Color:Receiver（built-in battery） Latest design wireless DMX512 receiver have a built-in rechargeable battery and the battery is renewable

After a full battery charge time about 2 hours,, sustainable work about 8 hours

Users also can use the product while charging.Specification:2.4G wireless DMX512 R/T 7 groups ID code settable, User can use 7 groups individual wireless net without any interfere

Input voltage: 5VDC 500mA MIN Communication distance: 400M (visible distance) Max transmitting power rate: 20dBm Receiver Sensitivity: -94dBm CPU: 32-bit ARM Core Modulation: GFSK DMX Signal Interface: RS485 Operating temperature: -40 ~ 85 °C,Storage Temperature: -65 ~ 150 °CAmbient Relative Humidity: 5 to 95% (non-condensing) Automatic Reboot Trigger: Built-in WDT (watchdog timer) Operating manual1

Press momentary switch above the side led indicator to indicate ID setting 2

Press again to set IC,to the color ID desired, adding 1 each time you press the switch will advance the color ID code

3

Working condition: LED constant lit up:No DMX or wireless signal

Red LED flash:Transmitting Green LED flash:receiving Establishing Communication: 1

Power on DMX512 wireless received board first and then following to power up the transmitted boards

2

Press "Key" button to set same ID value of transmitted board and received board

Please use different ID value if you need use more than 1 group wireless universals at same time in same place

3

The red LED flashes when transmitter transmits DMX data by no interfered frequency section, then receiver changes communicated frequency section

Green LED flash till received corrected same ID value, LED flash more fast once DMX data more fast.Package included:1 x DMX512 Wireless Receiver (built-in battery）