The bits dull

After only two uses, the two smallest bits broke :-(

Both have cut through pine and poplar with ease, I do not expect the other bits to have issues, Shank fits into my Craftsman Router and Router Table

These bits will be fine for what I need them to do

These bits work great and the price is not too steep.

These bits work great and the price is not too steep.

These are all very sharp and smooth bits

Always nice to get new sharp bits and these are sharp.

Switched back over to my old "dull" bits and tested them out on the same type of wood

I broke the smaller bits, but the rest work pretty good.

Be aware of this as I already have the most popular bits in this set and had to return them for a refund and order the 1/2" version.

The good router bits are precision tools with good bearings, sharp edges.

The bits burnt the wood at shallow passes and at different speeds in my router

but two bits broke with in the first 25 mins of using

very cheap bits.

Remember, you get 24 bits for the price of one or two name brand bits, so temper your expectations.

they are cheap bits.

I can see that these bits are not top quality and will be replacing them as I need to with better bits

At this point I recommend these bits whole heartedly

Nice router bits, better quality than I was expecting

First two bits I used broke

Pretty lousy bits... dull and soft

All the decorative edging bits work well enough but the straight/trim bits produce a lot of chip-outs and heat up fast, regardless of the speed

While the bits themselves are reasonably robust

Do not abuse these bits or they will not hold up.

Nice bits, exactly what I wanted for a beginner set.

I bought these as my first set thinking I’d save money by buying these cheap bits

Smaller bits broke easily

Was hesitant on buying cheaper bits, but was glad I did, especially for a starter set and for occasional use

Haven't used all the bits but the roundover sure works great.

They are cheap bits, I pushed the straight bit 1/8 a little too hard.

These bits are absolutely horrible

1/8” straight bit broke off just few seconds later in its first use..other bits

Once you pick out some favorite bits, then you can go spend $30 a piece on some nicer ones.

he spent entire day working with the bits & router, called us in the evening, thanking us for the excellent bits & router

Save yourself the time and money and spend a little more for good bits.

Very good bits

Perfectly good router bits, but not for Dremel.

Great bits at a great price

The next straight bit seems a bit better, and I've since used the flush trim and t bits that worked fine on the Pecan.

I got this as a starter kit and all the bits are fine.my problem is that I've started using the router

several bits have broken off while using them

Found some as favorites and will buy a better bits of them.

With cheaper bits the trick is to slow down the cut and not overheat the cutting edge.

The bits cut extremely accurate and are easy to use even for routing beginners!

I really like bits that are packaged in sturdy boxes that will last.

I would recommend theses bits to anyone who doesn't want to pay a ton for some

These bits are def worth the money and out perform my expectations.

It would have been 1 thing to leave a rough edge but these bits are deadly.

I have an old router that was burning up my old bits

These bits are horrible

These are probably not the top shelf bits

In all honesty, these bits are complete garbage

" straight bits worked well, but had quite a lot of tear out (they each have cut through less than 4 feet of wood)

Do not be like me - spend a little more money and get a set of good router bits.

The larger bits work fine, but the 1/4" bit snapped on me after about 15 minutes.

Good starter set, bits are limited, but with care they will last quite a while.

Beginner woodworker having fun using all the bits by hand and on a table

so I went the cheapest bits with the best reviews and these fit the bit

I broke the smaller bits, but the rest work pretty good.

Great bits so far I would give it five stars but when I opened the box the racks both fell out the shelf broke during shipping

box holding the bits feels cheap but the tools work as expected

nice set of bits well made

I have use 3 bits already and can't complain.

The bits look good, but the top row was disconnected when I opened the box.

I would recommend these bits to anyone.

My husband loves these bits

Not sure if it the fact Im using this set in a B&D Matix router attachment, or because the bits just aren't that good, but the cuts and edges I get are rough, and sloppy

The bits are fairly good

I probably wouldn't order it again just because the bits don't seem as durable as they should be.

If you're looking for some good quality bits, you found 'em.

These bits are better than I was expecting, my rule of thumb has always been buy cheaper bits and see what you actually use then buy higher quality

The bits themselves are decent for being such a low cost set

I purchased these router bits to use with my table mounted router and they work great

So far, the bits that I have used work great.

I vowed to never buy cheap bits again

would recommend these bits

I was going to rate them 4 stars, because they aren't anywhere near as good as my Freud bits that I have, but I am a beginner woodworker and these are a great starter set of bits to get me used to using my router and give me versatility while being affordable.

purchased with the router excellent bits

Awesome bits for the price.

Already broke 2 bits with a very weak harbor freight router

Very reasonably priced carbide tipped router bits

As the headline says, these bits are certainly cheap

These are perfect if you want bits that burn cutting plywood and roller bearing that won't last 30 seconds of work

Cheap bits

so it doesn't matter if you trash the bits

These are very good bits as for someone who enjoy's doing woodwork I've have used every bit a

Gr at deal, great bits!

The bits are as promised and are superb for the price.

I like these bits

I'm a casual wood worker, and for the price these bits are worth 5 stars to me

A little background on routing will help you prevent problems like tearing your work piece by cutting in the wrong direction, and damaging your bits by trying to remove too much material in one pass

not the best bits, but for the price well worth it

Bit are ok, broke one quickly, for

Great router bits, very happy with purchase

Some bits are visibly defective and the box already fell apart after opening it twice

so I could see which bits I would use most often and replace them one by one with better bits individually.

Also, helps you decide of what design that you prefer the most without breaking a bank of buying expensive bits and come to realize you don't like it

I bought this kit because the price was awesome, I have used some of the bits to make some baseboard and window trim with some pine I had laying around and the bits I used were great , I have no complaints ,they cut through wood like butter.

These are cheap bits.

Besides the wonderful Router bits....I love that the bits sit nicely in their own slots and they are described with pic how they perform

Horrible cheaply made bits

These bits are so incredibly dull

Inexpensive starter bits who's just starting to get into woodworking

For the price you get a very nice assortment of what appear to be decent quality bits

Shipping was super fast, bits were packed well.

They're not the sharpest bits ever

These bits are better than I was expecting, my rule of thumb has always been buy cheaper bits and see what you actually use then buy higher quality