-
If it isn't, I'll come back and say so.[/STRIKE]Surface prep fluid works like a charm to get last of greasy smears off the metal prior to applying the heat transfer medium
-
Best pair of liquids for cleaning the top surface of the CPU, and the cooler that is going to keep it cool
-
And it just underscores the sensitivity of the matter when it comes to properly preparing a surface and cleaning it before applying thermal paste.
-
I used it to wipe away all of the old thermal paste and it really gave me a clean surface to work with
-
The surfaces are VERY CLEAN after the 1 + 2 combination, and you are left with an extremely pleasant scent for your heatsink + cpu surfaces
-
I use Q tips and this combo is perfect and leaves and shockingly clean surface which is always preferred as the starting point for new thermal compounds.
-
a must have to clean surfaces for new thermal paste.
-
Left the surfaces nice and shiny for the new coat of diamond grease.
-
I used to use alcohol to clean contact surfaces, but never again
-
It leaves a very clean surface, so the thermal paste get a good contact on both surfaces.
-
This kit includes the remover and the cleaner surface.
-
and it just like a new surface.
-
It's cheap and works great, I really recommend it for cleaning the CPU/GPU surface before reapplying new thermal paste.
-
As far as cleaning/removing thermal compounds it works well, I actually use it to clean other electronic surfaces as well, such as when removing cell phone adhesive before replacing it.
-
It worked quickly to clean up the contact surfaces of my i5-2500k and a Cooler Master heat sink, and I have plenty left over.
-
I needed to clean this surface to re-apply the thermal compound.
-
Let it sit for a minute or two and wipe the surface clean
-
It really takes the old grease off and leaves a shiny surface ready for the new stuff
-
Don't be afraid that you need a perfectly clean surface with the white cap before switching over to the blue cap bottle
-
Once all was done, I had a perfectly clean CPU surface and a perfectly clean heatsink, which I used Arctic Silver 5 to reattach.
-
Cleans and purifies the surface of the CPU and GPU for thermal paste application
-
Takes old thermal compound right off and leaves the surface with a mirror shine, ready to accept new compound.
-
Great little kit that leaves absolutely zero residue, creating a perfect surface for thermal paste
-
It smelled great (very citrus-y) and took off the remaining compound after several light wipes with the cloth (folding it a few times to use a clean cloth surface throughout)
-
The ArctiClean kit works perfect to clean and purify the surface for heatsink installation
-
This is the only game in town if you want to properly clean your mounting surfaces before applying/reapplying thermal paste to your CPU and heatsink.
-
Just make sure you use a non-lint cloth to wipe the old away and clean the surface of the CPU
-
no 1 bottle cleans the thermal compound and no 2 bottle cleans up the surface really nice
-
Remove impurities and clean the surface so deep
-
This stuff did a good job of helping to get that cleaned up, and the surfaces I prepared for the reapply seemed shinier than normal.
-
Did as instructed and i was amazed when i had a shiny surface.
-
Cleaned surfaces well and made cleaning the processor easier for someone not as versed in how to do it
-
Step 2 purifies it and leaves it super clean and shiny; making it a much more effective surface to transfer heat.
-
this kit is a good price on the pair of overpriced surface degreaser and cleaner 'kit'.
-
The surface looks much cleaner and is easier to clean as well
-
these items clean and prepare surfaces very well and are a small size, handy for someone to carry around with them
-
Solution number 2 cleans off the first solution and cleans up the surface rather nice.
-
Do the same with the second solution and you'll end up with a shiny clean surface to apply some real thermal paste onto and you're done
-
This stuff cleans the surface so it looks brand
-
This thermal paste is no joke and does a great job removing the old gunk and cleaning the surface for the next application.
-
Does a great job of creating a clean surface for thermal paste.
-
Left a perfectly clean residue free surface for a new coating of thermal insulator.
-
this stuff worked well on cleaning compound from my CPU, but about just as good as
-
just make sure you clean ur thermal compound as much as you can before dropping no 1 bottle
-
There seem to be a lot of home remedies for cleaning a