Morley ABY Selector Combiner Routing & Switching Device - 2024 report by Whydis
Morley ABY Selector Combiner Routing & Switching Device
The ABY footswitch can be used to solve any number of complex audio switching problems. Use it to switch one input signal to either or both outputs, or it can also be used in the opposite direction. Route one signal to two outputs or two inputs to on...
If you are switching between amplifiers, you can find better solutions that will potentially be more noise-free, and potentially safer, but they cost more money
this solution is pretty much ideal and works very well
this solution is pretty much ideal and works very well
You are reading snippets from reviews of Morley ABY Selector Combiner Routing & Switching Device
It works as it should, seems like it has solid construction, and keeps signal noise to a minimum.
MY APPLICATIONI wanted to use this with a DRRI, (two channel inputs) and put an overdrive or high gain Distortion pedal on channel 1, leaving the reverb and speed/intensity to the clean channel 2
a clean channel and dirty channel.
However, when the overdrive is turned on, but the AB is switched to the clean channel, you get a lot of bleed through of the noise inherent from that high gain
Boss AB-2)- 9V Power supply jack of the "standard" variety used on a majority of pedalsCONs- Allows bleedthrough of noise from one channel to the other (for instance a high gain pedal on B may bleed noise through to A if the pedal is not turned off)- No ability to change phase - can be a problem if using a Fender 2 channel amp like DRRI with inputs out of phase, or two amps with inputs out of
- Using with a MiniBrute Synth - on one side a pure signal on the other side I'm running a Zoom G1on effects processor and needed a way to get a pure sound out of the Brute as well as either a processed sound or
Also since the inputs on the DRRI are out of phase, the combined signal is a little odd sounding
Use this for two amps(one clean & one dirty) for a great sound
: When fed directly into a DI box (no phantom power), there is no audible sound when switching between guitars.