This is one of the better invests i have done, product is working perfectly and is so strong, 100% recommended.

I assembled it really easily and the motor works great, with 3 presets to it

Very strong, very well designed, very much recommended!I built a custom top out of 9x 1x4's of White Pine, biscuit joined together, sanded, stained, sealed

Excellent desk, well built with a good overall design and an excellent value in a sit/stand base

this is so well designed, that it sleeps and doesn't just leave lights in front of you all day

This is not a big deal if you are taller or long in the torso but for a better design would be to consider the fact that a desk top will be attached and set the lowest setting to about 27" which will put the desktop at 28.5".

The tabletop I used is two separate pieces and it worked out fine because of the brackets I had to hold them together

It can be placed in the middle of room and be a totally autonomous, solid piece of furniture

Bought the following coffee table for the desk top, and used the bottom piece of wood for the top piece of the coffee table!https://www.amazon.com

and I can honestly say it's my favorite piece of furniture in the home

The single can hold my massive tower and dual monitors, plus a 32x80x1.75 inch solid piece of maple.....and myself

I had the legs on my table that were about to give up, but the table itself is made of wood and has a nice finish - this was the perfect product to replace the legs, and get additional funcitonalities!I have to admit, I rarely use the raise functionality, but it's nice once in a while when you want to take conferance calls in a different posture

We decided not to put a finish on the block because we liked the look and again, we’re not savvy in the build furniture by yourself category

n’t had any regrets with it, that is, beyond the occasional joke from co-workers!

This is one of the better invests i have done, product is working perfectly and is so strong, 100% recommended.

I had the legs on my table that were about to give up, but the table itself is made of wood and has a nice finish - this was the perfect product to replace the legs, and get additional funcitonalities!I have to admit, I rarely use the raise functionality, but it's nice once in a while when you want to take conferance calls in a different posture

Fantastic Product, quiet, and can be made portable very easily.

This is one of the better invests i have done, product is working perfectly and is so strong, 100% recommended.

I like that it gradually speeds up when it starts moving and slows down as it approaches its target height (either the min, max, or a memory height you have saved).

Bought the height adjustable frame and installed it over a weekend

This is a great frame and just have to put the table top on it.

The frame is sturdy & took me around 20-40 minutes to figure out how to put it together

Well, I appreciated that the frame itself was fairly easy to construct

I like that it gradually speeds up when it starts moving and slows down as it approaches its target height (either the min, max, or a memory height you have saved).

n’t had any regrets with it, that is, beyond the occasional joke from co-workers!

This is a great frame and just have to put the table top on it.

I had to get creative with adapting the frame to my table top, as it

I combined it with a bamboo table top from IKEA and the assembly was very easy.

The only reason I am not rating it higher is once you put a desk top on it the lowest it will go is about 30" which is a little taller than a standard desk/table height.

Bought the following coffee table for the desk top, and used the bottom piece of wood for the top piece of the coffee table!https://www.amazon.com

This is not a big deal if you are taller or long in the torso but for a better design would be to consider the fact that a desk top will be attached and set the lowest setting to about 27" which will put the desktop at 28.5".

The lowest height is actually 29 1/4 inches which is pretty high, especially since you will typically add another 1 inch when you add the desk top

My only other complaint is that I wish the battery holding thingy was on the opposite side, I have a small desk top & basically the cage that holds the battery is right at my knee

Overall the stand is well worth the price, and i'm satisfied with the purchase.

This allowed me to make a very nice standing desk for $350.00 using an Ikea bamboo table-top

Although this lifts my existing desktop up to a reasonable standing height and mostly does what it advertises to do, there are a few thing I'd like to address.- The low setting is actually a few inches higher than my old desk

Overall the stand is well worth the price, and i'm satisfied with the purchase.

I like that it gradually speeds up when it starts moving and slows down as it approaches its target height (either the min, max, or a memory height you have saved).

Excellent desk, well built with a good overall design and an excellent value in a sit/stand base

I like that it gradually speeds up when it starts moving and slows down as it approaches its target height (either the min, max, or a memory height you have saved).

Good quality, good value, good weight limit, easily customizable, and easy to use

Add in the wire management tray, on top of the quality and reliability, and this is a great value for anyone looking to convert their regular desk to a standing one

The build quality is great and I have no wobbling when the desk is raised

The tray that comes with it to hide your cables and whatnot is great as well, good quality and nicely designed (not a cheap and flimsy plastic like some of the

I like that it gradually speeds up when it starts moving and slows down as it approaches its target height (either the min, max, or a memory height you have saved).

Besides that it's definitely worth the purchase, it's sturdy and has excellent quality.

But I have expected a better quality for the money I paid for