kit are awesome with a known frame to boot!

Although components may not be top of the line, they are of great quality

this thing is also tough im learning to fly fpv on it and obviously have crashed i even crashed it on into the roof of my house which then fell off on to concrete about 30 feet drop NO BROKEN

Got the product and noticed I was missing a few things

Loving this thing rock solid buttery smooth motors could be a bit punchier though

Another great thing is you can connect the esc's to blheli and switch the motor rotation!!

(if you dont get a dud like I did), the flight controller is great and able to run betaflight, PDB is a no bells or whistles PDB, cam isnt the greatest but will work, the VTX is good

The Flight controller came bricked and the VTX isn't stable or transmitting to the right channel

The VTX and antenna are a little cheap but all around value is awesome.

Whoafly is amazing(don't buy it from anyone else there service is unmatched).

Very poor customer service

Great service and a very good and nearly complete drone build all in 1 package

The build to the price to the fast shipping and my favorite customer service.

However this vendor was and is the best customer service I have ever experienced

I tried clean flight, beta flight, and a few more and couldn't get any thing to work there for I feel I got

I have a bad flight controller, one bad ESC, and most of the heads of the nuts round out from taking it apart so many times during troubleshooting

The flight F3 flight controller is a good flight controller to start with

Still awaiting new ESC but the motors that do run seem to be sluggish on clean flight.

Everything you need to build a decent quad is right here and at a really good price, looking up the same individual components I don’t think you could even get these parts this cheap!Flight controller needed a firmware update (easy to do on cleanflight) and everything was smooth flying from there everything else worked perfectly.

A lot of fun and not hard to build, had a bad ESC found during test flight.

During the tuning process I had one ESC go bad, which conveniently was connected to motor 1

I have a bad flight controller, one bad ESC, and most of the heads of the nuts round out from taking it apart so many times during troubleshooting

it was my fault not a bad ESC and Liz from support hooked me up with a new ESC anyways!

The seller has offered to send me a replacement esc free of