I used this led strip to add accent light to my truck I have it wired to my dimmer circuit and the strip is mounted under the dash

I gutted the old 30W fourescent fixtures with a "U" tube and replaced it with a driver and this led strip

The strip was perfect and had good quality 3M glue that did stick to the wooden platform.

The strip glows very brightly

I bought this length of led strip to line the inside of a cabinet wall unit that I'm using for a nice little cigar and humidor display area

On my mantle I hid a long LED strip behind a length of half-inch quarter round molding.

This led light strip is awsome easy to install and very bright, i install this on my kitchen ceiling and the work great and the price is right.

The strip itself is excellent

This led light strip is awsome easy to install and very bright, i install this on my kitchen ceiling and the work great and the price is right.

Bottom line, these LED strips all got the job done, but the inconsistent quality leaves me wanting.

And the LED strips have a black piece next to the LEDs that interferes with the closing of the connector clasp

Great LED strip, easy to cut and re-use with the proper connectors and, if needed, you can re-solder them to make the strip bigger again.

However, a product change in the 300-LED strip and/or the end connectors that I recently purchased caused me lots of frustration and several wasted connectors before I figured out a work-around

They are on a really thin fat strip you can place them anywhere.

I even had extra LED Strip left over, I have roughly 4 feet left and they have leads on them

This LED strip is awesome

strip must be stretched tight when installing, the tape buckles short otherwise.

Depends on what you want to use these LED strip(s) for

and they both didn't include the USB adapter, without that who am I supposed to electrify the strip?

I previously had soft white strip lights that burned out

I applied some solder and connected the ends of the wire to the ends of the LED strips and the lights worked instantly

The LED strip came with a female DC terminal attached to one end, and open wires on the other(you would need an AC->DC transformer to plug it into the wall

It turns out that they have been falsely advertising using images of another (and much more expensive product - try inverse image search using Google)I have attached 2 images of a white paper under a true warm LED bulb and under their LED strip for everyone to see the difference

when I do break the strip somehow, I'll have enough left from this roll to put it on again.

Very simple solution with Hitlights LED strip lights to light up my kitchen cabinet

If more than 3 fail (a whole strip), the problem is probably in wiring or power.

The new higher quality LED strips I bought have a strong adhesive that hasn't moved in weeks.

But the only problem was that the connector has a clasp and prong end that is suppose to connect to the copper circles on the cut ends of the LED strips and it does not line up well to make a secure connection

The light strip was breeze to put up, the adhesive tape made the job easy for just one person and blends in nicely with my wood trim along the ceiling.

Also, it is in a weird strip and they don't look very kid friendly

Good Quality LED Strip

I ordered red, green, blue, and white versions of this LED strip.

I've purchased a lot of LED strip light rolls from Hitlights, and have always been pleased.

The small light strip by itself worked, the power plug in, and the remote all worked as prescribed.

3528 Type, 300 SMD, 24 Wattto18 gauge speaker wire (soldered)tomore LED's (soldered)I did not want ugly black and red wires between LED strips to show at any

I've just started toying around with LED lights and it's safe to say when ordering LED strips these are definitely the way to go

Bought LED strips from others

First of all these are the most sensitive little strips, on the first set I didn't take as much care to prevent twisting in my awkward space so the whole thing flickered and just died after one day

I used a 12 volt dc adapter that I had laying around,I got lucky and it fit the female end on the led strip

I was recommend these from an overlock.net post for making custom LED strip lights for computers

this is a great led strip for the

The strip is extremely flexible, which makes getting the end into the connector impossible

While the light output from these is perfect and just what I needed, the adhesive strip is terrible.

The strips are easy to cut, stick very well with the adhesive backing, and if you have any soldering skills at all you can do almost anything you want with these

Best led strips if ever got beats the walmart leds I for the price I paid for these leds I would of only got maby less than half at walmart.

These LED strip produces a nice warm glow to it

I bought these LED strips from HitLights for a project involving step lighting for a customer

The 300-LED strip from three years ago had a brown backing/circuit board film

but I'm rolling with it since these strips are so cheap to replace

DOES NOT COME WITH POWER ADAPTER.It'll give you a suggestion right below the product to buy the power adapter and some connectors, make sure to grab those because they'll allow you to cut the LED strip to either save for later, or do a turn or whatever.

Good Quality LED Strip

I purchased the 12V DC 24W Cool White LED strip from Hitlights.

Tape LED strip in parallel on the metal surface

You will need it - I found this out the hard way when installing LED strip lights on my desk.

Sure, there are plenty of sources for similar LED strips cheaper than these.

I also ruined my first strip because I pulled all the backing off then tried to stick the lights.

This damaged the strip

It was very easy to snip the strip into smaller sections and very easy to solder sections together

We bought these red LED strips to run along the top of the upper cabinets after a kitchen remodel.

