- I was a bit concerned this would not work on my 3/4" thick desk, as this is a common problem with cheaper monitor stands, but luckily this turned out not to be an issue

Only thing to remember is that it doesn't elevate your monitor as much as you might want

Its a serviceable stand, it feels sturdier than I expected and is holding up my QNIX monitor quite well

The monitor still works fine like this regardless but the screws only need a few threads past the spacers to actually work

The monitor still works fine like this regardless but the screws only need a few threads past the spacers to actually work

No worries or hesitation throwing a $500+ monitor on this thing, sturdy as a rock.

I purchased a couple of these to hang my monitors in a portrait mode, and it will not keep them vertical

This is a well made and very solid monitor stand

The only issue I these have with my monitors is the VESA mount that slides on to the arm of the stand is a bit loose.

I want to love this monitor

For years, I've been stuck with my non-adjustable monitor an only recently a friend suggested I get one of these

Monitor doesn't tilt downward like some other stands I've seen

I removed one of the horizontal bars because the arm put the monitor right in my face at my desk, but not complaining as this would probably be great for really wide desks

All-in-all this is a great monitor mount and I would highly recommend it!

It's very solid and sturdy and the monitor feels safe on it

The arm moves pretty easily to many different positions and hold my monitor steady, however you can not adjust the height of the monitor without an allen wrench

My secondary monitor is not VESA compatible, so I had to do a little modification to the monitor, bit now that I have, the stand works great

This simply cannot support a 27" monitor reliably

a must have for any compatible desk/monitor

My monitor is 13 lbs and your product supports up to 22.. is anything wrong here?

Installation or setup was really easy, the monitor feels very secure and grounded

Not a huge worry; just something to be aware of when fiddling with it!On the whole, a good sturdy monitor stand which looks rather good to

This is an AWESOME monitor mount for the price and a great way to make any desk look so much cleaner/organized/better!

You can definitely trust this thing with your expensive monitor.

Holds monitor steady, adjustment easy.

perfect for holding my new second monitor in my tight little space

I don't know why I just decided to buy an adjustable monitor arm to replace the in-built stand, but I regret not having made the purchase sooner

i searched all over the place for the right monitor mount, sure this one isn't super fancy, but it does the job (better than i thought it would

The mount itself much weight 10-15lbs, and I feel very comfortable using a monitor or any value with it.

Currently I have a 23" LG ultrathin LED monitor and the mount looks like overkill for it, but I still like the security of it

This thing is super strong and will hold any monitor no problem

(LED back-lit monitor

it's built rugged and will prob support heavier monitors than my 11lb 22 inch dell,

(Top monitor of the pic)

great monitor stand

Adjustments are not the easiest to make and getting precise monitor positioning isn’t always the easiest but that is what I expect with the value pricing of this monitor stand

More importantly, this mount is incompatible with my Asus ROG Swift monitor and probably is with any other display that has a similar pointed/peaked back - the included screws and spacers for monitors with curved backs aren't long enough.

Great monitor stand/mount

I have 27" LED monitor mounted on it.

The screws where a little long for my LED monitor

I only have a single monitor, but it feels very solid and I really trust that this product will not drop my expensive monitor.

Very sturdy, attached a 27" monitor to it without a problem

I was a bit worried that the monitor kept 'drooping' with the out of the box setup, but once you apply some effort to tightening that join, its rock solid.

Solid monitor mount

This is a classic monitor stand that works beautifully, is simple to set up, and can handle a variety of monitor adjustments.

This is a classic monitor stand that works beautifully, is simple to set up, and can handle a variety of monitor adjustments.

Decent monitor arm, but has started to sag/bend on the large post due to holding my monitor after just a month

Holds a 27" monitor very well

Monitor will fall forward if it or the desk is bumped too hard.

