The actual arm itself is very good and works well, and where you mount your mic is built well and has 3-4 options for mounting a microphone

I hung this arm from the top portion of my desk furniture, and it didn't really occur to me to use the springs in order to prop the boom arm at an upwards angle

the pop filter blocks plosives and the mic arm is good

So I needed the arm the most, and the arm itself is fantastic

You will find the arm becoming loose sooner rather than later EDIT: customer service saw my review and emailed me offering me a refund or an exchange for an upgraded arm

Great arm that is very

The arm with the mic and pop sleeve cover are perfect

I did adjust the arm springs to the "stronger" tension hole on the boom arm (very simple, easy to do...see 3rd image) just in case my Yeti was a strain on the joints later

Arm broke within a month

so the arms sags essentially, limiting the actual position of the mic

The popper stopper is pretty decent but the arm is kinda flimsy.

My sound engineer friend was wondering how I got a better boom arm than him

Don't be cheap like me and get a more expensive and better quality micerophone arm

This boom arm is a great boom arm, the only problem is that the shock mount does not support the Blue Yeti despite it saying it does.

Worst arm I’ve seen

The arm and the mic cover are amazing and do exactly as intended, the only downside is the pop filter doesn’t always stay in position but is definitely able to be jerry rugged into position.

The arm was flimsy and it

The Arm is not strong enough to hold a yeti microphone up and mine fell after a day, I tightened it as hard as possible yet it still fell

The foam cover was not for my blue snowball but the arm was excellent, as expected.

It's a GREAT arm to start off with

The arm stays out but kinda difficult to line it up exactly right

I attached it to the top of the stand and used the flexible arm to bring it in front of the mic just like the picture shows

Really big gripe is that the arm really is bad

Super cheap the pop filter is garbage the arm is very weak waste of money

The arm can bear the weight of my microphone, Fifine K678, without droop/sag

- The arm is fantastic

The problem with the pop screen is the flexible arm.

This microphone arm is fantastic

It works well though and for the money it's a solid bargain mic arm.

Very good mic arm... however the "quality" is a bit lower end compared to others on the market.

Other than that, I like the boom arm.

My arm is sturdy and his starts to dip from the weight of the mic and pop filter, his words

The arm itself holds up well, I've attached a Blue Yeti microphone to it and unlike what I've read in other reviews the threads that it comes with works perfectly with that mic

The only thing that may be a drawback is the plastic knobs but overall, for the money, this is the best arm for your mic

Other than that, the arm is good for the money

The flexible arm for it is not strong enough.

The flexible arm for it is not strong enough.

Very sturdy will hold the arm up even when flexed all the way out.

This isn't a very sturdy nor reliable arm, its flimsy and doesn't stay in place

The arm was great though and the threads weren't stripped, so that's also a win

If you want to get a shock mount then you'll probably need to take a trip to a hardware store to pick one up but this arm is stable

The problem with the pop screen is the flexible arm.

Great Microphone Arm

So I recently revived this boom arm

It also doesn't require body-builder strength to extend/move the arm like my last scissor arm

The Arm is not strong enough to hold a yeti microphone up and mine fell after a day, I tightened it as hard as possible yet it still fell

On a side note, my friend also purchased this exact same arm earlier than me, and his arm is silent on movement.

I'd recommend it to anyone looking for a cheap microphone arm that can do the basics and get the job done, but I'd also recommend upgrading to a better one eventually as you find out it's limitations and seek to expand and eliminate them for convenience, namely range of movement and ease of repositioning comes to mind

But, the pop filter's arm is really cheap and can hardly hold up the screen, which is my biggest complaint.

This arm broke after a few months

The arm has the perfect stiffness setting for the razer

Can you get a better quality arm with more adjustments

We put this arm by a piano for hands free mic play... perfect and stable

Nice to see how I like having a mic arm but if you already know you like it, get something more worthwhile.

