Out of all the XLR type cables I bought, they are not made right, and your bound to have a wire disconnected in the cable, so you have to solder the wires back in, but this, after taking it apart to take a look at it, it is molded after soldered, and well built
This feels like a very durable cable built to last!5 stars
Good construction with soldered connections and excellent strain relief, metal connectors and good rugged cable with dead silent shielding, usually not what you find when searching the bottom of the price range and one of those "finds" you get on Amazon that put a smile on your face.
In my studio these are being used to drive my monitors and will soon be used from my rack eleven to my RME UFX.***Update***Okay, so now I've bought 3 sets (that's 6) of these awesome cords
A couple more notable features that I like are the fat-gauge cord, and the black-chrome plug hardware
They add a really classy cosmetic touch to these already impressive cords
I do check all my cords and cables and these work just fine.
when i cut on the record button to catch audio it only catches the cord like how retarded is that
Like many other connectors, both expensive and cheap, this connector had an electrical open, (opposite of a short), which meant that my microphone cut in and out
These cables have nice connectors to them and seem like a very high quality build.
Like many other connectors, both expensive and cheap, this connector had an electrical open, (opposite of a short), which meant that my microphone cut in and out
I opened the bad section of cable and it has the 2 inner wires, black and white coated, plus the bare copper shielding
I opened the bad section of cable and it has the 2 inner wires, black and white coated, plus the bare copper shielding
I put a meter on one end and cut 12" off one section at a time until the short was gone so I could locate the bad section
I put a meter on one end and cut 12" off one section at a time until the short was gone so I could locate the bad section
You are reading snippets from reviews of Monoprice 104768 3-Feet Premier Series XLR Female to 1/4-Inch TRS Male 16AWG Cable
More about Monoprice 104768 3-Feet Premier Series XLR Female to 1/4-Inch TRS Male 16AWG Cable
Size:3ft
|
Style:Premier Series
Monoprice's line of Professional Audio cables brings you high performance cables at rock bottom prices
Whether you're connecting broadcast equipment instruments for your band or your high end entertainment system Monoprice has the interconnect cables for you
Balanced audio cables utilize impedance balanced lines that reduce EM and RF noise and extend the effective range of the cable run
Additionally unlike standard unbalanced RCA interconnects that utilizes their braid as a signal return balanced cables have a separate braided shield to provide additional resistance to interference without modulating the interference into the signal
This prevents ground loop issues
XLR to 1/4" TRS balanced pro audio cables provide high fidelity and eliminate noise in the recording studio and on the stage
Our new Premier Series cables up the ante in terms of construction quality and performance.