-
It makes it nicer when going from stranded to solid wires.
-
Ever try to bend and manipulate 5 twisted wires with a cap
-
Larger wire nuts take up too much space in box and are difficult to use when combining stranded and solid wire.
-
The wire failed before the connector failed
-
Yes they cost more than cheap wire nuts but well worth the few pennies additional!
-
I have found these to make a daunting task that had the risk of blowing apart your wire nut due to strain and pressure, or not being able to get your smart switching mounted in a box without serious strain, into something of ease.
-
What I really like is that it is possible to connect solid and stranded wire
-
Much more compact than wire nuts and more foolproof.
-
I found they were especially useful when connecting solid wire to stranded wires such as those found on lighting fixtures and fans
-
If you don't like wire nuts, these are for you!!
-
I've always disliked using wire nuts to connect more than three 14 gauge wires
-
Sometimes regular wire nuts are preferred if space is at a
-
Seem to be a tight connection, but I have noted that the solid wires will rotate inside the nut when moved around
-
So much easier that wire nuts, and the make a secure connections.
-
Stranded wire locks in place, but not as well as solid wire & lever can open up slightly on stranded wire when installing other wires, especially on the smaller gauge wires, make sure to twist the stranded wires before locking in place.
-
With the snap top to secure the wires in place gives the confidence our wires will not slip out in the future.
-
Very nice way better than wire nuts
-
Tried the push type connectors first and they work well for solid wire but not so good for stranded wire
-
If your project involves connecting multiple wires of different gauges, as well as solid and stranded, this is your solution.
-
Works great with solid and stranded wire.
-
Stranded wire locks in place, but not as well as solid wire & lever can open up slightly on stranded wire when installing other wires, especially on the smaller gauge wires, make sure to twist the stranded wires before locking in place.