-
The last straw was replacing the black ink with EPSON BRAND ink only to have two cartridges fail, and "clean print head" ineffective with remedying the problem
-
It uses ink to clean the heads, a lot of ink
-
Clean the heads
-
It refused to spit out ink no matter how many times you cleaned the head and did a test print
-
Worked good for around 3 months, but used ink way too fast, then the Magenta would print with lines, then it quit, cleaned the heads, lasted two days, cleaned out the feed tubes, worked for a week, now nothing, then the cyan is now playing up, in 8 months its been a total pain, poor print quality, poor wi-fi and paper jams, this is the 2nd Epson out of the three I bought, that's been thrown out
-
these printers the heads are like impossible to
-
While doing some research I repeatedly cleaned the ink head (6 times to be exact)
-
Purchased several new ink cartridges and cleaned the print head MANY times to no avail.
-
The problem was dirty printer head
-
Usually prints blank unless you go through multiple steps to clean head.
-
Tried all the maintenance suggested (cleaning print head, aligning print head etc.).
-
I would try to clean the heads with the option and every time I did it seemed to help a tiny bit but used up SOOOO much ink I could not continue with
-
I have cleaned and cleaned the print heads.
-
So I did a nozzle cleaning, head cleaning, head alignment, changed all of the cartridges, and did it all again
-
Prints vertical lines though my photos even with new ink and cleaned heads.
-
I even cleaned the heads again and again
-
Every 4th or 5th document that I printed had skipped lines, requiring me to go through the procedure of aligning/cleaning the ink printer heads.
-
I've tried over and over to clean the heads, tried troubleshooting from forums online, etc
-
The print head clogs and dries out quickly.
-
(I'm relatively tech savvy and it was not easy for me)-I've never had to clean print heads so many times!
-
I have cleaned the print heads, changed ink and blah blah blah
-
It used the ink up in all 4 new cartridges and still didn't completely clean the print head.
-
I replaced all four color cartridges and cleaned the print head.
-
I've had this printer for our office for about a year, sure, I guess I have saved money on ink, however the amount of time wasted going and turning it on and off, refreshing it, trying again, cleaning the print head... it simply is a piece of crap
-
Inkjets clogged and even after multiple times trying to clean the heads and using up nearly full new ink cartridges, it still wouldn't print a decent picture after just 4 months of use
-
Did not print as fast as in the video very disappointing
-
easy to set up but made with very cheesy plastic, everything worked except the automatic feeder, it didn't work at all, had to had feed one sheet at a time, returned it, it just doesn't work as it is supposed to
-
Good as it says,but printing on color is still kinda slow for me -_-