Makes soldering a lot easier

With this flux however, I am getting perfect solder joints with lead-free solder

Best solder flux I have ever used!

The soldering was much easier

Wick will really suck up the solder and the pad will be clean.

Excellent rosin core flux for my small, delicate soldering jobs.

I use 60/40 rosin core solder and the additional dab of this flux guarantees a clean, solid solder joint.

Works great and is a must for proper soldering

Therefore, I bought this paste, expecting it to improve the soldering

and it makes the wires take the solder so much easier.

Not that great for fine soldering (ie surface mount).Pros:- very effective at wetting tin-lead solder- works well for cold-soldering (ie soldering to an unheated battery terminal)- great for soldering wire splices, through-hole, etc- good for cleaning/refreshing you iron tip (I use cheaper flux for

Excellent solder flow and solid connections.

I have a terrible soldering

Without it, the solder is not going to work well, and most likely it will fail.

When I make a bad solder connection, a little dab of this on the end of a toothpick lets me reflow the bad joint quickly and easily

The video I uploaded is just a short video, the test was more extensive with 3 different kind of solder alloys 60/40 no flux core, 60/40 with flux core and lead free 96.5/3/5 and with all 3 Flux #135 performed just fine soldering 805 SMD as well as through whole semiconductors

This is a perfect flux for soldering delicate electronics and all other kinds of electrical work

soldering is much easier now.

This stuff works the best when soldering electrical wire

Like magic, this combination sucked up the solder and allowed me to remove the components with no problems.

Very versatile rosin core paste for older and slightly tarnished lands and cold solder joint repairs.

No cold solder joints or melted parts.

It helps to make nice solder joints.

Needed for correct electrical soldering application.

The first and last thing you will order for a good solder joint

Solder flowed fast and easy, cleans up quickly q tip and alcohol.

Gives that fast ability to suck the solder into the wire strands.

Solder flows easy and helps make a good solder job

This has been wonderful for the few electronics projects I've had over the last year, definitely makes it easier to get a good solder joint.

No more nasty solder balls.

I got the hakko fx888d as my first soldering station,but the solder wouldn't stick well onto the board since the rosin flux in the solder burned too fast(I couldn't solder by heading the board pad since it was way too small)

It makes the solder act like a

Finally it dawned on me that maybe the flux core in my no-clean solder was not doing the job.

Produces great solder joints.

The Rosin helps protect the solder joint against corrosive attack, and the paste form insures that the flux stays put until soldering

YES it will suck the solder into the strand of wires

Some of the best solder that I have used for many years.

Good investment and time saver when soldering.

I got the hakko fx888d as my first soldering station,but the solder wouldn't stick well onto the board since the rosin flux in the solder burned too fast(I couldn't solder by heading the board pad since it was way too small)

I was looking for an affordable soldering paste for my hobby projects this rosin works great

Tarnish the solder.

must have in order to do clean work as far as soldering

It helps my poor soldering skills and solder 3 xt30 connectors without any difficulties.

Just a dab and the solder flows like water.

I use lead free solder

So I used this flux and laid in a small amount of cold solder before bringing the work pieces together and applying heat.

Really helps get a good, clean solder joint

Like magic, this combination sucked up the solder and allowed me to remove the components with no problems.

I never understood how many get the perfect soldering and so evenly until I saw a youtube video that specified this particular flux

Great for ensuring good solder flow and a first rate solder joint on electronic circuit boards in conjunction with rosin core solder.

I use the best audiophile grade solder with flux/rosin core and have a good soldering station.

It does what rosin should do as far as soldering is concerned

Helps make a secure, bright solder joint

I like this product because I can use something like a toothpick and apply it in very small, precise amounts when doing fine soldering work (headphone jacks, cell phone components etc)

Without it, the solder is not going to work well, and most likely it will fail.

I have been happily using this flux to help solder wiring and components in older communications equipment and just a dab on the end of a toothpick and applied to the wiring or joint gives a good solder flow.

Not that great for fine soldering (ie surface mount).Pros:- very effective at wetting tin-lead solder- works well for cold-soldering (ie soldering to an unheated battery terminal)- great for soldering wire splices, through-hole, etc- good for cleaning/refreshing you iron tip (I use cheaper flux for

As good as any solder flux I have used before.

Great helped my soldering to adhere stronger

Makes for a great solder joint

Makes soldering and wicking of solder much more effective

Very good solder for sure.

No Clean lead solder from SRA Soldering ProductsThe small diameter (.020) and tin to lead (63/37) makes this solder very easy to use

I make some electronics projects for my own use, and I had tried lead-free solder previously but just did not like the way it flows, or does not flow is a better description

I just used this with some lead-free solder

Never knew about this stuff until I watched a YouTube video on proper soldering

I didn't know how much easier it makes soldering

The solder flows great with this past.

I am big into hobbies like RC cars, RC helicopters and planes and this is the perfect stuff as long as you have a good soldering iron to accompany its use.

I am so glad I decided to buy this because just like the video stated after heating up the wires and the flux, the solder just melted like butter and so evenly

It makes creating good solder joints stupid simple

Tends to leave a difficult to clean residue, but provides superior wetting & adhesion in cold-soldering

Amazing stuff, goes on great, goes a long way, burns off just right and stays on long enough to get a good solder

This flux helps make the proper solder joint

Best soldering flux I have used in a while.

You gotta have it for good clean solder projects, especially larger wire

I've been doing electronics and RF work on and off for 30+ years and can't stand poor soldering.

Makes my solder joints look neat and shiny!

If you're about to quit soldering or working on a project that you're gonna give up on, give this a try before you do

Truly a life saver when soldering

It makes creating good solder joints stupid simple

Dull solder joints are bad work.

This is what is needed for soldering larger items along with good solder.

Has been nice to use to reflow solder on my flight controller, to improve my solder joints

No-Clean Solder Wick).

I just dab some on the wire to tin,then some more after to the wire and the pad,and I put the solder from the iron(not the correct