It works well for minor repairs, such as the time a little vase got blown off a table when the door was open, and broke in 3 pieces.

Also it doesn't bond plastic so if you need to, you can break off a previously glued piece with ease and it will be relatively clean

The cap and bottle fit together like a smooth puzzle piece.

Connecting pieces of PLA together is sometimes a trick

I had a loose piece of carpet that was supposed to be on the door on the driver's side of car.

The same piece is broken apart and did not hold.

This stuff glues very strongly, what there is of it--approximately 1/7 ounce per bottle, more than enough to glue two stamps to an envelope, but it took two bottles to glue a fractured (5 pieces) gourd together.

I have a computer monitor resting on this elevated glass piece held up by 2 thin metal cylinders

I was able to work the pieces of my teapot top together which I hadn't been able to do with other glues

Most recently I glued my bottom gutter elbow piece back to main chute (ok, I'm no Bob Villa), and through several heavy rains the seal has held

(Warning: gluing metal requires surface prep.)As much as I like this glue, the dispenser has a problem

Took it back to A-e Hardware, who hassled and argued with me even though I brought by sales receipt and had purchased less than 30 minutes before.

Took it back to A-e Hardware, who hassled and argued with me even though I brought by sales receipt and had purchased less than 30 minutes before.