-
I would rate these as really good quality LEDs.
-
Be aware of finicky leds.
-
The first sign was the leds would start to flicker and the leds would dim
-
After running for several hours the LEDs are warm to the touch but not hot
-
These LEDs are not warm
-
It worked perfectly for about 2.5 months then I noticed that the LEDs were slowly becoming dimmer.
-
As a result, they tend to break themselves or damage your LEDs pretty soon
-
My test strip was on 24/7 and hooked up, 3 LEDs have burnt out since
-
More than three times as bright as 5050 LEDs.
-
Very bright leds and easy to work with.
-
Plus, the 5630 LEDs are incredibly bright
-
LEDs are reasonably bright.
-
After only four months of occasional use, the LEDs have turned VERY yellow and have dimmed (originally white daylight).
-
The LEDs are nice, but the glue is not as sticky as I expected
-
Leds were able to be re-stuck to the surface before but have completely fallen and will not stick anymore rendering these LEDs useless unless i buy some adhesive of my own to adhere them to the location again.
-
These LEDs are as bright if not brighter than the florescent bulbs that they replaced.
-
LEDs itself are fine, but the strips have issues in my opinion
-
The 5630 leds are so much brighter than the others I have bought
-
It seems people may like the LEDs, but the power supply is junk
-
We don't need "true" colors in our closets and the somewhat harsh blue light of the cooler/these LEDs are not nice to walk in after you just woke up a few minutes ago
-
They aren't the brightest LEDs you can
-
We used the pure white leds as under-cabinet lighting in our kitchen
-
UNBELIEVABLY bright LEDs
-
After 2 weeks of continuous (for testing), 2 LEDs seem to deteriorated.
-
If they're on a lower-gauge wire for a few feet or more, and if your battery gets lower (like I said, below 12.5v or so) somewhat regularly, then the little LEDs themselves start to die off.
-
Also LEDs take some time to warm up and flicker while they do so
-
If only the adhesive was as good as the LEDs.
-
These are by far the brightest LEDs I've purchased and specs on these seem to right on, more on this later.
-
great LEDs strip
-
Unfortunately, both products now have sections of dead LEDs.
-
Great product with no dead leds and decent adhesive
-
These are epoxy covered and past experience shows the epoxy will yellow and even burn before eventually burning leds to a crisp
-
The LEDs on this light strip are nice and bright.
-
I may buy another set in the future to see if the adhesive issue is fixed as the LEDS themselves are very bright and worked great
-
I may buy another set in the future to see if the adhesive issue is fixed as the LEDS themselves are very bright and worked great
-
This indicated that the LEDs are fine, but the LEDMO power supply failed
-
They might not reveal colors as neutral as the cooler LEDs but they are more pleasant and we are just using them for closets
-
The LEDs are bright enough, but the Power Supply's are not reliable
-
These LEDs are perfect for what I needed them for
-
These are the best quality IP65 LEDs that I have gotten to date
-
All LEDs are lit, and so more none have died