I'm back to searching for a mount that will do what it claims - one that allows me to easily adjust the height of the monitor, extend the monitor towards me and easily retract it back away from me as needed, tilt it up or down, and pan from left to right as needed

I have four monitors plus the laptop monitor and I love the brackets to make it wrok

I wanted a solid monitor mount and I couldn't be more pleased

I'm using this to mount a Samsung 27-Inch Curved LED-Lit Monitor S27D590C over top of a Samsung CF391 Series LC32F391FWNXZA 32" Screen LED-Lit Monitor

Bought this to support my 27" monitor, I expected the pole to be longer then what it is and thought that my monitor would be a lot higher then what it is right now, at its maximum height the monitor is only about 8" inches from the desk, I was looking for something taller and more options to adjust

This product claimed it could support a 27" 22lb monitor

I recently had to switch desks and my monitor was not as stable on the

I originally got the monitor on clearance for half price, but during a recent move it was broken during the unpacking

Amazing monitor mount especially for the price

Make sure your monitor is VESA compatible, though.

I really wanted to love this product and hoped it would end my longtime search for a budget desk mount, but I can only recommend it if you have a monitor under 10 lbs (which many thin LED monitors are these days) and don't plan to do much adjusting

This could easily support a larger monitor

I don't know how long this one will last and the sad thing is once it decides to give in I will have to either take apart this monitor and get a new back for it or just scrap the monitor altogether because the screws are stuck in there at this point

never had the arm move and my monitors have been safe on this thing since

This is a fantastic monitor stand.

Great monitor mount as long as you're not planing on moving your monitor up or down

move the actual arm and your monitor won't tilt down when you move it anymore.mine is set up stationary, so i won't swivel it around much, and my monitors are rather heavy as well

You'll still need a philips screwdriver to mount your 70/100 VESA compatible monitor, but other than that you're ready to go

Using to support my 32 inch monitor

Screen Led-Lit Monitor.

It freed up a lot of space on her desk, as she had the monitor on top of a phone book to give it added height

This is a great monitor mount for the price

Very good TV/Monitor mount

Not sure if I even feel safe putting my monitor on something that seems so weak

I like having a mounted monitor because it gives me a little more room on my somewhat small desk, so it's useful for optimizing my space.

I have my monitor in place and it works great, but I imagine the bolts would wear out (quickly) if someone was regularly adjusting their screen

Gets the job doe with reletivly easy setup, excellent build quality, and high versatility allowing to position your monitor how ever you like.

Overall great priced monitor stand.

My monitors have no noticeable sagging and the construction of the mount feels as solid as it could be

Keep in mind that for this to work, you'll need a monitor which has the mount support on the back (the rectangle with 4 screws)

Holds the monitor very stable

21:9 monitor just fine.

It keeps your monitor off your desk, thus freeing up more desk space

Supports my 24" monitor vertically quite well, relatively easy installation as well

Luckily the plate is incredibly durable and rigid that even it's outer edge surface area supports a heavy 27" monitor just fine, but I'd like to have seen something with either cutouts or some way of allowing cables to route through as intended.

This is a great heavy duty monitor stand

Bought pair of these to hang two 27" monitors including super heavy Thunderbolt

Then I bumped my monitor (with the force of say, flicking a bug off your desk) and the whole thing collapsed

Ordered a new monitor so please ignore the cord mess there haha

- holds my 24" monitor very securely - top quality construction, really glad I purchased this item; assembly was very easy to boot.

No more looking down to view my monitor and very easy to adjust or change as needed.

I use a high quality (or at least expensive) monitor stand at

Easy to install, supports even heavier monitors without the forward sinking that you'd experience from heavier displays

I love this monitor stand

I purchased these single monitor stands to free up desk space and am very pleased with them.

Must keep the screws super tight to keep everything lined up right, but otherwise a great monitor mount

I was nervous buying one of these again for my third (verticle) monitor, because the last one I bought a while ago for my dual monitor set-up had a threading issue that was a huge pain to resolve

It is a nice monitor mount stand

As long as its perfectly balanced the monitor will not rotate but a good shake can easily tilt the monitor a bit

Seriously, there's a mountain of cardboard wrapping this thing!Excellent swing arm; you need to do some hard-core bolt tightening to keep heavier monitors stable, but it works fantastically

Using it to support a dell 34" curved monitor

This monitor stand works well, but takes a bit of work to mount if your desk has any sort of supporting structure for the top within 3.5" of the edge of the desktop

The unit uses heavy gage metal and supports the the monitor with no problem

this is by far the best monitor mount if bought

28" monitors work absolutely fine.

For those that will be changing the monitor tilt or height often, consider a more expensive monitor arm.

