-
fyi remember to remove the thin protective film covering on the shield
-
A "cloudy" protective film must be removed on the front AND back of the shield.
-
The shields are opaque when they come because they have a very thin protective plastic film over both sides
-
Thank goodness for the reviewer who explained you have to remove the thin, clear film covering on both sides of the shield.
-
It cam out of the box with a cloudy film covering it.
-
Instructions tell you that there is a protective film on both sides of shield.
-
There is a film on both sides to protect the plastic film from scrathces before it is used, but the way the shields are packaged causes the bottom plastic flim to become scratched
-
The description neglects to mention there is a thin plastic protective film on both sides of the shield
-
This product has a protective film on both sides of the material.
-
You look like a fool, but you're a fool who can enjoy oxygen unlike your mask wearing counterpartsNotes:- Remove the protective film from the visor before use, otherwise vision will be opaque
-
After I removed the protective film on all three plastic pieces, they were still far from sheer
-
A "cloudy" protective film must be removed on the front AND back of the shield.
-
Super comfortable, light weight, clear view after the protective film on both sides removed
-
After taking of the protective film in both sides you'll have a clear shield
-
Do not forget to take the protective film off
-
Although they are very hard to see, I finally was able to slightly crinkle the protective films on both sides of the shield.
-
The item came in a package that through the shipping process caused the film to be scratched which was the way I found out about the protective film
-
I have never written a negative review, but these were cloudy (yes I removed protective film
-
once I got BOTH clear films off.
-
Note: There's a sticker on the shields that say: " we SHOULD PASTE a protective film on both sides of the lens, and then remove it before use."The sticker should say, THERE IS a protective film on lens/shield
-
(Some other types of shields include stickers that id the protective films and help get them off.
-
Like other reviewers have said, there is a protective film on BOTH sides of the face shield, once that was removed this mask is very easy to see through
-
There is a protective film on both sides of shield that you have to remove.
-
The item came in a package that through the shipping process caused the film to be scratched which was the way I found out about the protective film
-
Due to the seller reaching out, I now know there is a protective film on the lens