Whydis Logo
Computers & Accessories Tablets

  • Reviews around heat sink (1.34 of 5)
    ★★★★★
    ★★★★★

    Miuzei Case for Raspberry Pi 3 B+ with Fan, HDMI Cable, 16GB SD Card, 2.5A Power Supply and 3 Pcs Heatsinks for Pi 3 B+, 3 B, 2, 2 Model B

    • The heat sinks are nice, and the heat sink for the ram is far above the rest (flat piece of copper for the others)
    • They provide you w 3 heat sink's on of which hits the fan mounting hardware
    • The case fan and the heat sinks are great additions.
    • With the addition of the switched power supply and the 3 heat sinks, a person just needs to purchase the Pi board, micro sd, video cable, and be on ones way about it
    • The screw with the nut on it hits the heat sink and will not allow the top layer of the case to fully seat.
    • The case sits a little higher then most cases, but allows for clearance for both the heat sinks and the fan to be installed
    • The heat sinks and fan do help a lot for overclocking.
    • The only issue I had with it was the fan makes contact with the heat sink and will not run.
    • Appreciated being able to install a veined heat sink on the RAM chip on the back side of the Pi board.
    • The included fan, heat sinks, etc all were as described.
    • I love these cases as they include all 3 heat sinks, a fan, plus the power supply with the on/off button.
    • it includes three heat sinks besides the fans that seem to be working well enough on their own.
    • It works great to show off my new "toy" and I'm confident the chips are staying cool enough with the 3 heat-sinks and active cooling (fan)
    • It did not come with the heat sinks
    • The added heat sinks and fans really make for a nice Raspberry Pi case.
    • I like that it comes with heat sinks, fan and switched power adapter
    • The assembly of the case, the pi, heat sinks and fan went fairly smoothly with one exception;
    • It looks cool, and the inclusion of a fan, heat sinks, and power supply that is appropriate for the Pi 3 Model B+ is great.
    • The heat sinks are nice, and the heat sink for the ram is far above the rest (flat piece of copper for the others)
    • had I added them at the appropriate time during assembly to use the case molding as a guide to line up the heat sinks.
    • The case is sturdy and meshes well with the heat sink and fan.
    • the fact that this case came with the fan, heat sinks and power supply all ready to go made it a no brainer
    • The heat sinks are solid, the fan is more than adequate, and the on/off switch on the power supply cord is a must!
    • For the same price I paid for my other case and charger, I got a charger, case, heat sink, and fan
    • Add to that that it comes with a fan, heat sinks, and a switched power supply
    • please note in pictures:***note: the third layer 180 degrees wrong (check this first)***if you are unable to attach the following:power plug is to low to plug in adapteradapter is to thick to plug into plugcase needs to be modded or plug needs to be raised but due to heat sink and fan plug cannot be raised (unless you can solder) so said case need modding or mod adapter1 note: the third layer 180 degrees wrong (check this first)2 modified case with DREMIAL to allow plug to insert by notching area around
    • The heat sinks are solid, the fan is more than adequate, and the on/off switch on the power supply cord is a must!
    • the fact that this case came with the fan, heat sinks and power supply all ready to go made it a no brainer
    • It's a perfect fit for the 3B, and the access slots and heat sinks are nicely designed.
    • The pictures are not from a top down prospective and its not clear as to what piece needs to be added next
    • n’t go wrong.