• Reviews around cpu (3.26 of 5)

    Thermal Grizzly Kryonaut Thermal Grease Paste - 1.0 Gram

    • 1 gram was enough to cover the CPU and GPU die with a healthy amount
    • I ran many tests before and after application of the Kryonaut and saw some excellent results (CPU throttling and 99°F before, then 88°F and no throttling after).I did some tests 5 months after application and it's not as effective as it was initially
    • I'd highly recommend this if you are considering a PC build, or to cool your CPU significantly.
    • Keeps my cpu cool!
    • If you want thermal paste that will keep your cpu as cool as it could possibly be, regardless of overclocking, then buy this and never look back.
    • It's thermal paste, the CPU is running cool, would buy again.
    • I went with it, as I appreciate the extra cool cpu for the extra performance on my overclocked i7-8700k
    • I even heated it up as per instructions but maybe the cpu was too cold
    • Highly recommended; you won't be crying about hot cpu thermals with this cool paste
    • Need a cooler CPU
    • my cpu idle temp is around 25, thanks
    • CPU throttles
    • i have concluded that this paste leaves dents and scratches cpu and heatsink
    • With how hot CPU's get these days (especially your 8700k's) why mess with anything less
    • I think this is a good investment, since it can give a lot of performance for not nearly as much as a fancy CPU cooler.
    • Both CPU's are cooled with 280mm AIO's and admittedly but,I do keep the fan RPMs down because I hate
    • Put this on my MacBook Pro 2012's CPU/heat-sink assembly, and this did absolutely nothing
    • My CPU is running very cool, don't look any further
    • Max core temp after 1 hour Aida64 stress was 60°C, pump and fans on quiet preset
    • On my intel 6700k, after re - assemblying my build it dropped about 30 C, now it has a limit of 60 C on full workload, when rendering it reaches the same limit with 60 C, a couple of times reached 65 C this stuff works, and works great, I'm really happy with my purchase
    • On my intel 6700k, after re - assemblying my build it dropped about 30 C, now it has a limit of 60 C on full workload, when rendering it reaches the same limit with 60 C, a couple of times reached 65 C this stuff works, and works great, I'm really happy with my purchase