The MIDI Solutions Pedal Controller accepts an effect pedal (or any potentiometer connected to a 1/4" stereo phone plug) as an input and generates continuous MIDI data based on its position

The Pedal Controller may be inserted inline at any point in the MIDI data stream, allowing you to send continuous controller information to any device in your MIDI setup.The MIDI Solutions Pedal Controller can be programmed to send most types of continuous MIDI messages, including Aftertouch, Pitch Bend, Control Change, or even System Exclusive messages with a single variable byte (to control specific synth parameters)

The MIDI channel is programmable as are the minimum and maximum values transmitted.The MIDI Solutions Pedal Controller accurately tracks the position of the pedal or potentiometer connected to it

If the pedal is moved very slightly, the Pedal Controller will send an update even if its position has only changed by a single value

Many cheaper control wheels or knobs only update themselves every 2 or every 4 values, resulting in zipper noise.Another unique feature of the Pedal Controller is its ability to add a variable amount of curvature to the response of the effect pedal

This allows you to correct for pedals with nonlinear responses, or to add greater response at one end of the pedal compared to the other.The Pedal Controller is programmed by sending it MIDI System Exclusive messages

Once programmed, its settings are retained even after power is removed.The Pedal Controller is MIDI-powered and requires no batteries or power supply to operate

A MIDI indicator LED lights up when the unit is powered and flashes when MIDI data passes through it..