-
If you need stick the strip lights to other surface, you should clear the surface and keep it very smooth and dry, otherwise it maybe fall off
-
Just clean the surface with PVC primer or rubbing alcohol prior to applying sticky back strip.
-
mounted on clean surface except at the edge where the wires are connected so I hot glue it (high temp glue stick)
-
The strip has an adhesive backing that works well on a smooth surface
-
Installation was easy, with an adhesive backing that sticks well to most clean, smooth surfaces
-
The adhesive strength varies a bit and like all adhesives, work best on a smooth flat surface.
-
Clean the surface VERY well
-
This tape does NOT stick to rough and/or dirty surfaces
-
If you need stick the strip lights to other surface, you should clear the surface and keep it very smooth and dry, otherwise it maybe fall off
-
Clean the surface VERY well
-
The double sided tape is marginal for affixing to anything but perfectly smooth, flat, non porous surface
-
Painted surfaces that are smooth and rigid tend to allow this type of adhesive to stick well, as well as smooth metal surfaces like aluminum
-
I have used several types of LED’s over the years and was not impressed by these
-
It has no hints of blue like the “white” LED’s have
-
These are as good as or better than similar strips sold in the big box stores at many times the price
-
I have been using these to upgrade florescent fixtures as they fail.