The worst step drill bit I have ever paid for

Works great, pretty much the same as the deWalt bit at Lowe's they charge $50 for.

This bit was barely sharp

The little dent the 1/16 bit made was plenty to get started and keep the step drill bit on target

Unfortunately the bit burnt out at just under 3/4" on the first hole.

Take your time and let the bit do the work

excellent bit, very well built

Great drill bit.

Honestly, for the original one-off use it was great, no need to spend the money on a better bit if you'll only use it once

It drilled as smooth as silk and can't complain one bit

First off there are much better step bits out there, but for a fourth of the price this is an excellent bit

Tried drilling a 1 inch hole in a drum using oil to keep bit cool. couldn't get passed the second step in the bit

A standard bit would have likely worked better in a confined place.

went to Home depot purchased a better step bit.

This is probably the worst uni bit I have ever used

This bit works great.

Don't recommend this bit unless your planning to use if for one or two holes.

But it was 25% the cost of a like drill bit at a local big box store.

This was not a very good bit it did not cut and overheated even with cut

good bit, hardness is good

Excellent bit; I've used it for a number of jobs, and it continues to cut well.

Doing this it took probably between 5 and 8 minutes to drill the hole and the bit never got hot to the touch (touched it every time when stopping between lubrication

I used no lubricant and took about maybe 10 minutes to drill not over working the bite

and it's seen a good bit of use now

The worst step bit I've used so far.

Initially it was a good bit and did the job at hand but after 30 days and maybe 15 holes drilled it has become extraordinarily dull rendering it kinda useless.

This is a great quality bit and I 100% recommend it.

The bit worked perfectly for the 5 minutes that I needed it for.

Did not apply excessing pressure to drill and used oil to cool bit.

Made quick work of it, and after drilling like 8 holes, the bit is none the worse for wear.

I needed an exact hole in Luan mahogany sheathing and this bit was sharp enough to do it without ripping up the surface.

Be sure to follow the recommendations of other reviewers: take your time, use a slow drill speed, and don't let the bit get too hot.

The bit is now so dull its unusable.

Good bit for the money

This bit is junk in my opinion

The bit never got hot at all but still will barely make a dent in the stainless

Heat dulls the bit real quick so low speed letting the

the bit was sharp and took seconds to get my job done.

The brew pot killed the bit

Only used it for one job on a car roof so far but it workes just as well as a $50 bit

This bit immediately became dull and would not cut into the edger blade at all

Great bit

It's also nice to have a stepped drill bit on hand, one bit covers several sizes.

Amazing drill bit

Bought it to drill through a stainless brew pot... worked, but I nearly trashed the bit doing so

but I LOVE this bit

When I got about 3/4 of the way through, the bit was not very smooth - not like my other name brand bit.

Only reason not 5 stars is the coating on the bit came off with first use and chatters a bit.

Good drill bit, I drilled several holes in stainless steel with

So far this has been a good bit

Good, cheap drill bit

This bit works really well

Great drill 👍 bit

shipping was fast, bit burned up before I got the second hole drilled

I have only used this drill on plastic, which isn't exactly the best test of durability, but it is a solid and sharp bit, titanium coated, and the steps in sizing are well-marked

I increased two drill holes easily which took an hour, again slow and using cutting oil will help you!Good bit!

Watching videos on the internet on how to do this, a good drill bit should have done the job in ten minutes tops.

useless bit in my opinion.

But the bit did rapidly lose it's cutting edge no matter how careful I was not to burn it up

Only used it once so I can't speak to durability but the bit still looks plenty sharp

Great drill bit, easily cuts through most surfaces

All work well and the bit stays sharp.

Strong bit, good price

GREAT bit, no issue with heat or it burning up at

This drill bit work

This bit really didn't work at all for me.

Had a much more expensive bit before and this does the exact same job and performs the same

Highly doubtful this bit could go all day every day in an industrial context, but for the couple of holes I needed in my 18ga stainless steel sink for the garbage disposal air switch and the soap dispenser, this little bargain bit did it just as well as the 50$ one from the big orange store

This bit looks strange to my eye but is nothing short of wonderful.

Hopefully I didn't damage the bit by running it fast and hot the first time.

probably the worst drill bit I have ever bought

This is the worst drill bit I have ever used

The bit's pretty much useless to me now; it got worn after one use at one of the smaller steps.

But if you’re like me, and just *might* need to drill large holes in sheet metal or plastic from time to time, this bit should work fine for a good while, as long as you don’t abuse it.

Sharp biting action carved out holes fast

Worked perfectly, great bit.

Worked perfectly, great bit.

This bit worked perfectly for drilling an aluminum stock pot to install a bulkhead and spigot.

This bit is great

GREAT bit, no issue with heat or it burning up at

Kept the bit wet and it punched through to the desired size with no problem

The bit did a great job, no problem at all.

Great bit for the price

Didn’t even make it through one hole before the bit was garbage

I could've been doing something wrong or I could've gotten a bad bit.

Great price, bit works as advertised.

Used once and the bit was trash

The first one I opened wouldn't cut at all, simply dulled the bit on 1/16th inch thick steel

This bit worked great

This bit is nearly unusable after infrequent use over a few months.

great step bit