The strip is really too flimsy to fit under the connectors that hitlights makes.

LED strip lighting is energy efficient, easier to control (since it is a strip of light instead of a bulb that shines 60% in your face), fun to deploy (it has a sticky back that allows you to put it just about anywhere

but if you don't just pick up "Estone 10pcs Connector Adapter Cable LED PCB Strip 3528 to 3528 Single Color 8mm Free Welding" and they are a slip type fit.

The light strips are amazing but the connections are crap.

I bought the whole set-up for this LED light strip

I rated it 4 stars since one strip was acting "flaky" one morning, but has been fine since.

great for projects, this bright and vivid strip was exactly what I needed

This LED light strip is awesome

These LED strips are great.

It’s a very cute light strip

Bought a total of ten sets of these LED strips for a DIY aquarium lighting project

Light strip appears to be a quality product and it worked right out of the package (zip-lock ESD bag)

Bought a total of ten sets of these LED strips for a DIY aquarium lighting project

The warm white, LED strips are phenomenal.

I have the LED strip hooked up to a separate remote control outlet switches for easy of use

I was surprised at how cheap this LED strip was

I used the AspenTek LED Strip Connector Switch with Female DC plug for 8mm 3528 LED strip lights instead of a dimmer switch

It was the best priced warm LED light strip I could find and works very well.

I am 100% satisfied and can recommend the LED strips with no reservations

For SMD35toHitLights LED Flexible Lighting Strip Warm White, 5 Meter or 16 Ft

I was surprised at how cheap this LED strip was

The blue lights on the led flex strip is amazing and definitely bright enough for any use you can come up with

I bought the warm white strip, but the color temperature is very cool.

The lights arrived in perfect condition as expected; all LEDs functioned fine, and I was happy to find that the LED strip also came with an adhesive backing for applying to whatever surface

After reviewing Hitlights' Ribbon LED strips, reading all the reviews, and seeing just how much connectivity and adaptability these lights offered, I finally bought a set, as well as any other adapter i saw that came with them as a precaution

BUT this strip isn't at all bad

My only comments is that when you take pictures or point cameras at these strips, they ghost the strips all over the image, and, that the red strips are noticeably dimmer than the other colors

they have 600 LED strips if you simply must have or need more light.

Good Quality LED Strip

Also, I have never soldered anything in my life but was able to solder the wire to the end of the LED strips with very little pain

Purchased a number of warm white strips for various applications.

My girlfriend and I have been looking to put some over & under lighting on our main cabinets for some time, and decided to purchase the Warm White LED Light Strip by HitLights

I would recommend taking your time during the installation process, making sure the strip is taut so that no "bumps" appear

The light strips are continually falling off.

You must get this roll, the "HitLights LED PCB Strip to DC Transformer Plug Connector", the "HitLights LED PCB Strip to Strip Connector", and the "Standard Power Supply

Sure, there are plenty of sources for similar LED strips cheaper than these.

Good LED strip light.

Great warm white LED strip

The strip was easy to cut to size, allowing a cut every 3rd LED

Step by step we are switching just about everything over to LED strips and bulbs.

I tried a few LED strips from IKEA but they just weren't bright enough for my space

I soldered a pair of 18-gauge stranded copper jumper wires to connect the pair of LED strips, attached the HitLights 24 watt power supply to the pre-made power adapter end, and there was light

Nice 3M self adhesive strip on the back.

This LED strip light is very simple to install, has a pleasant warm light, and very low profile

These LED strip lights are simple to use and connect

These LED light strips are a great option for adding some under cabinet lighting accents, which we have been wanting

and again I cannot believe how bright these strips can get compared to the old school led strips I've used.

The specification include a switch my order did not come with the switch, but the strip is very bright

This LED strip is great

Really cool LED strip

Blue... pleasantly surprised at how bright the strips are.

By mixing warm and cool white strips and adding a dimmer and plastic diffuser lenses a uniform and adjustable illumination system changed the whole look of the room for a total cost of approximately $100.

I needed the strips for a current project and couldn't afford the time to return them

However, if you plan to use these lights for task lighting and especially if they will be controlled with a dimmer, you may want to consider the double density light strips with 600 LED's.

This is very nice lighting strip that I ever seen, Right now, I'm using it as a backlighting of my tv, it just look amazing

You'll need some very basic wiring and soldering skills to work with these LED strips.

These LED strip produces a nice warm glow to it

I got the idea from IKEA, They sell a set of 4, 12 or 18 inch LED strips that mount to the wall behind the TV, they look OK but did not create an even light

AS far as the light goes,they are very bright,the strip doesn't stick very good.

These LED strips certainly come close enough, but if you are picky, get a set and try before buying a bunch of them.

