Well after powering down this router and my modem it took about 30 min before the this router started working again.2nd problem-was straightening up the wires behind my entertainment unit and had to unplug the router-took and hour for it to reboot correctly after at least disconnecting and powering down the modem-5 times.3rd problem-today, 4/22/18 woke up, turned on the computer and wifi from this router not working.

It started dropping wi-fi and slowing wired connections again

Crazy fast (wired and wireless (5Ghz) and decent admin software.

Even in my home office where I had to run a hard wire and setup a switch and 2nd wifi router to handle traffic.

Fast on every level, wired and wireless, with wired obviously speedier.

And that is just about the same as I get hard-wired

one last thing i will say is if you never ran a switch before and are stuck placing your router close to a pc or xbox to hard wire all your stuff give a switch a try i ordered 2 15 feet cables set my router on the dresser close to the middle of the house and then set my switch up by the tv with all my stuff i wanted to hard wire ,it looks so much cleaner

Hard wire stayed connected and running all the time and never lost connectivity to Internet or router.

If you're hard wired to the

Enabling Any of these combinations causes all wired and wireless devices to lose connection to the internet

Of course I get to hard-wired with many devices and probably get better speed

, i also bought a linksys 8 port switch and was going to hard wire a bunch of my

Wireless works as well as wired devices

No biggy I am running cat5e to my office from the router so that I have hard wire to router for my gaming cpu

Devices such as my laptop can still obtain the internet if hard wired to the router

I have a lot hooked up to this both hard wired and

Crazy fast (wired and wireless (5Ghz) and decent admin software.

Well after powering down this router and my modem it took about 30 min before the this router started working again.2nd problem-was straightening up the wires behind my entertainment unit and had to unplug the router-took and hour for it to reboot correctly after at least disconnecting and powering down the modem-5 times.3rd problem-today, 4/22/18 woke up, turned on the computer and wifi from this router not working.

Later that evening I noticed I couldn’t even see a 2.4 signal and when I went into the router the only connections were hard wired.

It now reaches every nook and cranny of my home, and this single unit handles four unmanaged switches and 35 devices (about 20 hard-wired Ethernet, the rest wireless) without breaking a sweat.

Ethernet, as if a totally hard-wired home is a realistic typical scenario for the home users this service is primarily advertised to and aimed at

I want to take advantage of these hard-wired Cat 5e cables, especially the original router going to be plugged in in garage

I have around 32 devices connected to wifi, and a couple of hard wired devices.

I could smell burnt electrical wiring/components (you know the smell if you've had something fry before)

I have removed the stand alone access point in the basement and have even thought of removing the powerline setup in my work shop except I might need a hard wire Ethernet in the future out there and the powerline module has a Ethernet port on it

He had me print to the printer while hard wired to the router and it printed fine

love the extra ports for hard wire connect!

My main concerns are the hard-wired connection for my main system (Alienware Area 51 Desktop), my wife's PC in the other room, her Kindle and my Note 8 mobile device.

, i so mad dont even want to replace it