• Reviews around wire (3.51 of 5)

    Mediabridge Banana Plugs - Corrosion-Resistant 24K Gold-Plated Connectors - 12 Pair/24 Banana Plugs (Part# SPC-BP2-12)

    • These Mediabridge plugs are much easier to install, fit over 12 gauge wire and are very easy to screw down to secure the wire.
    • I recommend good 12awg stranded wire.
    • Perfect, wired up my whole amp.
    • Easy to install and great to clean up exposed wires.
    • They were simple -- SIMPLE -- to use and make all the difference to keep loose wire filaments from clogging up the back of your receiver or possibly causing a short in your wiring.
    • Am loving the mediabridge speaker wire and sub woofer cables!
    • 12 gauge wire a little tough to "mushroom" wire for plug
    • If you are using extra stiff wire then use the Fospower which are better suited for those.
    • I am not advertising this wire although the wire is awesome too!
    • It takes a great deal of force to pry the wire off of the plug
    • The compression design ( strip about 1/4" lead, slip on the lower half of the connector, fray the wire out, slip on the upper and screw down tight and your done ) locks down the stranded speaker wire down tight, fine stranded wire or low stranded count
    • Plugs worked great and support 12GA wire
    • Very easy and very secure wire
    • Originally bought 24k Gold Plated Speaker plugs from another amazon retailer which did not allow enough speaker wire to connect with the plug.
    • Make good speaker wire connections.
    • From me trying to jam 10gage Monster speaker wires that were way too fat through the receivers 12gage max
    • They worked very well and secured the speaker wire perfectly.
    • these are great, work great in my Harman Kardon and easy to use, wires are secure , requires a little playing with and getting used to but these are secure, just dont pull the wire as you shouldn't with any plugs
    • Excellent quality, very easy to use as there are no screws and no tools are required, you just insert the wire and twist the two halves together hand-tight
    • These work OK, screwing the wires into the terminal, the threads are not the best machined
    • Much better than wrapping wires around a screw post terminal or sticking stranded wire thru a hole
    • Easy installation, secures wires tightly, easy to connect and disconnect.
    • Plugs fit nice and snug in the sockets, I used them for Yamaha and Onkyo receivers and Klipsch and Elac speakers, with #14 pure copper speaker wire.
    • The T-14 wires are not as fine as some speaker cable wires so they did not fold over the portion of the plug with the serrated edges very well.
    • Its a little tricky bending the wires back evenly and screwing the plugs back together - you have to be careful not to strip the wire too far back, but after doing a couple of times it was pretty easy and they appear to be high quality and well made
    • The mechanical connection is great and the wire is securely attached when you twist the two parts together
    • and I like the way the wire is secured within the plug
    • My bedroom used some speaker included 18awg wire and these banana plugs griped the wire tight and work great
    • Plugs are so much easier to manage than screwing down loose wires.