The strips are extremely easy to use, and the sticky tape on the back of it does a great job of grabbing onto wood (even painted wood, in my fish tank's case)

Not only can they be dimmed via remote, but they are also easy to connect together with the HitLights LED PCB Strip to Strip Connectors

I used these cool white strip lights (2 years ago) for indirect lighting in my 16' square studio apartment, with no failures so far

Great strip lights!!

I have mine mounted with LED Strip Holders that I 3d printed

Bought this LED strip to illuminate several stained glass stands which will be holding glass paper weights all of which we have created and now want to display

The adhesive strip made them as easy to install as putting on a bandaid.

I wonder if all the LED strip connectors for 8mm SMD3528 have these issues

I am going to compare with the warm white strip

Have to buy the AC adapter separately but other than that the light strip is bright and handy

Hitlights LED Red Flexible LED Ribbon Lighting Strip, 300 LEDs

Who would have guessed that totally changing the look of your room is as easy as spending 15$ on an LED strip

Good price for a working LED strip.

I installed a portion of the reel in my 8 ft Ice Shanty , the 3M adhesive strip backer on the LED strip worked great for attaching to the ceiling , the light output was exceptional .

I previously had soft white strip lights that burned out

The installation took roughly 15 minutes using a staple gun to secure the light strip to the top of my cabinets

For my purposes, I tried to the other LED light strips that are supposedly splicable, and unless you feel like busting out a magnifying glass, solder, and then hoping the solder holds the strips together forever, I suggest you get this much easier light strip to use.

BUT the sticky strip fell off 1st day

I also recommend the "6 Amp LED Power Supply for LED Strip Lighting" from Amazon to power the lights.

This is why the light strip is warm to the touch when plugged in.

These LED strips are very narrow so no bulky perimeter support is needed, just a narrow molding or sheetrock inset, heat dissipation is minimal.

16.4 Ft RGB Color Changing Kit with LED Flexible Strip, Controller + Remote and 12 Volt 4 Amp Power Supply By Ledwholesalers,

Good, basic LED light strip that should work fine for most applications.

If you are interested in getting this color LED strip, the picture featured here is pretty accurate; just bear in mind when you use these you obviously see the actual diodes

Ordered these HitLights LED strip lights to use for undercounter lighting in a new kitchen.

I'm a big fan of Hitlights LED strips and I plan to install more of them around my house to phase out traditional light bulbs where ever I can.

Well here is my 4th purchase of a Hitlights LED lighting strip and a I plan to buy even more.

one of the three LED strips i ordered was short and missing its end connection

LED Flexible Lighting Strip Warm White, 5 Meter or 16 Ft

You can use 16 gauge speaker wire to rough in for the strips behind the drywall and connect that directly to the flexible light strips.

they have 600 LED strips if you simply must have or need more light.

I'm so happy that my next project is to install White LED strips under the kitchen cabinets.

I love green color, which my eyes feel better at night, the strip also get rid of my eye strain when watching tv at night

If you need to have smaller sections, you can get: HitLights LED PCB Strip to DC Transformer Plug Connector, 2 Conductor, Any Angle Turn, For SMD3528 LED Strip Lights (4 Pcs Pack) and clip the lights in 3 LED intervals.

I used this led strip to add accent light to my truck I have it wired to my dimmer circuit and the strip is mounted under the dash

I've had the lights on for an hour and the strip is barely warmer than the surroundings.

6A 72W AC Adapter Power Supply" and the connector on the supply matched the connector at one end of the LED strip!

I ordered this LED light strip for the inside of a display case

The recently-purchased 300-LED strip came with a white, thinner

Every lighting strip I ordered worked perfectly in the color and luminance

these HitLights Warm White SMD3528 LED Light Strip - 300 LEDs, 16.4 Ft Rolls

I did notice this looks like a few pieces of LED strips spliced together, at a few of the cut lines there was already solder

The following day when I came back to the project I found the the strip had let loose in a few

I was using 16-gauge speaker wire and had to strip it down to about 22 so that the wire would fit on the ends of the LED strip (which is not a particularly safe or correct way of doing things)The

Good quality led strips with a nice warm color

I purchased a bunch of connecting and extending cables and a bunch of connection adapters, but ended up cutting plugs off of cables, stripping insulation off and soldering connection wires to the LED strips

These strips are very easy to install however the adhesive on the backs of them are not strong enough, just enough to place them temporarily

Don't just lay the strip in there and snap it shut!!

Have tried another brand of LED strip lights and have to say that the only version I can recommend is the HitLights series!