Great budget boom arm

I would recommend this to anyone looking for a sturdy mic arm with a clamp

The arm vibrates easily and makes the mic catch many unwanted noises, like my computer's fan

This arm is easy to assemble and use

I haven't been able to notice much of a sound-quality difference with the products installed, but the arm is helpful and they certainly didn't hurt the quality either.

I'm very satisfied with this Scissor Arm Mic Stand from InnoGear

Amazing robot arm for microphone for a great bargain

Love this adjustable arm

This arm works great with my Blue snowball microphone

Not the strongest mic arm for a Blue Yeti, but also not very expensive and confess with 2 pop filters, can't beat that!

and then the pop filter flexible arm is not strong enough to hold itself at many angles

and then the pop filter flexible arm is not strong enough to hold itself at many angles

Despite my unorthodox mounting option, this is definitely a good quality and inexpensive mounting arm

Also, the arm shakes quite a bit when you move it.

Everything looked great, the arm seemed sturdy, but the brass fitting...the most important part of the whole thing did not fit into the blue yeti microphone, even with the tape, i went to homedepot to try and find something that would

Easy to set up, clamps firmly to my desk, arm holds position nicely, and fit my Blue Snowball perfectly

Other than that it’s a great arm and great pop filter

Great arm, adjustable, fits different mics, works great for streamers

The arm itself is fantastic

Adjustable arm has tons of angles/length to be adjusted to your liking

This arm works great

Don’t buy this, the arm is very weak and so is the pop fillter

Even when paired with the "AUPHONIX PRO Blue Yeti Shock Mount" this arm picks up significant vibrations from the desk and carries them to the microphone

Arm is also sturdy and doesn’t buckle with weigh of mic, but also not difficult to adjust/move around

It's certainly not the best arm on the market, but it's priced right for anyone who wants to get their mic up on an arm.

It worked relatively good for a bit, but the mic arm's connector to the desk was way to weak, and the screw that is meant to keep the arm steady, constantly got loose

4 stars because the arm is sturdy and this set was muuuuch cheaper than anything else online (especially when buying pieces separately).Not 5 because the quality of the accessories is obviously cheap, but!

Great boom arm

The arm kept leaning

The arm is great since it can move and do everything a normal arm can do, the accessories are quite cheap but for the price it is great, the quality of the material is amazing but one screw cannot fully tighten and it still moves if slightly knocked.

The arm itself is very adjustable and easy to maneuver

I probably would go with a more sturdy arm.

The arm didn't feel that sturdy at first but it hasn't really moved despite my shaking of the table over the past few months

The arm very sturdy made with good material from the base all the way to mic holder

The problem is that the arm is far too weak so it is difficult to keep it in position no matter how it is moved

Do you want to pay the money for an expensive mic arm

Arm is made of thin metal and strips kind of easy you have to be gentle and don’t tighten too much or I tighten and retighten a lot

No matter how hard I tightened every screw, the arm would lean down

Only thing I didn’t like was the none sturdiness of the pop filter the arm itself is sturdy

the pop filter for the mic as well as the external pop filter were great additions, plus the actual mic arm is very durable.

The arm is sturdy but does allow for some noise to come through.

Arm and cover is great but the clip filter is very cheap and flimsy

But, no matter how tight I make it, the arm falls off my desk

The Pop filter doesn’t attach to anything, and even if you can get it on something, the arm for it just goes limp and drops down uselessly

However the company offered me a refund, and at least the arm itself behaves very well

The arm is adjustable in various parts, making finding the perfect spot for your mic very easy

I've used it while streaming to ensure my viewers get my full voice whenever I speak, and the arm is easy to both setup and adjust making it a breeze to move out of the camera if needed

The actual arm itself is very good and works well, and where you mount your mic is built well and has 3-4 options for mounting a microphone

It was good just not a super good range of motion and not as strong as I'd like

Works as it should no issues

Works exactly as I need it to

Work as for i need it

Doesn’t fit the Blue Nano mic as well as it could, but a great value for the price

It works as it should.

is i have any issues, but as of now its perfect!

works as it should x)

It works as it was intended to

Overall, sketchy as