Sometimes the monitor will be too heavy for it and the monitor will fall forward

I have noticed though that over time, my monitor (22” old Dell monitor) has caused the stand to sag slightly downwards

All the moving parts that actually support the monitor are thick metal and once tightened down stay where they are supposed to.

Had to "figure" it out which was scary especially coz we were talking about hanging a monitor

I love the extra desk space and particularly like moving my monitor off to the side when not in use.

Trust me, you won't find a better single monitor screw-to-desk support, they simply don't make a better one for the money.

Great single monitor mount

This is a very well made monitor stand with well thought out features.

No worries or hesitation throwing a $500+ monitor on this thing, sturdy as a rock.

Holds my 21:9 inch monitor very well

That is, if you grab your monitor like a steering wheel and turn it, turns so easily that cable tension can tilt it.

Very sturdy monitor stand

So many monitors, including top end monitors now come with terrible stands

I added it to my daughter's computer desk because her new monitor was leaning forward.

However, the monitor tilts/creeps forward gradually,

really nice monitor stand that I use with the QNIX 2710 27 inch monitor for playing some games in portrait mode.

all black-very sturdy-monitor tilts all the way to the ceiling, swivels 360 degrees, and tilts down a bit-very cheap with almost no compromisesCONS-no vertical hinge-need an allen wrench to move it up

recommend maximum 24 inch monitor or light 27inch monitor

I simply needed this to stay in one place, and keep a bulky monitor stand off my desk.

It puts the monitor(s) at eye level, and frees up the surface of the desk, so the appearance is much neater.

I have a 20 monitor with TV built in so its hefty

Does well for what I was looking for - getting my monitor in a better position and freeing up some desk space.

:The matte metal finish of the tube is gorgeous to look at, and compliments most modern monitors for a very cohesive setup

The photos show the top monitor with the bracket in use.

I only have one issue with these, which are being used to hold two vertically positioned Dell U2412M monitors in position - the accessories for cable management are flimsy

Why would you want your ugly monitor stand to stand out on your desk

Great monitor mount

Basically, the monitor just "sinks" forward constantly due to the weight

Pros:- Holds my monitor in

Excellent Single Monitor Stand

You just have to look at the weight to see if your monitor's weight fall below the maximum weight that this mount can handle.

This simply cannot support a 27" monitor reliably

VS238H-P 23-Inch Full-HD LED-Lit LCD Monitor

And in the dark it looks like your monitor is floating

I am hanging a 34" ultrawide monitor on mine and to doesn't even care

helps steady the monitor while you screw it in

This is a great monitor mount, except for the fact that the range of motion is less than I was hoping for/expecting

This is a great monitor stand

I also have a similarly priced "Monoprice 3-Way Adjustable Tilting Monitor Desk Mount ", and the VIVO mount is MUCH better quality - better designed, better built, more stable, easier to adjust, more adjustment range.

The height can be set at install, but you can't move the monitor up and down while working like some of the more expense spring loaded mounts.

Nice, sturdy monitor desk mount stand.

All in all I recommend if you are looking for a cheap monitor mount.

This is a good monitor arm

The result - ROCK SOLID mount and very stable monitor positioning.

The joint still bends and the whole thing works flawlessly, even if it isn't the Most easily adjustable monitor mount ever, but for its price it's amazing.

The older one that I purchased last year measures at 17 1/2", the center monitor mount pole measures at 16 9/16" and the far right monitor mount pole measures at barely 16 1/4"

It solidly holds the monitor steady without the monitor's weight (within the limits) causing it to sag at an angle.

Monitor is stable enough to use adjustment buttons on the front of the monitor without too much movement, even fully extended

Couldn't tighten one friction bolt enough to hold the monitor from flopping and hanging face down(ish)

Fantastic monitor mounting

The tubing and hardware easily holds modern 21" monitors (might holder larger ones; mine is 21")

I ordered two of these to mount my twin LG 27" LED monitors

Monitor will fall forward if it or the desk is bumped too hard.

If your desk has a lot of depth like mine does, this thing is a must, because it allows you to bring the monitor closer to your eyes without having to have a traditional monitor stand sitting smack in the middle of the desk

This is an incredibly well built, sturdy monitor arm

Finally a great, solid, and clean aesthetics monitor arm