The buttons are accessible and the touch pad responsive

The mute button and charging port can be a little tricky to open, but overall it works very well (and the screen protector is excellent quality, even the part where you scan your fingerprint works well).

The pictures uploaded shows the case with my phone inside and the vibrate button concerning the comment I made

All buttons work all holes are perfect with the ports and come with plugs for when not in Use protect it

All the button covers work very well

It’s well thought out, with soft but sealed buttons covering the three physical side buttons (volume up, volume down, and the power button) of the iPhone 6, and an access port that allows you to reach the mute toggle (although you’ll want to make sure your finger nails are a bit longer than mine if you want to toggle the mute switch back and

The buttons on the side for volume and power are easy to operate and have no issue with them

The phone case is sleek and minimal and protects the buttons and charging and audio ports.

Also all the buttons, charging dock, etc are completely accessible.

The buttons that are on top of the lock/unlock button and volume buttons are very responsive

The button covers respond well when you push on them

While the headphone jack and lightning cord slots have the flaps to protect the ports, the silent button is not covered and I can see debris entering that area over time.

Great fit, clean look and the buttons are not hard to press down to function.

Another thing to note is that it is tight on your phone and I had to be careful to not harm my volume buttons.

The buttons and plug covers are easy to use, as well

Sadly the 'silent' button does not have a covering

All buttons are accessible and covered- Headphone and lightning ports are covered- Fingerprint sensor is covered and still usable with no noticeable degradation of the sensor- Adds grip to minimize the phone slipping out of your handCons:- Clear case makes the phone look awkward and appears

Some phone cases are too rigid for this type of use where you can't even tell if you hit the correct control button

Pros:-complete protection-covers ports-clear-thin-not too bulkyCons:-ringer button is hard to reachOverall its good case, it doesn't add much weight to the phone too.

The buttons feel nice

My only con for this case is the vibrate button is exposed

There is a "soft" button cover for the on/off, and volume buttons.

It is really slim and does not add very much bulk to the phone (I left Otterbox mainly because of this - and a faulty initial design for the 4s).The buttons are really easy to press and it has plenty of

First of all, the Lock and Volume buttons are improved from the Triennium 6S case

The fit is great, buttons, including Touch ID, all work fine

While it does protect the home button from water etc it also causes the occasional issue with the fingerprint scanner.

Also due to the material type, the unit doesn't tend to slip down the mount as you drive as some cases do (the Apple Leather case is not wonderful for this mount, it tends to slip down slowly with vibrations).All buttons work very well, and have tactile feedback

Also due to the material type, the unit doesn't tend to slip down the mount as you drive as some cases do (the Apple Leather case is not wonderful for this mount, it tends to slip down slowly with vibrations).All buttons work very well, and have tactile feedback

It does not cover the silent button on the

Pros:-complete protection-covers ports-clear-thin-not too bulkyCons:-ringer button is hard to reachOverall its good case, it doesn't add much weight to the phone too.

All buttons are easy to push, and it feels like it really really protects your phone

The buttons were pretty easy to press and the openings for the speakers and headset were perfect

The buttons on the side are easy to access and not as readily missed as some cases are

, all buttons work very well and glass cover is very responsive to the touch feature

I like how the buttons also allow for the naturally clickiness of the buttons to shine through, as opposed to other cases that muffle the button clickiness

If you only use the provided lightning cable, this might be the perfect case with excellent tactile buttons!

I've also had to take off the film that protects the home button because it was getting warped from cleaning

It was simple to put on, the buttons are in the correct spots and the protective plug for the Lightning connector works great

The ridges round the front of the case makes getting to the home button slightly harder to get to especially if you are use to just placing your finger on it

The port covers are easy to open, and the buttons are very easy to operate

The buttons on this case are also very easy to use, unlike other cases that make it hard to get the button to work

The home button part of the case has a sticky substance under it, and the other buttons are very stiff and hard to press

Pros: thin, easy to get in and out of a pocket, still has a good grippy feel (not too slippery), good tactile feel on the screen, all buttons are easy to get to and react quickly, power port is large enough for aftermarket power cords, price

It's thin and not bulky like some cases and the buttons are easy to use behind the protection

The mute button and charging port can be a little tricky to open, but overall it works very well (and the screen protector is excellent quality, even the part where you scan your fingerprint works well).

Excellent clear case, all buttons an ports are easily accessible.

Every button and port was fully accessible with the case on, and the camera cutout was lined up perfectly

all the buttons work fine, fit and finish is good.

The buttons are very easy to press and use as well

But I like this cover feature because it protects the home button from getting dirty and damaged

Buttons for volume and on/off, but open hole for vibrate/ringer button and back camera

The buttons are elevated just enough to be easily useable

I am not impressed the design of the iPhone 6 as it is hard to hold and the buttons and not well placed or designed

This case fits nicely, the screen protector is great, and the buttons are easy to locate and responsive.

The buttons were flawless and the fit was perfect

No problem!Other cases that I've had in the past annoy me with how tricky it is to get to the silent button, or power charging dock.

The buttons are no problem to press with the case on

i think need to be improved:The silent button doesn't have a cover

All the buttons work well

I am not aware of any other cases that protect the home button, so I don’t want to penalize this case for doing so in a way that preserves the Touch ID functionality, but just be aware that this part of the case isn’t executed perfectly

ALL the buttons are laid out perfect

All buttons are available and the charging/headphone ports are well protected from the elements.

All the buttons and ports are accessible, even the fingerprint scan works fine with the screen over it

and I give it 4/5 stars only because the rocker button is exposed, when every other button is protected.

The buttons line up well, as well as the ports for the camera, headphone, Lightning and speaker

The buttons are responsive and it has a great screen protector

However, no flap for silent button.

The buttons are accessible but it does require additional force to

all work well using the case's raised buttons.

But the Alixo case is so light and slim that I find I don't mind it, and when I switched it out for a silicone sleeve I found that the buttons were harder to press through the silicone than with the Alixo, where the buttons work perfectly, so I actually put the Alixo back on and there it has stayed ever since

n’t work…Pros:• I purchased the see-through

n’t lose them,

n’t work…Pros:• I purchased the see-through

n’t lose them,