I needed a 150 watt transformer 2 output for two LED strip runs of 30 feet each

Press the LED strip firmly onto the adhesive

Led Lights StripstoInline PWM 12 Volt 2 Amp Dimmer for LED Strips with DC Jack by Ledwholesalers , 3318toHitLights LED PCB Strip to DC Transformer Plug Connector, 2 Conductor, Any Angle Turn

I connected the strip to a dimmer and it works perfectly as over cabinet accent lighting

I finally ripped out those strips and bought this LED strip to replace it.

I'll defiantly buy every color of this hitlights LED strip

Carefully place the LED strip on your adhesive strip.

If the tint doesn't bother you, then these are built just as well as the red strips I gave 5 stars.

I used these red LED strips to add some accent lighting to the footwells in my car

Have tried another brand of LED strip lights and have to say that the only version I can recommend is the HitLights series!

HIT LIGHTS HAS THE BEST LED STRIP IN TOWN STICKS THE BEST WORKS THE BEST

The LED strip light are powered by 12 volt DC, and draws 1.2 amps of current

I ordered HitLights LED strips several times a year or so ago and was very pleased with them

I ordered a warm white strip and was very happy with it, so I ordered a second

The idea there being that right angle bends may crimp the strip and disrupt the current

I would recommend this LED strip light to anyone.

If all your looking for is simple white LED strips, these work just fine and won't break the bank.

Warm White SMD3528 LED Light Strip

If you use 3207 transformer just lay out your strip and at the end remove wire from reel and attach to transformer

Unless you plan to use a solid 16' strip, you'll need to cut it down and use these PCB Strip Connectors to daisy-chain separate strips ([...

I have already recommended the light strip to others

All said and done the strips are bright and operate perfectly so far

We bought a strip of these LED lights to put around the perimeter of our closet door to get lighting in there and it worked very well

Lastly, the Blue light strip shines a real blue and not some other similar color as I've read some brands of light

After a bit of research I ordered the RED Hitlights LED strip to do a few personal projects in my car and studio.

After scaling through the many choices of led light strips i chose Hitlights because of the reviews

The strip, transformer and dimmer are available in a package here: [...

Hitlights LED Red Flexible LED Ribbon Lighting Strip, 300 LEDs, 3528 Type...

Since 5-10 meters of Hitlights' strips needs less than 24-48 watts respectvely (approx.), I've sufficiently illuminated deeper areas of my basement and under the deck with far more penetration and less energy than my bulky power strips and compact fluorescent bulbs (also 24-watts) (CFL) ever did

If you're cutting the cable and using the slip on connectors beware that they can be a bit finicky as you have to press the strip under the conductors on the connectors and the strip isn't really rigid enough to do

It is not very easy to turn sharp corners with this LED strip.

The HitLight LED lighting strip was just the solution!

Then position a small screwdriver on an angle as shown and, exerting considerable downward pressure on the strip, work the strip all the way under the connectors.

HitLights LED Flexible Lighting Strip Cool White or Bright White, 5 Meter or 16 Ft

To date, all the under cabinet lighting was too thick to hide properly and too expensive....the LED strips can be hidden very easily and will give off ample light

Any Angle LED Tape Light Strip Connector - Six Inch Strip to Strip - Single

I finally ripped out those strips and bought this LED strip to replace it.

First of all, I bought warm white strip last month and this is my second shopping

Adapter 12V 2A specifically for LED Strip lighting"

I bought 5 strips of these lights and all worked exactly as advertised!

This required cutting the strip (cut locations are clearly marked) and using two transformers (a recommended purchase by Amazon.com) to attach to the two LED strips to plug into a switch to turn on and off.

Good Quality LED Strip

I've tried so many different makers/brands of "warm white" LED strips that I've somewhat given up in my search

The Christmas lights I used prior provided a warm, soft illumination but these strips are so bright, they light up my kitchen to the point where I don't even have to turn on the regular lights.

As well, I added double-sided, sticky foam tape to the LED strip and still had to provide strip support by way of small plastic discs screwed to the cabinet underside

so I just wired up 2 - 12v 1amp adapters to each other the strips and it works fine

What finally worked very well was using yellow LED strip lighting with RF dimmers.

I'd definitely recommend this product to anyone looking for blue LED strips.

I went cheap with these and ended up almost doubling the cost of the LED strips.

LED Light Strip to the underside of a paper covered styrofome lid that was cut to size to fit a fish aquarium my

This LED strip is called "Warm White" and is listed with a color temperature of 2700k which makes it sound like you're getting that nice, yellowish, incandescent lamp look.

We can navigate the kitchen with no other light than either or both of the LED strips illuminated.

Install is easy, the back of the LED strip is glue, so just peel off the paper and press it on surface

While all the LED strips meet the description as far as LED count and spacing, the red and green had a metal structure that also serves as the wire, while the blue and white had a paper structure with traces integrated into the paper

Easy t setup and install.

The lighting is a cool, white, and I find it quite clean.