Good price on a decent bit in a somewhat hard-to-find size (39/64").

Good price and fast shipping and cut quality was good enough for my application

This bit did exactly what I needed it to do for a decent price.

The bit seems fine, and the price was good, but labeling (on Amazon) could be better.

Good price and fast shipping and cut quality was good enough for my application

I have drilled three holes so far and the bit is still just as sharp as it was when it came out of the package

Great value for my purposes: large oddball sized drillbit with a 3/8" shank for slow boring one precise hole in aluminum casting at low rpm with small rechargeable drill in an awkward location

Exactly what I needed for my project, good quality, nicely packaged, great value.

Good price and fast shipping and cut quality was good enough for my application

Fast shipping, quality product that worked its way through 1/4 steel steadily and effectively.

Clean cut that I then tapped 3/8x18 npt

good cutting bit but had a bad wobble to it

Not very sharp...didn't even cut wood very well

Nice clean cut

Do that, and dribble plenty of oil on the hole as you drill, and this modestly priced drill bit does a very clean cut.

It does a great job

Did a great job on drilling the

Good price,came quickly and did a great job for me.

Did great job .

Does a great job.

worked perfect for drilling up to size holes in a bass headstock...

I make Driftwood Wine Racks and this Drill bit works perfect as the necks of the bottles fit in great

3 and 1 worked good.

Excellent worked perfectly.

Great quality, hard to find tool

Poor quality, bent on first use.

Poor quality control.

I believe it was poor quality.

Drill bit was great quality and worked very well for what I needed it for.

so I used this drill to oversize the hole and insert a new bushing from local hardware store.

Do these pictures look like how a drill bit should behave in a portable drill Chuck?

A good drill bit for pen making and other wood products.

was not able to finish my first hole and the drill was dull

I do not expect the drill or the drill press to be rigid enough to directly give me the hole I want

Didn't make it 1/16th inch in to soft A36 steel with a pilot hole drilled in it despite three attempts at resharpening

Ripped though 1/4 inch mild steel very well!

Nice steel poor finishing and quality control.

Car frames are by no means hardened steel, the bit (or a good bit) should have went through them like butter

Did the job on 1/32" stainless steel, after a pilot hole, but does show signs of wear after one use

Works as expected

Product didn’t work as expected.

Works as expected.

great price for this tool, works as expected

What to make a bad product and stamp "made in America" on it

I used it once in a broken half he might be a good product I was making a small hole in to a larger hole that have something to do with

Good product, precisely the size I needed for a very specific task

I drilled 12 holes in 1/2 inch iron, in my huge drill, it worked 100 percent, it stopped the drill a couple times, but it did not break or get dull, very good product.

Product didn’t work as expected.

I just needed to finish drill two odd size holes in mild steel for tapping and even pre-drilled the hole out to 7/8"

worked great, I needed this exact size and the bit worked great

These odd size bits are impossible to find at Home Depot or Lowes

This made the correct hole size that i used to "tap" threading.

Good product, precisely the size I needed for a very specific task

Don't waste your money

Absolute garbage, don’t waste your money

Good looking bit, shame to waste all that craftsmanship, and my money, on such a sorry piece of core metal ! ! !

Well worth the money.

Don't waste your money!!!

Using a battery drill and the bit got in a slight bind, broke in half.

Even after boring a hole with a 3/4 inch bit, this bit could not enlarge the hole.

The bit wasn't that sharp, and it was a little off balance, but it worked

The bit dulled quickly while using it on a project to drill two holes in a steel bumper

The bit seems fine, and the price was good, but labeling (on Amazon) could be better.