Something inside is rattling that sounds like a loose wire or cable in all of them, again not really affecting the lights performance, just when you are installing themI bought these not really expecting

Hard wire connections are not long enough to really use (maybe 5 inches) but I took the long connecting cord and cut it in half and used it instead

Will now have to hard wire which will take time I do not have

Very easy to install and everything you need to hook up how ever you choose...end to end, chained, hard wired and standard plug with switch.

I do have plans to hard wire when I have some spare time but at the moment I have two strands of 5 fixtures to two separate outlets

Longer wires are available separately, but a few can be fabricated with the included stub connectors and some 3 conductor cable you supply.

The ability to daisy chain, direct connect, hardwire, soft wire allows for easy installation in any application

Only to complaints are the length of the hard wire leads, really need to be 12 inches not 6

Easy to hang, wiring is easy, and extremely bright.

My case required extending the length of come of the cables, or hard wiring the light directly to a wall switch, but I found the connecters and other thing supplied to be very useful and easy to deal with

The supplied hard wiring leads were ridiculously short, so I ended up cutting the daisy chain cords for supply leads.

The linking will enable me to plug them into the adjacent room, giving me the light needed to finish the hard wiring

A pigtail for connecting into a hard wired installation, or a 2' cord for connecting two or more lights together, and a switched cord with a 3 prong plug

The only issue I had was the wire they include to wire them up to a switch is way too

Two things that the manufacture can improve on are mounting brackets are weak and the hard wire needs to be longer.

The wires are pretty thin, not like heavy duty or anything

so I can’t address the hard-wired option

for hard wire them in I’d preferred they would have came with heavier gauge wire .... but this is money well spent in very happy with my purchase

Plug options were good, I had to buy some plugs and install onto the supplied hard wire stubs, but only because I wanted a neater look than bundled up wires (I installed 18 outlets on 3 separate switches on a new construction)

Bright light, easy to install and very adequate wiring attachments that allows for great flexibility to adapt to your particular installation.

wish for hard wires to be a bit longer

This hard wire lead is wayyyyy too short.

I was looking for something bright, low profile and that could be hard wired to light switches instead of needing to be plugged in

The 5 foot power cord has standard wire colors, green (ground), white (hot) and black (neutral).Now regarding the brightness.

The mounting clips are extremely cheap, and the wires are really wimpy, like 20Ga or something

When lights are on, openers that are not hard wired will not work.

The mounting clips are extremely cheap, and the wires are really wimpy, like 20Ga or something

Since I got to keep the defective one from my first and only purchase I decided to open it up and see what the issue was, found out that one of the positive wires going to the LED strips was pinched in between the plastic end caps and the aluminium frame (probably happened when the lights was assembled), causing it to ground off and shorted out the driver

The short direct wire option has some unusual colored wires in it, yellow with a green stripe (ground), brown (hot) and blue (neutral).