Whydis Logo
Computers & Accessories Tablets

  • Reviews around compound (4.14 of 5)
    ★★★★★
    ★★★★★

    Thermal Grizzly Kryonaut Thermal Grease Paste - 1.0 Gram

    • Due in no small part to the iffy and well documented tension system the stock thermal compound just wasn't sufficient, let alone acceptable out of the box.
    • Very good thermal compound
    • Hands down the best thermal compound I've used
    • Did all the back and mid plates, heatsink, mainboard, fans, cleaned off the old thermal compound and reapplied some of this new Thermal Grizzly Kryonaut compound
    • This thermal compound is EXCELLENT
    • I just got a refund on some Noctua NT-H1 which was disastrous (dried up, no cap, clogged nozzle, messy, thick compound) but needed to finish my laptop CPU repaste so decided to pay the extra
    • It also comes with a cute little spatula for spreading your delicious thermal compound!
    • Don't get me wrong, it is good thermal compound, but I believe that once you get to a certain point, nothing short of de-lidding the CPU and using liquid metal will make a noticeable difference in temps
    • Also used it to replace the stock thermal compound on my Corsair water cooler with great results
    • This is the best thermal compound you can use next to liquid metal, which isn't recommended to be used on top of an IHS anyways
    • Probably the best non-conductive Thermal compound on the market, saw a temp drop of about 10 degrees Celsius on my Razer Blade Stealth laptop after re-pasting the CPU
    • It has a cap that came sealed, so the compound is fresh for use
    • The compound is very easy to apply even for the novice technician
    • Excellent thermal compound
    • A very good thermal compound, if a little bit too expensive.
    • A very good thermal compound, if a little bit too expensive.
    • Probably the best non-conductive thermal compound in the market right now.
    • Max core temp after 1 hour Aida64 stress was 60°C, pump and fans on quiet preset
    • On my intel 6700k, after re - assemblying my build it dropped about 30 C, now it has a limit of 60 C on full workload, when rendering it reaches the same limit with 60 C, a couple of times reached 65 C this stuff works, and works great, I'm really happy with my purchase
    • On my intel 6700k, after re - assemblying my build it dropped about 30 C, now it has a limit of 60 C on full workload, when rendering it reaches the same limit with 60 C, a couple of times reached 65 C this stuff works, and works great, I'm really happy with my purchase