• Reviews around bite (1.75 of 5)

    VideoSecu Tilt TV Wall Mount Bracket for most 37 to 70-Inch LCD LED Plasma Screen Display up to VESA 400X400 684X300 700X400mm with HDMI cable, Bubble Level MP502B 3KR

    • i must say THIS IS AN AMAZING PRODUCT comes with instructions and all hardware you need a ratchet or you wont be able to install plus a drill with the right bit
    • Like many people who purchased this mount I was a bit skeptical about ordering it
    • And another tid bit of advice from someone who gets paid to fix other people's mistakes-
    • It's a great buy and every bit as sturdy as a $129.00 mount from a big box retailer.
    • I must say, I was a bit skeptical at first, considering I've seen mounts like this sell for well over $100.
    • As others have indicated the lock screws are a bit difficult to reach with fingers/hand and a standard Phillips screwdriver, especially if you have the TV tilted forward.
    • It's a bit tricky to access the back of your TV with it mounted, make sure you have all the cables you need installed before attaching your TV to the mount
    • The only slightly difficult bit is trying to screw the safety bolts, but it can be done with some help from someone holding the TV away from the wall.
    • If there is one thing I found a bit difficult is to tighten the screw in the bottom of the bracket, you need to tighten two of these to secure the TV (once mounted) in place
    • Hard to install and a little bit out of range
    • My old mount had a lever lock I could push with with a long stick, much better design and every bit as stable, but it wasn't rated for the new 70".
    • The mechanics of how it went fit and the easy of making adjustments to the tilt while on the wall are a bit lacking as well.
    • Like many people who purchased this mount I was a bit skeptical about ordering it
    • After opening the package, I was a bit skeptical that this mount would hold our new 70" Smart TV weighing roughly 100 lbs
    • Tightening the lower set of screws to fully lock the TV in to the mount was a bit tricky since I had angled the TV downward
    • and I was a bit skeptical.
    • I was a bit skeptical before purchasing this one but after watching some youtube videos of the product I decided to give it a
    • but actually when you mount the tv to the mount it is a bit difficult to tighten the bolts to make sure the TV is secure.
    • felt a bit difficult to fasten them as it gets difficult to reach them with the TV
    • Wrangling the TV up to the wall was the hardest bit
    • Its a bit difficult to adjust the tilt while its on the wall, but I suppose that can be done before you install it.
    • It's a bit difficult to mount it completely straight (ours is slightly crooked) but that's our own fault
    • It's a bit hard to reach and set, but the TV seems to be at a great angle when installed, and the locking screws at the bottom hold the TV set to the mount so it can't fall
    • great i like it
    • Simply put, because of the limited space behind the wall mount, and because my TV is so large, it was quite difficult to set it in place and screw the bottom two to clamp down the TV (I constantly scraped my knuckles onto the wall as I twisted and turned to get my screwdriver in there)
    • n’t fit well together